![]() | ![]() | ![]() | ![]() | |
Brand | Korky | Thetford | SLOAN | JAG PLUMBING PRODUCTS |
Name | QuietFILL Platinum Complete Universal Toilet Repair Kit | 31705 Water Module Assembly Kit Replacement Valve for Aqua-Magic V | FC100500K FLUSHMATE Cartridge | Ballcock Assembly for KOHLER Toilets |
Price | $2375 | $2947 | $3200 | $4423 |
Ratings | (1142) | (14) | (37) | (10) |
Plumbing Part Type | Toilet Flush & Fill Valve | Toilet Flush & Fill Valve | Toilet Flush & Fill Valve | Toilet Kit |
Application | Toilet | Toilet | Toilet | Toilet |
Material | Plastic | Plastic | Plastic | Plastic |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Korky | Thetford | SLOAN | JAG PLUMBING PRODUCTS |
Name | QuietFILL Platinum Complete Universal Toilet Repair Kit | 31705 Water Module Assembly Kit Replacement Valve for Aqua-Magic V | FC100500K FLUSHMATE Cartridge | Ballcock Assembly for KOHLER Toilets |
Price | $2375 | $2947 | $3200 | $4423 |
Ratings | (1142) | (14) | (37) | (10) |
Plumbing Part Type | ||||
Application | ||||
Material | ||||
View Product | View Product | View Product | View Product |
Yes. You will want to remove the tank so you have all new gaskets in place. It's not difficult.
I'd like to know the same question. Would have been nice to replace the older handle.
Sounds like the over flow is draining water into the bowl. Raise the flow tube above the water level or adjust the main valve to shut off sooner.
The tank to bowl bolts are stainless steel. Stainless will eventually rust over time, but my guess is that you will have to replace other parts of the toilet (or the whole toilet itself) before this becomes a problem.
Forgot to add... if you have reservations on tightening, call a plumber for help.
It should unless you have an unusual tank. The Korky has adjustable fill height valve. Relatively easy to install and works well. I would buy again.
I installed this on a Koehler toilet, and the three bolts worked. However, there was one problem with mine. I used the red base seal. I discarded the triangle gasket because it was worn. . On my Kohler toilet, the tank to base seal was not complete, so it leaked every time I flushed it. I added a extra gasket around the interface, and now it works fine. No other problems. Since the triangle gasket is on the tank side, I am not sure that keeping it would have solved this problem.
Same problem here too,this is 2inch,I'm thinking 3inch is needed
No, the flush valve size on this kit is 2”.
Yes the water level is adjustable. You mark where the water level is before removing the old parts. After the new pars are installed you flush the toilet and the instructions tell you how to adjust the level up or down to the level you need. Really simple to do, you just twist and slide the tube either up or down.