Internet #301420100

Model #ODS0D-IDG

Decora Commercial Grade Passive Infrared Single-Pole Dual Relay 2100 sq. ft. 180-Degree Occupancy Sensor, Gray

(1)
Questions & Answers (4)
  • Provides warning before shutting lights off
  • Responds to changes in ambient light
  • Works with fluorescent, incandescent and low-level lighting loads
  • See More Details

Product Overview

The Leviton Dual Relay Decora Wall Switch Occupancy Sensor Gray provides automatic lighting control for energy savings and convenience in a variety of commercial applications. The ODS0D-IDT features automatic switching for two separate banks of fluorescent, incandescent or low voltage lighting from a single unit, Convenient dual pushbuttons provide manual ON/OFF light switching of each load at any time, Conference, Class and Viewing Modes, Self-adjusting delayed OFF time interval compensates for real-time occupancy patterns, preventing unnecessary ON/OFF switching, Elegant Decora styling complements any interior; uses Decora wall plates and coordinates with Leviton’s popular line of Decora wiring devices and a Segmented Fresnel lens provides optimum sensitivity and performance. Note: Wall Switches and Occupancy Sensors Do Not come with wall plates unless otherwise specified.
  • Controls two separate lighting loads from a single unit
  • Features new self-adjusting occupancy sensor technology with automatic "walk-through" sensing
  • Choice of "conference room" or "class room" modes for maximum performance in a variety of installations
  • Convenient dual push-buttons provide manual on/off light switching of each load at any time
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Motion Sensors

Multi-Technology Wall Switch Motion Sensor with, Gray
current product
Decora Commercial Grade Passive Infrared Single-Pole Dual Relay 2100 sq. ft. 180-Degree Occupancy Sensor, Gray
Decora Dual-Relay Passive Infrared Wall Switch Occupancy Sensor, IvoryMaestro Dual-Tech Motion Sensor switch, 6-Amp, Single-Pole, Gray
BrandLevitonLevitonLevitonLutron
NameMulti-Technology Wall Switch Motion Sensor with, GrayDecora Commercial Grade Passive Infrared Single-Pole Dual Relay 2100 sq. ft. 180-Degree Occupancy Sensor, GrayDecora Dual-Relay Passive Infrared Wall Switch Occupancy Sensor, IvoryMaestro Dual-Tech Motion Sensor switch, 6-Amp, Single-Pole, Gray
Price
$5687
$8485
$9092
$9595
Ratings
(3)
(1)
(1)
(3)
Electrical FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional FeaturesProgrammable
Wattage (watts)800800800720
Mounting TypeIn-WallIn-WallIn-WallIn-Wall
Indoor/OutdoorIndoorIndoorIndoorIndoor
Motion Sense TypeOccupancyOccupancyOccupancyOccupancy
Field of View180 Degrees180 Degrees180 Degrees180 Degrees
Voltage120 volt120 volt,277 volt120 volt120 volt
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
1.35
Product Height (in.)
4.06
Product Width (in.)
1.75

Details

Amperage (amps)
0 A
Color Family
Gray
Color/Finish
Gray
Commercial/Residential
Commercial
Compatible Bulb Type
Incandescent
Coverage Area (sq. ft.)
2100
Electrical Features
No Additional Features
Electrical Product Type
Motion Sensor
Field of View
180 Degrees
Indoor/Outdoor
Indoor
Maximum Distance (ft.)
2100
Motion Sense Type
Occupancy
Mounting Type
In-Wall
Pack Size
1
Rating
General Purpose
Returnable
180-Day
Voltage
120 volt,277 volt
Wall Plate Included
No
Wattage (watts)
800

Warranty / Certifications

Certifications and Listings
UL Listed,cUL Listed
Manufacturer Warranty
5-Year Limited

Questions & Answers

4Questions4Answers

“If you don’t wire a secondary load, do you just cap the two red wires?”

Asked by Mmmmk December 11, 2018
1
Answer

Hi ,Thank you for choosing Leviton, Yes capping the two red wires is correct.

Can this be wired to support only one load (set of lights)? If so, how should the secondary load wires be handled when wiring the switch?

Asked by Kappa December 10, 2018
1
Answer

Hi , Thank you for choosing Leviton. Yes, you would not use the secondary load, leave that terminal unused and cover all terminal screws with electrical tape.

Is this a dual pole switch? I am looking for a switch that will control two individual loads (a e...

Asked by Reid August 2, 2018
1
Answer

Hi , Thank you for choosing Leviton. Yes, this switch will work for that application.

DO THESE WORK WITH LED LIGHTS

Asked by SHAMUS March 30, 2018
1
Answer

Yes, they do.

Customer Reviews

  • 4
    out of 1 reviews
  • 0% recommend this product
5star-icon0
4star-icon1
3star-icon0
2star-icon0
1star-icon0
Filter by:
Showing 1-1 of 1 reviews
Switch works great. The only negative is the high price....
Switch works great. The only negative is the high price.
by MikeFUMC
Showing 1-1 of 1 reviews