#1 Home Improvement Retailer

Internet # 100167331

Model # 87643

Store SKU # 462499

1-5/8 in. x 9 ft. Aluminum and Vinyl Garage Door Bottom

$27.52
Apply Now
Pay $2.52 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Apply under your garage door bottom for weather tight seal
  • Replaceable vinyl seal
  • Screws included for installation
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret

Product Details

The M-D Building Products 1-5/8 in. x 9 ft. Aluminum and Vinyl Garage Door Bottom features an aluminum base that attaches to a garage door with included screws. The aluminum base holds a vinyl seal designed to close the gap at the bottom of your garage door to prevent drafts, dirt, insects and rain from entering. Door bottom stays flexible in extremely cold temperatures.
  • For use under garage doors to seal out air, moisture and dust
  • Vinyl seal insert is held in place by a sturdy aluminum base
  • Aluminum base is fastened to the bottom of a garage door with the included screws
  • For use on single steel or wood roll-up garage doors
  • Stays flexible to -30°F
  • Set includes (2) 4.5 in. aluminum door bottom pieces and (1) 9 ft vinyl seal
  • Click here to learn more about Eco Options and Energy Efficiency
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

caret

Specifications

Dimensions: H 1.0 in, W 1.625 in, D 54.5 in

Dimensions

Product Depth (in.)54.5 inProduct Height (in.)1.0 in
Product Width (in.)1.625 in

Details

Builders Hardware Product TypeGarage Door HardwareFinishBlack
Package Quantity1Returnable90-Day

Warranty / Certifications

Manufacturer WarrantyNo
caret

Questions & Answers

32Questions
caret
Q:So the listed Specifications are incorrect? it should be H1.0in , W 1.625 in, D 108 in. (9ft) Not 54.5in,
by|Dec 3, 2023
1 Answer
Answer This Question

A:  Thank you for reaching out. Yes, 108 in. is the correct length. Thanks

by|Dec 7, 2023
    caret
    Q:My strip is 1 1/2 will this work to replace it
    by|Oct 6, 2023
    1 Answer
    Answer This Question

    A:  Thank you for reaching out. Please call our customer service at 800-654-8454 to discuss further.

    by|Oct 6, 2023
      caret
      Q:I have an 8 ft. door can 1 ft. be cut off easily
      by|Oct 2, 2023
      1 Answer
      Answer This Question

      A:  Thank you for reaching out. Yes, this can be cut to 8ft length with a hacksaw. Thanks

      by|Oct 2, 2023
        caret
        Q:Are the included screws stainless steel, or easy-to-rust carbon steel? Thanks.
        by|Sep 28, 2023
        1 Answer
        Answer This Question

        A:  Thank you for reaching out. These screws are zinc coated to avoid rust. Thanks

        by|Sep 28, 2023
          Showing 1-4 of 32
          caret

          Customer Reviews

          4.4 out of 5
          (325)
          • 4.4
            out of 325 reviews
          • 89% recommend this product
          Filter by:
          Showing 1-10 of 325 reviews
          I have an older Wayne Dalton door that has no direct replacement so I put this on and I’m satisfi...
          I have an older Wayne Dalton door that has no direct replacement so I put this on and I’m satisfied with the results. Thirty minute install.
          by
          • Verified Purchase
          • Recommended
          4 found this review helpful
          The aluminum is 1/4" wider than my door and old gasket. I was able to use it and have the extra ...
          The aluminum is 1/4" wider than my door and old gasket. I was able to use it and have the extra 1/4" on the outside of the garage door. With the 1/4" difference, mounting the aluminum was difficult because the type of screws you enclosed. The 1/4" made the aluminum not centered on the bottom of the door. The hex type screws made it very difficult to hit the middle of the bottom of the door to tighten with a ratchet socket set. Off center the screws were not long enough. I recommend you use a Phillips screws or flat head metal screws to make installation easier. Had to make the inside flush so it would fit the slides I laid the rubber gasket in the sun so I was able to slide it on one end and then pull to the other end. Seems to be working okay.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          A little bit flimsy compared to the one that was on there. The track came in two pcs. I didn't expect that
          by
            perfect fit for my 8ft garage door
            by
              The door bottom worked great to seal out any weather, and animals!
              by
                by
                  Works as advertised. As others stated, the hardware is junk but I planned on replacing it with longer screws in my application anyway.
                  by
                    I won’t say easy but it’s perfect fit for my garage
                    by
                      Easy to install, the quality is great for the price
                      by
                        EASY TO INSTALL, WORKS GREAT.
                        by
                          Showing 1-10 of 325 reviews