No, The Loctite Clear Silicone is 100% silicone and will not accept paint.
To replace a rubber gasket on a carpet cleaner may not be a suitable fix. It might however be possible to make a repair to the rubber gasket with the Loctite Clear Silicone adhesive, but your success would depend upon the rubber gasket composition. Not all rubber gaskets are of same composition. It is important to keep in mind that using this product may not compatible with the current rubber seal and may make the situation more difficult to repair afterwards. We would recommend you contact the carpet cleaner manufacturer or a local appliance store for further assistance. The best advice in this situation would be to replace the gasket all together
No, this is not a neutral cure silicone.
There is not enough information provided to give a definitive answer but in most cases the application more than likely would not be successful
The Loctite Clear Silicone is flexible not hard when cured
The Loctite Clear Waterproof Silicone Adhesive can be used to seal the drain but not necessarily be the sole source of attachment. We recommend you contact the manufacturer of the fiberglass shower base or the plastic shower drain manufacturer for specific instructions
We would not recommend using this product for the repair described. If this is inside the tank an alternative product as a better choice would be the Loctite PL Maine fast cure Adhesive sealant or the Loctite Epoxy Marine
Given the circumstances about the issue described this might be possible but not a good idea keeping in mind that once you have taken this step and the issue is not resolved you might make the situation worse by using the silicone and future repair may be impacted. Suggest replacing the washer parts first and if that does not resolve the issue the problem may not be the screw and washer but something else.
The maximum long term service temperature of the Loctite Clear Silicone product is -76°F (-60°C) to 392°F (200°C) when fully cured. This product is not flammable
The Loctite Clear Silicone adhesive is waterproof and should hold up under raining conditions.