SmartCode 909 Venetian Bronze Single Cylinder Electronic Deadbolt Featuring SmartKey Security and Tustin Passage Lever

The SmartCode 909 is a stand-alone electronic lock, which only works by using the keypad or physical key. For a Kwikset lock that integrates with Amazon Alexa, please see the Halo Wi-Fi lock linked below. https://www.homedepot.com/p/Kwikset-HALO-Satin-Nickel-Keypad-Wi-Fi-Electronic-Single-Cylinder-Smart-Lock-Deadbolt-featuring-SmartKey-Security-938WIFIKYPD15SM/311532380

Yes, it would work on the door pictured. Of course like any door with glass or glass sidelights they will not be as secure as a solid door would be.

The Smartcode 909 can be installed on a door where the interior of the lock is enclosed and protected from the outside elements, while the keypad can face the exterior. The SmartCode 909 is not a weatherproof lock and cannot be installed on an outside gate or door with no interior covering or protection. If the lock is fully exposed on both sides, the lock's warranty will be void. To fix what you're experiencing, here are some steps to follow: Replace the batteries with a fresh set of name-brand alkaline batteries, perform the factory reset, and the manual handing process to recalibrate the latch. Also to ensure the lock is not jamming, check your door alignment and that the jamb hole is at least one inch deep and clean for the latch to extend fully.

To reset a user code on the SmartCode 909, you can either override it with a new code or perform a factory reset on the lock, which will delete all the codes. Please click on the following link for programming instructions. https://images.homedepot-static.com/catalog/pdfImages/32/32453ed8-eee7-4d49-ba39-aeb48d529a7b.pdf

The SmartCode 909 fits doors with a borehole diameter of 1-1/2” or 2-1/8" and a thickness between 1-3/8" to 2-1/4". Thick door kits are required for doors between 1-7/8” to 2-1/4” thick. The latch fits a backset of either 2-3/8" or 2-3/4".

No ... just on one side.

To reset a user code on the SmartCode 909, you can either override it with a new code or perform a factory reset on the lock, which will delete all the codes. Please click on the following link for programming instructions. https://images.homedepot-static.com/catalog/pdfImages/32/32453ed8-eee7-4d49-ba39-aeb48d529a7b.pdf

The SmartCode 909 is a stand-alone electronic lock, which only works by using the keypad or physical key. The SmartCode 910 Z-Wave lock is compatible with a Z-Wave hub, like SmartThings and can work through your smartphone. Please click on the following link for more details on the SmartCode 910. https://www.homedepot.com/p/Kwikset-Z-Wave-SmartCode-910-Satin-Nickel-Single-Cylinder-Electronic-Deadbolt-Featuring-SmartKey-Security-910TRLZW50015RC/305360458

To turn off the auto lock remove the interior cover. There are two set screws one on the left and one on the right. You will see four switches, the number 2 has to be depressed down to disabled auto lock, up is to engage. I hope this helps.

Yes, the model number for the battery holder is 83307.