Internet #206145908

Model #DVSTV-WH

Diva Dimmer for 0-10V LED/Fluorescent Fixtures, 8 Amp, Single-Pole or 3-Way, White

  • Dimmer for 0-10V LED/Fluourescent fixtures; 8A max
  • Installs easily; no neutral wire or power pack required
  • Features low-end trim adjustment
  • See More Details

Frequently Bought Together

+
+
Price:
$7500

Product Overview

This dimmer is a simple solution is designed to match existing design style switches and accessories. Easily turn the lights on and off with a paddle switch, and use the slide control to adjust the lights to the perfect level. The new Diva 0 to 10-Volt dimmer is a 0-10 VDC dimmer with 3-way functionality for 3rd party 0 to 10-Volt fixtures (LED and fluorescent), no separate power pack required. Coordinating wall plate sold separately.
  • For use in controlling 0 to 10-Volt LED drivers and/or fluorescent ballasts
  • Easily replaces existing switch and installs in as little as 15 minutes (no neutral wire required)
  • Large paddle switch with a captive linear-slide control for a standard designer-opening wall plate
  • Can be used in single pole or 3-way applications
  • No neutral wire or power pack required
  • Coordinating Claro wall plate sold separately
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Dimmers

Diva LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, White (3-Pack)
current product
Diva Dimmer for 0-10V LED/Fluorescent Fixtures, 8 Amp, Single-Pole or 3-Way, White
Skylark 1,000-Watt 3-Way Preset Dimmer, WhiteDiva LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, White (6-Pack)
BrandLutronLutronLutronLutron
NameDiva LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, White (3-Pack)Diva Dimmer for 0-10V LED/Fluorescent Fixtures, 8 Amp, Single-Pole or 3-Way, WhiteSkylark 1,000-Watt 3-Way Preset Dimmer, WhiteDiva LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, White (6-Pack)
Price
$7491
$7500
$8330
$14900
Ratings
(644)
(37)
(3)
(644)
Electrical FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional FeaturesNo Additional Features
Wattage (watts)1509601000150
Compatible Bulb TypeCFL,Halogen,Incandescent,LEDLEDHalogen,IncandescentCFL,LED
Control TypeRockerSlideSlideRocker
Mounting TypeIn-WallIn-WallIn-WallIn-Wall
Voltage120 volt120 volt120 volt120 volt
Indoor/OutdoorIndoorIndoorIndoorIndoor
Amperage (amps)1.2588.31.25
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
2.5
Product Height (in.)
4.5
Product Width (in.)
2.5

Details

Amperage (amps)
8
Color Family
White
Color/Finish
White
Compatible Bulb Type
LED
Control Type
Slide
Electrical Features
No Additional Features
Electrical Product Type
Dimmer
Indoor/Outdoor
Indoor
Mounting Type
In-Wall
Pack Size
1
Rating
General Purpose
Returnable
180-Day
Voltage
120 volt
Wattage (watts)
960
Wired or Wireless
Wired

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
1 Year

Questions & Answers

11Questions14Answers

Can this be wired as a dimmer only with on/off switched elsewhere?

Asked by Spike June 18, 2020
1
Answer

The DVSTV switching capability cannot be bypassed. Lutron recommends installing the DVSTV to accomplish on/off/dimming functionality.

Just installed this Lutron Diva 0-10V dimmer switch. When turning the switch on, I can hear a rel...

Asked by MB March 25, 2020
1
Answer

Thank you for your inquiry. Please reach out to our Support Team at support@Lutron.com or by phone at 1 (844) 588-7661 for additional assistance.

Does this switch work with commercial electric flat panel troffer LED lights?

Asked by Al February 18, 2020
1
Answer

The DVSTV is a 0-10V dimmer rated for 8A of switching and 50 mA of dimming. You can reference additional information about the dimmer on the spec sheet here: http://www.lutron.com/TechnicalDocumentLibrary/369147.pdf. If the Commercial Electrica flat panel troffer LED utilizes a 0-10V dimming protocol, then the DVSTV would work.

Can i use this dimmer for ALED26Y-D10 with 0-10V dimming system? Moreover, my input voltage is 23...

Asked by Ravien January 4, 2020
1
Answer

The DVSTV is designed for 0-10V dimming, however the input voltage should be either 120V or 277V. Lutron would not recommend using this control for 230V applications.

what is the deration factor when the cooling fins need to be broken off

Asked by Lonnie September 19, 2018
1
Answer

Thank you for your inquiry. The DVSTV does not derate. It is rated for 8A regardless of how many heat sink fins are removed.

Would like to know if this dimmer is compatible with a Philips Advance Xitanium LED electronic driver?

Asked by Colin May 12, 2017
1
Answer

According to the spec sheet for that driver, it requires a 0-10v dimmer so yes, this dimmer would be compatible with that driver.

Can this dimmer also be used on a 277V circuit ?

Asked by Mike May 3, 2017
1
Answer

Yes, this product is rated to work in either a 120v or 277v application.

Will this switch work as a 3-way switch on fixtures that have low voltage wiring (purple, gray) s...

Asked by BigAl753 March 24, 2017
2
Answers

Yes, it can be the master. There is a 3rd wire for the remote-in

Can you run the 0-10 volt in the same conduit as 277 volts with out interference.

Asked by GB March 8, 2017
2
Answers

Yes, as long as your wire is 600V rated.

Re-asking the previous question: Can this control more than one fixture? I have two fixtures per switch, can it dim both?

Asked by Pearson101 May 30, 2016
3
Answers

It depends on the drivers in the lights, but typically a light driver with 0-10 dimmability can handle up to 250 lights chained together, even if on different circuits. The 0-10 is separate and powered by each driver. The slide dimmer is just a small variable resistor that decreases the voltage between 10 and 0 volts. If you touch the two dimming wires together (purple and gray) it will fully dim the light to 10%. So to reiterate, if you are certain that your fixtures have ballasts/drivers with 0-10 volt dimming then yes you can use this switch to dim all of them at once.

Diva Dimmer for 0-10V LED/Fluorescent Fixtures, 8 Amp, Single-Pole or 3-Way, White - page 2

Customer Reviews

  • 37 Customer Reviews
  • 4.4 out of 5 stars overall
93% of customers recommended.
Overall Ratings
5star-icon(24)
4star-icon(8)
3star-icon(2)
2star-icon(1)
1star-icon(2)
Sort By:
Love it made my gazebo lights awesome!...
Love it made my gazebo lights awesome!
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Was exactly what I needed...
Was exactly what I needed
Was this helpful?
0
0
As advertised and works great. The only reason I do...
As advertised and works great. The only reason I do not give it an excellent rating is in order to caution others that in most cases this will require 5 conductors between the dimmer and the fixture.1 - Switched line2 - Neutral3 - Ground4 - +0 -10 volt dimmer5 - -0 - 10 volt dimmer
Was this helpful?
0
0
Works great. Easy to install...
Works great. Easy to install
Was this helpful?
0
0
Doesn’t works the way I was expecting .The dinner does...
Doesn’t works the way I was expecting .The dinner does not turns the light all the way off ( may just half way!)very disappointing.never will be buying again!
Was this helpful?
0
0
Response from lutronApril 3, 2020
​​We're sorry to hear that your dimmer is not turning the lights completely off. Depending on the model dimmer you have, a switching relay may be required. We would like to hear more from you about your experience to see how we can help. Please reach out to our dedicated Customer Satisfaction team at: customersatisfaction@lutron.com, or call us at: 1-844-LUTRON1. We're here 24/7, so please call us any time.

Mike S. @Lutron Support lutron
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Works perfect!...
Works perfect!
Was this helpful?
0
0
It works fine, just a drag to run the extra...
It works fine, just a drag to run the extra control wiring to the entire bank of lights. Once finished it's great that the dimming is stable over the whole area.
Was this helpful?
0
0
Works well with shop light. However does not dim to zero.
Works well with shop light. However does not dim to zero.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers