
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
NeoPond Sealant is a Coating that is easily brushed on and cures into a Waterproof Membrane. It can be used in many applications where you need to create a watertight seal. Apply when the temperature is above 10C50F including overnight. Apply to a clean, dry surface, free of anything that would hinder adhesion. Typically cures within 3-5 days after your last coat. Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forecasted within 24 hrs. Not meant as a constant walking surface. Coverage - Flat/Ponding Surface - 1-Gal per 40 sq. ft. (3.7 sq/m). It should require around 3-4 heavy coats to achieve a 30 mil. (0.75 mm) (DFT) membrane. 200 sq. ft. per 5G pail. Apply the next coat when dry to touch and nothing is wet underneath. Tacky is ok. Generally 4-6 hrs between heavy coats. Amounts vary depending on surface roughness. Use all material up to achieve a long lasting membrane. Avoid hot, direct, intense Sunlight during application. Remove Painters Tape while still wet. See manufacturer for specific applications, coverage, tips and video. Clean Up - Use soap and water or mineral oil to clean skin. If you need to return anything, contact us to initiate a return. We ask the material be unopened, in new condition and you ship the product back to us within 90 days. If you have any questions on your project, please contact us.
Container Size | 5 Gallon |
|---|---|
Coverage Area (sq. ft.) | 200 sq ft |
Application | Pond Paint |
|---|---|
Application Method | Brush, Roller |
Base Material | Water Based |
Color Family | Black |
Color/Finish | Black |
Dry To Touch Time (hh:mm) | 04:00 |
Epoxy Type | 1 Part Epoxy |
Interior/Exterior | Exterior, Interior |
Kit | No |
Maximum hydrostatic pressure (lb.) | 0 |
Maximum Optimal Temperature (F) | 85 |
Minimum Optimal Temperature (F) | 50 |
Paint/Stain Clean Up | Soap & Water |
Paint/Stain Features | Waterproof |
Recommended Number of Coats | 3 |
Returnable | 90-Day |
Sheen | Satin |
Stain & Sealer In One | No |
Surface Location | Pond |
Surface Material Use | Concrete |
Time before recoating (hours) | 6 |
Transparency | Solid |
Vertical/Horizontal | Vertical / Horizontal |
Water Compatibility | Fresh Water |
Manufacturer Warranty | Reach out to Manufacturer for more details |
|---|
Hey Justin, To be honest we are not sure if we will bond to that product as we have not specifically tested for it's use. Just to be sure, I would recommend a small test on a scrap piece to confirm adhesion before full application. For more detailed information, Application Guidelines can be found on the Home Depot Product Page. To access it, go to the Product Details section and click Installation Guide. Have a great day! Liquid Rubber Product & Application Support
Hey Donovan, We don't recommend thinning our products as it may affect the performance of the material. Our Neopond can be sprayed with a heavy duty commercial model paint sprayer but most customers don't have access to that type of equipment so they use rollers and brushes. Have a great day! Liquid Rubber Product & Application Support
Hey Tomo, Yes we highly recommend using our Liquid Rubber Multipurpose Primer with any cement or concrete application. It is a clear primer designed to act as a bonding agent and prevent blistering. For more detailed information, Application Guidelines can be found on the Home Depot Product Page. To access it, go to the Product Details section and click Installation Guide. By following the Application Guideline, you’ll be sure to have a successful project. If you have any questions along the way, please let us know. Liquid Rubber Product & Application Support
Viewing 1-3 of 3
4.6 out of 5