Concrebond is a concrete bonding adhesive for interior or exterior plastering or plastering mix. This thick homopolymer emulsion is used to bond new to old concrete, in walls and roof ceilings plaster without a laborious scarification process. It will add resiliency and toughness when used as an additive for applications in cement to cement, cement to wood, plaster, stucco, tile and plaster to plaster.
Strong adhesion to the surface where it is applied
Low VOC, volatile organic compounds (10 g)
Designed for spray, brush and roller application
Adheres to fresh concrete or mortar mixtures
Unaffected by the alkalinity of the surface
Design with Re-Wettable technology for better application
Design for mixtures of cement or mortar for concrete surfaces, cement, wood and others
Why did it go from a 5 gallon bucket to a 3.5 gal for the same price???
Response from Lanco Product ExpertMar 22, 2021
Hi Kenny, the Concrebond Blue Rewettable Bonding Adhesive had a formula upgrade where it exceeds all construction codes, and it dries faster. Feel free to contact Lanco's technical support team at 786-495-5944.
Dalton SS-1H asphalt binder is an anionicDalton SS-1H asphalt binder is an anionic emulsion designed for use as a tack coat for patching, paving, overlays and coating blacktop. SS-1H promotes adhesion to blacktop (bituminous concrete). It can be applied via spray, brush or squeegee and dilution is not necessary. Most all sprayers will work. SS1H Tack Coat is thin and has an approximate density of 8.2 lbs per gallon. There is no aggregate in the material. The material will not clean up with water so a solvent will need to be used. Therefore the sprayer system must be able to withstand solvents to clean up.See Full Product Description