|Amperage (A)||15 A||Color Family||White|
|Compatible Bulb Type||CFL, Halogen, Incandescent, LED||Device Style Type||Light Switch w/o Wall Plate|
|Durability||Not Applicable||Electrical Features||No Additional Features|
|Finish Type||Gloss||Function Type||3-Way|
|Function Type||On-Off||Included||No Additional Items Included|
|Mounting Type||In-Wall||Number of Poles||3|
|Number of Switches||One||Package Quantity||10|
|Switch Depth (in.)||1.3 in||Switch Height (in.)||4.2 in|
|Switch Operation||Not Applicable||Switch Style||Rocker|
|Switch Type||Maintained||Switch Width (in.)||1.78 in|
|Voltage||120 volt, 277 volt||Voltage (V)||277 V|
|Wattage (W)||0 W|
|Certifications and Listings||UL Listed||Manufacturer Warranty||10-Year Limited|
A: Hi If there is 3 actually switch locations that would require (2) 3WAY switches like the one you are asking about and (1) 4WAY Switch : Please note to install the switch exactly the way it was before ,take a picture, or mark it with some tape it will save you in the long run .
A: No as you have what is referred to as a 4 way switch. For that configuration you'll need two 3-way switches and one 4-way switch. If you've never wired one of those up it may be to your advantage to get someone in who has done that before.
A: You will need 2 of these. And a 4way. If you have 3 switches for 1 light. You need two 3ways and one 4way.
A: For 3 switches, the one in the middle of the circuit needs to be a 4-way.
A: You need 4 way switch for that. 3 Way is not going to work.
A: The standard setup is to use two of those 3-way switches and a 4-way switch ex. model # 5604
A: Special order or sometimes the number is changed .. look for leviton decora switch and it will pop up
A: Refers to the commercial specification grade of the device in regard to the architectural Decora style and that the operation of the switch is quite (does not make a clicking noise when switch on/off). In addition to being self-grounding device yoke with both side and back wiring termination for the wiring to the device.