Liberty Modern Wood 3 in. (76 mm) Matte Black and Rustic Pine Cabinet Drawer Bar Pull

Good fit. Look good. Good size

Looks just as pictured!

Easy to install; nice wood texture and feel.

SEEDS PROGRAM Dan Lyle – CraftyFxDan – December 3, 20118 Liberty Hardware – Modern wood pull – Flat black iron and rustic pine P39344C – FBP – CP – 3 inch review: First Impressions: Aesthetically very pleasing. I really like the rustic yet modern look of this pull. Upon closer inspection: Prior to actually touching these pulls I assumed that they might be constructed of plastic and faux wood. NOT SO! They are made from black iron and real pine wood dowels. Very solid construction. Like most DIYers I have used Liberty Hardware many times in the past and have always been pleased with their products. On one of the 10 pulls I received the metal piece was loose on the wood dowel. There is an approximately 3/32 inch set screw that secures the metal to the wood dowel. Using the appropriate sized Allen wrench I was easily able to secure the metal to the dowel (see attached photo). I really like the use of a set screw instead of just gluing or pressing into place. These pulls will last for years and to restore the finish or make changes, the set screw configuration makes it a breeze. Liberty thoughtfully provides two sizes of screws to accommodate different thicknesses. (2) 1 inch X 5/32 inch – 32 and (2)1 5/8 inch X 5/32 inch -32. They are tooled for use with either a Phillips head or slotted screwdriver. How I am using these pulls: I have an older solid pinewood 5-drawer dresser that needs restoration. I am using these for the drawer pulls. The original pulls on this dresser were wider and to avoid having to fill the existing holes to keep them from showing I needed 4 ½ inch backing plates. I could not locate anything on line that was appropriate so I decided to make my own. I had some leftover 2 inch wide X 3/32 inch thick plastic slats from a window blinds project. I cut out my backing plates from this material, hammered them with a small hammer to get a dimpled looking surface and then painted them flat black. They look just like forged iron. This project will take time to finish but I have attached a photo of one of the completed drawers. I plan to send photos of the dresser when completed. Might be awhile. My workshop is not climate controlled and it gets very cold and wet here. The varnishing will need to wait until warmer drier weather. Results and conclusions: I am really impressed with the design and construction of these pulls. I could not be more pleased with the way they look on the dresser drawer. I am hoping they offer some other lengths in the future. I want to use these when I renew my kitchen cabinets and would like a 6 to 8 inch length for the cupboard doors. The 3 inch length is fine for drawers. I highly recommend these for anyone looking for a quality pull in a very attractive modern rustic design. CraftyFXDan

A pull made from metal and wood. This pull from Liberty is perfect for country and farmhouse décor. This pull looks great against my homemade entertainment center and with these pulls I plan on making some cabinets and using these pulls for both the drawers and doors. This pull comes with 2 sets of screws, one is 7/8-inch-long and the other is 1-5/8 inch long. The width of the handle is just over 6" wide and the handle will stick out about 1-1/4 inch out after installation. Handles are well made and the come in different widths.

This rustic handle is not as thick as I expected. I intended to use it as bi-fold door handle. Regardless, it's form and function is still worth five stars.

I like the handles, but color was more orange than pictured. Unfortunately, I returned.

Exactly as pictured, rustic yet elegant!