What does the label say? The directions and proper usage instructions are printed in at least two languages.
Thank you for the question. The Loctite Naval Jelly Rust Dissolver is not classified as environment safe. This product contains Phosphoric acid which has moderate acute and chronic toxicity to aquatic life in waters of low alkalinity. Large quantities should not be allowed to spill or enter the water system. Loctite does not recommend using or putting this product in septic systems. Product would need to be thoroughly neutralized with fresh clean water beforehand. Please refer to the products material Safety Data Sheet
Believe it or not, kerosene works on chromed steel when the rust is light. I use it all the time on my motorcycle wheels and it never fails me.
Remueve el óxido rápidamente
No, this product should not be used on rubber. The Loctite Naval Jelly Rust Dissolver can only be used on ferrous metals such as steel and iron. This product will cause damage to non-ferrous metals which may not be reversible. Non-ferrous metals include aluminum, brass, copper, nickel, tin, lead, and zinc, as well as precious metals like gold and silver.
No, this cannot be used.
Yes, The Loctite Naval Jelly Rust Dissolver can cause damage to metals that are “non-ferrous” such as copper which is used in electrical conduction.
There is no specific coverage rate for this product? There is no set coverage rate available for this product. Coverage will depend solely on how much rust needs to be removed from a given item or surface area.
Yes, The Loctite Naval Jelly Rust Dissolver will cause damage to stainless or stainless steel surfaces. Do not use this product on aluminum, chrome, stainless steel, cement, fiberglass, marble, plastics or painted surfaces.
The Loctite® Naval Jelly® Rust Dissolver removes rust from metal surfaces such as iron, steel and other ferrous metals. Do not use on aluminum, chrome, stainless steel, cement, fiberglass, marble, plastics or painted surfaces. It is not suitable for long term protection of surfaces. Product is not a rust preventer and should be protected with a clear coating or primed & painted within 24 hours of application. It is not compatible with latex topcoats.