Model # MSCL-OP153M-SW

Internet #204475517

Lutron Maestro C.L Dimmer and Motion Sensor, Single Pole and Multi-Location, Snow
0784276054805

Lutron

Maestro C.L Dimmer and Motion Sensor, Single Pole and Multi-Location, Snow

  • Auto on to a favorite dimmed level then auto off when you leave
  • Detects fine motion 2-3x's better than other sensors
  • Provides best dimming performance for LED bulbs
$4382 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Auto on to a favorite dimmed level then auto off when you leave
  • Detects fine motion 2-3x's better than other sensors
  • Provides best dimming performance for LED bulbs
Coordinating Claro wall plate and accessories sold separately. Let Lutron Maestro CFL/LED Occupancy Sensing Dimmers turn the lights on and off to your favorite level. It’s a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro Occupancy Sensing Dimmer and lights turn on when you enter the room, and then turn off automatically after you leave. The dimmer works just like a Lutron Maestro dimmer, gradually turning lights on and off, allowing your eyes to adjust to the new light level. Use the rocker to adjust the light level for any activity, or set the preset level to ensure lights always turn on to your desired light level. Equipped with ambient light detection, you can customize your sensing dimmer to detect daylight so lights don’t turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids’ rooms and never worry about lights being left on by mistake. Maestro Occupancy Sensing dimmers work with any bulb type, including dimmable CFL's and dimmable LED's. This occupancy sensing dimmer can also be easily programmed to function as a vacancy (manual-on) sensor.
  • Automatically turn lights on and off to favorite dimmed level
  • Provides the best dimming performance for LED bulbs (for list approved LED Bulbs, see "Technical Specifications" below)
  • For use with up to 150-Watts of dimmable LED and up to 600-Watts of incandescent and halogen bulbs
  • Programmable fade gradually turns lights on, allowing your eyes to adjust to the change in light, and gradually fade off, allowing time to exit a room before the lights turn off
  • Uses advanced XCT sensing technology, offering the most reliable on/off performance up to 30ft
  • Features prgrammable time-out of lights - 1, 5, 15, or 30 minutes
  • Installs in as little as 15 minutes
  • Includes (1) Maestro C.L Dimmer with Occupancy Sensor; coordinating Claro wallplate sold separately
  • Includes (1) Maestro C.L Dimmer with Occupancy Sensor; coordinating Claro wallplate sold separately



  • Click here for more information on Electronic Recycling Programs

Product Overview

  • Auto on to a favorite dimmed level then auto off when you leave
  • Detects fine motion 2-3x's better than other sensors
  • Provides best dimming performance for LED bulbs
Model #: MSCL-OP153M-SW
Internet #: 204475517

Coordinating Claro wall plate and accessories sold separately. Let Lutron Maestro CFL/LED Occupancy Sensing Dimmers turn the lights on and off to your favorite level. It’s a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro Occupancy Sensing Dimmer and lights turn on when you enter the room, and then turn off automatically after you leave. The dimmer works just like a Lutron Maestro dimmer, gradually turning lights on and off, allowing your eyes to adjust to the new light level. Use the rocker to adjust the light level for any activity, or set the preset level to ensure lights always turn on to your desired light level. Equipped with ambient light detection, you can customize your sensing dimmer to detect daylight so lights don’t turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids’ rooms and never worry about lights being left on by mistake. Maestro Occupancy Sensing dimmers work with any bulb type, including dimmable CFL's and dimmable LED's. This occupancy sensing dimmer can also be easily programmed to function as a vacancy (manual-on) sensor.

  • Automatically turn lights on and off to favorite dimmed level
  • Provides the best dimming performance for LED bulbs (for list approved LED Bulbs, see "Technical Specifications" below)
  • For use with up to 150-Watts of dimmable LED and up to 600-Watts of incandescent and halogen bulbs
  • Programmable fade gradually turns lights on, allowing your eyes to adjust to the change in light, and gradually fade off, allowing time to exit a room before the lights turn off
  • Uses advanced XCT sensing technology, offering the most reliable on/off performance up to 30ft
  • Features prgrammable time-out of lights - 1, 5, 15, or 30 minutes
  • Installs in as little as 15 minutes
  • Includes (1) Maestro C.L Dimmer with Occupancy Sensor; coordinating Claro wallplate sold separately
  • Includes (1) Maestro C.L Dimmer with Occupancy Sensor; coordinating Claro wallplate sold separately



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Price
$34.55 /each
$43.82 /each
$46.56 /each
$52.94 /each
Name Maestro Dual Voltage Vacancy Sensor switch, 6-Amp, Single-Pole, Turquoise Maestro C.L Dimmer and Motion Sensor, Single Pole and Multi-Location, Snow Maestro Dual Voltage Vacancy Sensor switch, 6-Amp, Single-Pole, Stone Maestro Dual Voltage Vacancy Sensor switch, 6-Amp, Single-Pole, Sienna
Brand Lutron Lutron Lutron Lutron
Ratings (1) (62) (1) (1)
Wattage (watts) 150 1.25 150 720
Range (ft.) 30 30 30 30
Motion Sensor Type Vacancy Occupancy Vacancy Vacancy
Electrical Features LED/CFL Compatible,Programmable LED/CFL Compatible,Programmable LED/CFL Compatible,Programmable LED/CFL Compatible,Programmable
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
1.75
Product Height (in.)
4.5
Product Width (in.)
2.2

Details

Amperage (amps)
1.25
Color Family
Multi
Color Family
Multi-Colored
Color/Finish
Snow
Electrical Features
LED/CFL Compatible,Programmable
Electrical Product Type
Motion Sensor
Field of View
180 Degrees
Motion Sensor Type
Occupancy
Pack Size
1
Range (ft.)
30
Returnable
90-Day
Voltage (volts)
120
Wattage (watts)
1.25

Warranty / Certifications

Certifications and Listings
1-UL Listed
Manufacturer Warranty
1 Year

Specifications

Dimensions

Product Depth (in.)
1.75
Product Height (in.)
4.5
Product Width (in.)
2.2

Details

Amperage (amps)
1.25
Color Family
Multi
Color Family
Multi-Colored
Color/Finish
Snow
Electrical Features
LED/CFL Compatible,Programmable
Electrical Product Type
Motion Sensor
Field of View
180 Degrees
Motion Sensor Type
Occupancy
Pack Size
1
Range (ft.)
30
Returnable
90-Day
Voltage (volts)
120
Wattage (watts)
1.25

Warranty / Certifications

Certifications and Listings
1-UL Listed
Manufacturer Warranty
1 Year

Questions & Answers

Is there a bypass/manual override mode to deactivate the motion sensor so it would act as a regular dimmer switch?

Asked by: Keen
The MSCL-OP153M can be programmed to work in vacancy mode which would require turning on the lights manually, however the timeout feature cannot be disabled.
Answered by: BrandAnswers
Date published: 2017-11-03

what is the companion 3 way occupancy sensor switch to use with MSCL-OP153MH? Thanks!

I have installed Lutron dimmer occupancy sensor MSCL-OP153MH, and I want to add companion sensor switch... what is the companion 3 way occupancy sensor switch to use with MSCL-OP153MH? Thanks!
Asked by: Anonymous
If you want sensors at two different spots on the same circuit, it cannot be done with this particular model. You can control it from other locations using the MA-R companion dimmer, or even wire it to a conventional switch for multi-location control, but no motion sensing. Lutron does make other models that will sense from multiple locations; you might want to call them for further guidance.
Answered by: haef
Date published: 2017-10-02

Will a cat turn on these lights?

Will a cat turn on these lights?
Asked by: alex
If an animal comes within the sensors range, it will detect occupancy and will trigger the lights to come on.
Answered by: BrandAnswers
Date published: 2017-10-10

How do I program the amount of time the light is on

The product information states that the amount of time the light will stay on is programmable. How is this done or what document describes the procedure to program it?
Asked by: Mike
Please see the following document for programming timeout on the MSCL-OP153M: http://www.lutron.com/TechnicalDocumentLibrary/048480a.pdf
Answered by: BrandAnswers
Date published: 2017-11-15
  • y_2017, m_11, d_20, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_, sid_204475517, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms
  • QUESTIONS, PRODUCT

Customer Reviews

Maestro C.L Dimmer and Motion Sensor, Single Pole and Multi-Location, Snow is rated 4.3 out of 5 by 62.
Rated 5 out of 5 by from Awesome switch for automating your lighting control AND having the dimming option included! Nice ... Awesome switch for automating your lighting control AND having the dimming option included! Nice that you can adjust the motion sensitivity and change it from an occupancy switch to a vacancy switch when the need arises. Also nice to be able to set it for sensing daylight to help save power when not needed. Super bonus for having this be able to work in single-pole OR 3-way. Only downfall is that they are not rated for use with CFL/LED bulbs but I found that they do work with the LED bulbs that I have installed in the fixture.
Date published: 2017-09-05
Rated 1 out of 5 by from The switch is very difficult to program. After three calls to the Lutron helpline, I am still not... The switch is very difficult to program. After three calls to the Lutron helpline, I am still not able to program the switch.
Date published: 2017-07-18
Rated 5 out of 5 by from The instructions to set features could be a little clearer but was easy to install and so far wor... The instructions to set features could be a little clearer but was easy to install and so far works very well.
Date published: 2017-08-06
Rated 5 out of 5 by from Lights on, lights off! Perfect in my laundry room, entry, and hallway! What more can I say?
Date published: 2017-07-18
Rated 5 out of 5 by from works perfect.....!!... works perfect.....!!
Date published: 2017-08-15
Rated 5 out of 5 by from Works wonderfully i'm an electrician by trade and I so enjoyed the instructions with this one. I tried the motion sensors years ago and they would not be consistent. But these are the cats meow and really makes me wonder how long before light switches are obsolete. Instructions are thorough and these things are configurable into any way you want them to work. Easy to use with a little thought and instruction reading. And they are teachable if you want to adjust them more! It is a light switch though, so you must have a little Handyman in you to instal them. So don't loose the instructions and don't just look at the pictures. You need to read what it says too. Above all, be safe...
Date published: 2015-04-21
Rated 3 out of 5 by from Need Neutral Wire version First and foremost, Lutron is THE company to go with for dimming anything. That said, I'm anxiously awaiting the neutral wire version of this dimmer. I've run into scenarios with a few LEDs that don't actually turn all the way off if this dimmer is used. The cause is simple, it's feeding current for the motion detector through the fixture. This is very normal for "old world" dimmers, before LED dimming became a thing and completely acceptable, that said, we need to move forward. Most houses built post 1999 will have neutral wire availability in the switch boxes (thank you romex) and this is a godsend for the newer lighting technologies. I'd recommend this dimmer for specifically stated compatible LED light sources but beyond that wait for the neutral wire version of it.
Date published: 2013-09-03
Rated 4 out of 5 by from Great for kid's bathroom I have a number of Lutron switches and outlets and was eager to try this one with occupancy sensor. It replaced a standard single pole decora switch in the bathroom downstairs that the kids use often...so now no more lights being left on! Installation was a breeze. After switching the power off from the breaker panel, I removed the face plate and single pole switch and disconnected the wires. The back of the Lutron switch has both screw terminals and push-in terminals, and since my solid wires were already cut and stripped to the correct length, all I had to do was push them into the push-in terminals and connect the ground wire. All the hardware is included; wire nuts, screws to mount the switch, and even a jumper wire for a 3-way switch rewire. The face plate, however, is not included. But this wasn't an issue since I was replacing an existing switch. This CL dimmer has a lot more flexibility for installations than I needed for my single pole replacement. But the programming features to customize how long the lights would stay on, the sensitivity, etc. were needed and appreciated. Most important to me was the timeout adjustment which allows you to set it to 1 min, 3 min, 5 min, 15 min or 30 min before the lights turn off after triggered. I set it for 5 min but may adjust it later. Also good to note is that you can customize the settings without having to remove the switch from the wall,and that this switch will work with dimmable CFL or LED bulbs. So far, it has worked very well with the kids. The only knock I have is that the switch doesn't seem to detect motion through a glass shower door, which could be because of the steam. In my installation, the switch faces a small shower with sliding glass doors, and after the timeout period, I had to open the door and wave my hand for it to active again. Anyway, this isn't a major issue since this shower is not used that often.
Date published: 2015-03-02
  • y_2017, m_11, d_20, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_62
  • loc_, sid_204475517, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 152ms
  • REVIEWS, PRODUCT