This sink is very shallow. That, and the shape of it, make it totally impractical. Every time you wash your dirty hands, you have to clean up around the sink. If you want something super stylish in a low-traffic area, then go for it, but if you need a real working sink, this ain't it.
The hole for the sink should measure 18" front to back and 20.75" side to side. the rim of the sink is nice and large though. It would definitely cover the whole cabinet but not sure about how well it will install with the extra depth front to back.
Hello, my name is Ana, I am with Kohler customer service and I can help you. K-2381-8-0 please visit link: http://www.us.kohler.com/webassets/kpna/catalog/pdf/en/1086478_4.pdf for further assistance on specifications for this sink.
Thank you for your inquiry. This K-2381-1-0 Kelston Bathroom Sink has an overall measurement from the top to the very bottom of 5-5/16". If this is not enough detail, you may wish to refer to the More Info. tab on the product page as it contains the specifications document which allows you to view the bowl depth.
Greetings Juji, My name is Tom, also known as HD116 at Home depot's How To Community. In looking through vast number of reviews, I found that while it is possible to install the Pegasus Bamboo faucet in this model, it is installed and held stationary by using the center as well as the "old holes" in a standard 4" spread faucet. You could supplement the installation by putting a bed of clear silicone to help hold it in place. You may consider using a 3 hole replacement sink instead of a single hole if you are uncomfortable with using silicone to help holding it in place.
Hi Thankful for your help. Thank you for asking. Unfortunately your cut-out is too big for this sink. The cut-out specifications for this particular sink are Cut-Out Below Counter Height (in.) 15.375 and Cut-Out Front to Back Depth (in.) 1.875 in Cut-Out Left to Right Width (in.) 13.1875 in. Ive narrowed a searched down as much as i possibly can for you. You will still need to go thru them and look for the exact dimensions that you need. Another option is going into your local Home Depot store and speaking to one of our bath and kitchen professionals. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376. http://www.homedepot.com/h_d1/N-5yc1vZbz9j/h_d2/Navigation?catalogId=10053&langId=-1&storeId=10051#/?c=1&12l3=12l3&2bcops=2bcops&1z140hb=1z140hb&2bcors=2bcors
Hello, my name is Leah with KOHLER Customer Service. I am happy to assist you with your sink question. I apologize you were unable to find the information you were looking for. The Kelston sink, model 2381-1-0 does have a flat back. It could be installed flat against a wall if properly sealed. Please work with your local Home Depot for pricing and availability on any product purchase. Thank you for choosing the Bold Look of KOHLER.
Hello, my name is Heather with KOHLER Customer Service. I am happy to assist you with your bathroom sink question. K-2381-1-0 is a self-rimming sink and will not sit directly on top of the vanity, but rather will drop into your vanity. If you are looking for a sink to sit directly on top of your vanity I would recommend an above the counter sink. K-2530 is a 23-5/8” x 15” fireclay above-counter bathroom sink. This sink has the closest measurements to the K-2381-1-0. For additional assistance on this inquiry, please contact our Customer Care Center at 1-800-4KOHLER. (1-800-456-4537) Thank you for choosing the Bold Look of KOHLER.
Thank you for your inquiry. Yes self-rimming sinks can be installed into vanities.
Hello, my name is Leah with KOHLER Customer Service. I am happy to assist you with your sink question. I apologize you were unable to find the information you were looking for. The Kelston sink, model 2381-1-0 could be installed flush against a wall. Please work with your local Home Depot for pricing and availability on any product purchase. Thank you for choosing the Bold Look of KOHLER.