Thank you for the question. The maximum temperature rating is 158°F (70°C) after full cure. The product is not classified as UV resistant.
On my end, it did not.
Thank you for the question. Using the Loctite Power Grab Crystal Clear for the application described is possible depending on the nature and size of the project. This is not a silicone. If your project is large and possibly subjected to a vertical load this product may not be well suited. Furthermore, the cure time will be increased significantly due to porosity of the materials. Because there are no specific details provided, you will need to make your own determination in this situation as to suitable fitness and acceptable results for this particular application so it is recommended that you test the application first before proceeding with the project. If you need help, please reach out to our technical team at 1-800-624-7767 for assistance.
Side-cutter pliers or a wire cutter work well. They will make an oval tip which can be rounded out with a nail or piece of dowel.
I just used it to bond wood with wood. it will set fast but will cure after approximately 2 to 3 hours after that forget you can apart the two pieces from each other. It works for everything. it is written on it works on granite, tile. ceramic, porcelain, concrete and masonry. so, it will work.
Joker, great question. This will indeed require 24 hours of drying time, so you may need to hold the PVC in place somehow with take, tack, etc. but it will definitely do the trick. This stuff is crazy sticky. Good luck with your project, Keith
Yes, it will work with everything.
Thank you for taking time to share your feedback. The Loctite Power Grab Ultimate Clear is very gooey or sticky if you are touching it. Because glass is a very smooth non-porous surface it will require temporary bracing of blocking until the adhesive is cured. The successful use of the product does depend upon the nature of the project. If you still need help plea reach out to our Technical team at 1-800-624-7767 for assistance.
Thank you for the question. The Loctite Power Grab Ultimate Crystal Clear can bond to some plastics but not all. This product would not be the a good choice depending on the nature or scope of the intended project. Perhaps if we know more about the project we could provide a more suitable answer.
Thank you for the question. The Power Grab Ultimate Crystal Clear will bond to glass and will bond to metal. However bonding metal to glass together can be tricky since both substrates are non-porous. Because there are not enough details about the intended project makes it difficult to provide a good answer. The successful use will depend upon the nature and scope of the project. Therefore, in situations like this a good rule of thumb would be if your project is larger than your hand and the bond could be subjected to stress or a vertical load then this product may not be suitable without other means of a support system. It is recommended that you first test the intended application to determine suitable and acceptable results prior to the start of the project.