Loctite PL 550 Tub Surround Adhesive is specially formulated to bond most plastic bathroom and shower enclosures. It is unaffected by moisture, steam, water, heat or cold when fully cured. Loctite PL 550 Tub Surround Adhesive will not harm or burn-through tub kit materials if used as directed. For use with at least one porous surface for best results. Low VOC formulation meets stringent State and Federal requirements.
Will not etch or burn through tub surround damaging the unit
High grab formula minimizes the slippage of panels to vertical surfaces
25 minutes of re-positioning time allows for correction of misaligned material
Gap filling properties help to bond irregular surfaces
Uncured adhesive cleans up easily with soap and water
Unaffected by moisture, steam, water, heat or cold when fully cured
Stuff works great, I don't know how anyone would even know, or why they would care, if it wasn't ...
Stuff works great, I don't know how anyone would even know, or why they would care, if it wasn't dry for a week. It grabs and holds immediately. Use a "J" roller to bond it good against the wall. Does need to come in a larger container or better distribution system like a quart or so size squeeze bag with a nozzle that has the correct "V" notch. I used 17 tubes to install my surround, cost almost as much as the surround.
1 found this review helpful
Dec 9, 2016
I ran out of tub surround adhesive and quick ran to Home Depot for more. I picked up the PL 550 a...
I ran out of tub surround adhesive and quick ran to Home Depot for more. I picked up the PL 550 and while it did eventually work out fine, it took AT LEAST 4 DAYS TO DRY or longer where the other product only took one day. I made a note to never buy this again because the dry time is ridiculous. Yes I know how to use it properly too.