LS100DX 4-Person 20-Jet 110-Volt Plug and Play Spa with Waterfall

It doesn’t have a heater. It heats the water by friction from the water running through the pump. For us, after delivery, the water temperature increased about 4 degrees per hour in 33 degree weather. It took 20 hours for the water to heat to our set temperature. It only kicks on a few times a day to filter the water and maintain the set water temperature.

Hello! We recommend removing and thoroughly rinsing our filter every two weeks with a garden hose, making sure to get in-between the folds. The filter cartridge should be replaced every 6 to 8 months depending on use. --Happy soaking!

Hi, Jacquie! The LS100DX cannot be converted to a 220V configuration. The plug and play technology for this model only requires a standard outlet to get up and running. Feel free to browse our 220v models, such as the LS550 Plus, LS600DX, and more. --Happy soaking!

Not sure of rating - specs call for a dedicated 15 amp circuit. Power cord comes with integrated GFCI protection. I think it is about the same as a space heater, about 1500-1800 watts. In winter it seems to turn on 4-5 times a day for about 30-45 minutes to maintain the 103 temp we usually have it set at.

Mtching steos are an add-on purchase - lightweight, same material the spa is made frim. Nice match and not expensive if I remember correctly

Hi, Michael! Your new spa will need a level and solid foundation to support the tub and its water weight. Other than that, no special surface or mounting is required. -- Happy soaking!

No idea what any final discount might or might not be. But "installing" the spa is "easy". It gets drop shipped to your driveway, push it (preferably on a dolly) to wherever you want it. Un-crate it and while still on its side pull out the 15 foot power cord tucked into the underneath protective cover - sometimes it get kinda stuck so you might have to yank on it a couple of times to get it loose. Then lay it down, fill it with water and plug it in. Done. Oh? Did they mention you MUST have a dedicated 15-Amp outlet with 15 feet of where you want it plugged in? If you don't have one, get that installed first. It is just a regular 15-Amp outlet so no big deal. Local codes generally require a GFCI outlet outdoors BUT the power cord comes with a built-in GFCI connector and you are NOT supposed to plug a GFCI into a GFCI. The cord covers BOTH outlets so it pretty well guarantees ONLY the spa will use that circuit. Enjoy. Had mine 3 years no probs once I got the the circuit and outlet installed.

Just pull harder! I had sane experience when mine first arrived - thought I got cheated with only a three foot cord! Power cord seems to cling to underside protective cover and base - maybe from sitting in storage before shipment? I just pulled and wiggled and it broke loose and easily pulled out to full length.

Hi Justin, per our vendor, this Lifesmart Bermuda DLX (LS100DX) 20-Jet, 4-Person Spa does not have an estimated arrival for Homedepot.com at this point. However, if you would like to be notified with updates on the status of this item, you can enter your email address into the field provided on the product's page. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

Hello! Your new spa needs a full, solid foundation. The area your spa sits on must be able to support the spa, the water, and those who use it. A concrete foundation or reinforced deck are most effective. If the foundation is inadequate, it may shift or settle after the spa is in place, causing stress to the shell or components. You can check out the pre-delivery guide for more information here: https://images.homedepot-static.com/catalog/pdfImages/f4/f40a8b0e-42f6-4318-8530-644ce839e313.pdf - Happy soaking!