#1 Home Improvement Retailer

Internet #202310622

Model #306 1X24

Store SKU #438260

1 in. x 24 in. Black Steel Schedule 40 Cut Pipe

Frequently Bought Together

+
+
Price:

Product Overview

STZ cut pipe is the way to go when selecting gas pipe for your residence. Our durable, schedule 40 black steel is hydrostatically tested and available in sizes to fit residential and light commercial gas and air applications. Our cut pipe has protective durable plastic end caps that help ensure the pipe ends remain undamaged in transport.
  • Not for use with potable drinking water
  • Rated at maximum 226 psi at 400°F
  • Steel construction
  • Not for underground use
  • Cut pipe is shipped with plastic end caps to protect pipe threads
  • Made to ASTM A53 specifications
  • Use for above ground gas, LP and air applications
  • Always check your local plumbing and gas codes before starting any piping projects
  • Maximum flow rate of 111.7 gpm at 400 psi
  • Note: Product may vary by store.
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Actual inside diameter (in.)
1.049
Actual outside diameter (in.)
1.315
Nominal Inside Pipe Diameter (In.)
1"
Pipe Wall Thickness (In.)
0.133
Product Length (ft.)
2 ft

Details

Application
Air,Natural Gas,Propane,Structural Building - Furniture
Color Family
Black
Color/Finish
Black
Connectivity
Threaded
Material
Steel
Maximum Flow Rate (gallons per minute)
111.7
Maximum working pressure (psi)
226
Maximum Working Temperature (F)
400
Minimum working temperature (F)
-29
Pack Size
1
Pipe Features
No Additional Features
Pipe or Fitting Product Type
Pipe & Tubing
Product Weight (lb.)
3.1917
Returnable
90-Day

Warranty / Certifications

Certifications and Listings
No Certifications or Listings
Manufacturer Warranty
Limited Lifetime

Questions & Answers

24Questions16Answers

How heavy is it?

Asked by Ash April 13, 2021
1
Answer

1.275 pounds.

can store cut these pipes down. going to use as support for a shelf above a table

Asked by Doug July 28, 2020
2
Answers

Yes, the store can cut these to whatever length you require. Just ask one of the store associates to help you with all your hardware needs, whatever they may be. I personally had a pipe cut to use for a clamp on my woodworking project, worked like a charm.

Can these be primed and painted?

Asked by JoJo July 15, 2020
2
Answers

you need to clean the protective oil off of them, usually with soap and water, heavy one can need vinegar to clean them. then dry, and prime...

Are these threaded on both ends?

Asked by JoJo July 15, 2020
1
Answer

yes they are

How much weight can this pipe hold ?

Asked by Larios May 18, 2020
1
Answer

Depending on what brackets you use it vertices 65 lbs

Do multiple ones screw together. I am thinking of using them for pipe clamps and want to know if ...

Asked by Yort May 16, 2020
2
Answers

You may need connectors. Be advised when you get into multiple connectors, sealing tape, angles etc it may cost more than the pipe. Good luck!

what are he lengths you can get this steel pipe in

Asked by Gavin February 18, 2020
3
Answers

2,3,4,5,6,8,10 + inches

What lengths are 1/2 black steel sold in

Asked by Rob April 19, 2019
2
Answers

1" 2" on up through 2 '

How much per cut?

Asked by Anon April 12, 2019
1
Answer

0

What is the thread count. I have to cut a piece that I purchased, and was going to purchase a die...

Asked by Cripp1 January 8, 2019
1
Answer

NPT pipe thread only has one thread count for each size and only comes in 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10, and 12 inches. Pipe thread is a tapered thread not a continuous thread like a nut or bolt. The TPI(thread per inch) is 27 for 1/8", 18 for 1/4" and 3/8", 14 for 1/2" and 3/4", 11-1/2 for 1" to 2", and 8 for 2-1/2" to 12". Home Depot offers a service that cuts and threads pipe for you.

1 in. x 24 in. Black Steel Schedule 40 Cut Pipe - page 2

Customer Reviews

  • 4.7
    out of 268 reviews
  • 96% recommend this product
Filter by:
Showing 1-10 of 268 reviews
Used these pipes for pipe clamps & bench vise....
Used these pipes for pipe clamps & bench vise.
by HomeDepotCustomer
1 person found this helpful
When pre-cut lengths are close to the size needed for a schedule 40 steel pipe replacement, this ...
When pre-cut lengths are close to the size needed for a schedule 40 steel pipe replacement, this was quick and easy to use.
by RvRemodel
Purchased these with a 1 in. x 48 in. pipe...
Purchased these with a 1 in. x 48 in. pipe along with a couple flanges and 90 degree elbows to build a ceiling mounted pull-up bar. Mounted the flanges to a 2 in. x 6 in. with 1/4 in. x 1 1/2 in. lag screws and the 2x6 to the ceiling with 1/4 in. x 4 in. lag screws. Worked out well!
by Dave
2 people found this helpful
Good product, just use paint thinner to remove stickers/oily coating
Good product, just use paint thinner to remove stickers/oily coating
by CJ
1 person found this helpful
Got this pipe to use for my pipe clamps. They hold a lot better than the standard clamps and are...
Got this pipe to use for my pipe clamps. They hold a lot better than the standard clamps and are much stronger. I highly advise you to use pipe clamps instead of other large clamps that are lighter and bend easily.
by Eric
1 person found this helpful
Really like ordering ahead and picking up at store. Great...
Really like ordering ahead and picking up at store. Great service!
by Gman66
bought this item to fabricate a handle for my 3...
bought this item to fabricate a handle for my 3 ton jack. it works!
by Jack
Yup, it's a piece of pipe....
Yup, it's a piece of pipe.
by mhardy6647
very solid, threading at ends is well cut. works very good in the construction i made.
very solid, threading at ends is well cut. works very good in the construction i made.
by breakerbar
Worked great. Easy pickup. Competitive pricing....
Worked great. Easy pickup. Competitive pricing.
by Gman66
Showing 1-10 of 268 reviews