#1 Home Improvement Retailer

Internet #203579240

Model #J2103S

Store SO SKU #1000501714

Bulldog Straight-Cut Aviation Snips

$2699
Apply Now
Pay $1.99 $26.99 when you open a new card. info
Apply for a Home Depot Consumer Card
  • Bulldog straight cutting snip has high-strength steel blades
  • Soft-touch grips offer maximum control and comfort
  • Cuts 16 ga cold rolled steel and 18 ga stainless steel
  • View More Details
How to Get It

Frequently Bought Together

+
+
Price:
$2699

Product Overview

The Klein Tools Bulldog Snips are used to cut 16-Gauge cold rolled steel and 18-Gauge stainless steel. Soft touch aviation grips provide maximum control and comfort. The blades are made of long-lasting serrated forged steel for superior strength and durability. Tip-Ident on the handles and color-coding allow for easy identification of the cutting pattern.
  • Straight/wide curve cutting pattern
  • Premium corrosion resistant handles
  • Forged steel cutting blades for superior strength and durability
  • 7/8 in. (22 mm) cut length
  • Made in the USA
  • Click here for more Klein Tool products
  • California residents

Additional Resources

From the Manufacturer

Compare Similar Snips

current product
Bulldog Straight-Cut Aviation Snips
Electronic Filament Snip, 5-Inch9 in. Right-Cut Right Angle Aviation SnipsOffset Compound Tinner
BrandKlein ToolsKlein ToolsMilwaukeeMilwaukee
NameBulldog Straight-Cut Aviation SnipsElectronic Filament Snip, 5-Inch9 in. Right-Cut Right Angle Aviation SnipsOffset Compound Tinner
Price
$2699
$2829
$3197
$3997
Ratings
(13)
(1)
(21)
(39)
Rolled Steel Gauge Cutting Capacity16222218
Snip TypeBulldog SnipTin SnipAviation SnipOffset Snip
Individual/SetIndividualIndividualIndividualSet
Blade Length (in.)0.875 in1 in2 in
Hand Tool TypeSnips/SidecuttersSnips/SidecuttersSnips/SidecuttersSnips/Sidecutters
Handle Length (in.)4.5645
View ProductView ProductView ProductView Product

Specifications

Dimensions

Blade Length (in.)0.875 inBlade Width (in.)0.5
Handle Length (in.)4.56Product Depth (in.)1
Product Length (in.)9.438Product Width (in.)2

Details

Blade MaterialSteelFeaturesNo Additional Features
Hand Tool TypeSnips/SidecuttersHandle MaterialPlastic
Individual/SetIndividualNumber of Pieces1
Product Weight (lb.)0.9Returnable90-Day
Rolled Steel Gauge Cutting Capacity16Snip TypeBulldog Snip
Tools Product TypeHand Tool

Warranty / Certifications

Manufacturer WarrantyPlease refer to the attached warranty document in the Product Overview section above under Info & Guides.

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 5
    out of 13 reviews
  • 100%recommend this product
Filter by:
Showing 1-10 of 13 reviews
Klein Bulldog snips 18 Gauge stainless steel, soft grips with the extra part on each side to keep...
Klein Bulldog snips 18 Gauge stainless steel, soft grips with the extra part on each side to keep hands from slipping down towards material getting cut, Strong compound swivel joints to make metal cutting effortless, sharp serrated cutting blades, locking latch to keep tool form opening, right yellow color handles make it easier to located in the tool box, smaller cutting too to get into tighter spaces, Yes I would recommend.
by
  • Recommended
1 found this review helpful
These are nice metal snips. I like the positive lock that can be engaged or disengaged with one h...
These are nice metal snips. I like the positive lock that can be engaged or disengaged with one hand. The "squeeze to open" feature works well - if they're locked closed just squeezing the handles a bit more unlocks them. They're rated for straight cuts in up to 16 gauge cold rolled steel or 18 gauge stainless steel. The maximum cut is about 3/4", but due to the extreme mechanical advantage, the handles are too wide apart (7" at the base) for even my large hands to use comfortably. I made the fastest progress taking smaller 1/2" bites while maintaining a comfortable grip. Cuts started easily and were straight and smooth, with no jagged edges. They have a hanging loop at the base of one of the handles. They're made in the USA.
by
  • Recommended
Excellent bulldogs! The mechanical advantage these generate with a nice short handle is impressiv...
Excellent bulldogs! The mechanical advantage these generate with a nice short handle is impressive. Ductwork cuts clean and smooth and accurate. They’re also great on wire—they were in my hand and I needed to trim some 14 gauge galvanized wire and it’s like I was cutting thick paper. Same with Romex and armored cable. Klein’s handles are comfortable, and I didn’t think I’d care, but I really do like the squeeze-to-open latch since I can hold my work piece with one hand and grab these out of my tool belt and open them easily. Great feature. Sharp, comfortable, and easy to use; there’s nothing not to like with these snips.
by
  • Recommended
1 found this review helpful
The Klein Journeyman Bulldog Straight cutting snips cut through sheet metal with ease. The blade...
The Klein Journeyman Bulldog Straight cutting snips cut through sheet metal with ease. The blades are really sharp and glide through the material. The finished cut edge is clean without any burrs. It is easy to make radius cuts as well as straight cuts. The handle grips are very comfortable and give you a good grip on the tool. These cutters are a great addition to my toolbox.
by
  • Recommended
2 found this review helpful
Klein Journeyman Buffdog straight cutting snips are made of forged steel cutting blades for super...
Klein Journeyman Buffdog straight cutting snips are made of forged steel cutting blades for superior strength and durability. Premium corrosion resistant handles with rubber coating that really helps you hold onto the snips as you cut straight or curved material with a cut length of 7/8 in. (22 mm). Made in the USA. Klein products manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship for the normal life of the product.
by
  • Recommended
1 found this review helpful
by
  • Verified Purchase
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
  • Verified Purchase
Excellently made AMERICAN TOOL
Excellently made AMERICAN TOOL
by
  • Verified Purchase
  • Recommended
These snippers are sharp, accurate and very easy to use. You can use them fir straight cutting, f...
These snippers are sharp, accurate and very easy to use. You can use them fir straight cutting, for right-hand cutting and for left-hand cutting. If you are planning on buying snips I would recommend this pair as a good all-around solution to cutting sheet metal. There are also snips made specifically for right and left hand cutting and even though these straights will work for anything, I plan to get the right-hand and a left-hand snips as well so as to complete the set.
by
  • Recommended
1 found this review helpful
A step up from my last snips, i really like this snipper. The handle is very comfortable and the ...
A step up from my last snips, i really like this snipper. The handle is very comfortable and the tool feels secure while using. The feature I like best is the return action spring as it is heavy duty and responsive. The blades can be separated for sharpening. The cut is straight and thorough. The tension between the blades can be adjusted by the securing nut. I can cut paper or furnace duct. Nice product.
by
  • Recommended
Showing 1-10 of 13 reviews