Internet #205833444

Model #57507

6 in. x 9 in. Aluminum Sheet

Product Overview

This aluminum metal is easy to cut, form, and fabricate. With its thin foil design, it is great for DIY projects such as candle and flower embellishments. MD Hobby and Craft offers a full assortment of aluminum sheets for any project you encounter.
  • Create your own DIY projects
  • Add metallic accents to any project
  • Easy to cut with hobby shears
  • Recommended for indoor use
  • California residents

Specifications

Dimensions

Product Depth (in.)
0.01
Product Height (in.)
9
Product Length (in.)
9
Product Thickness (in.)
0.01
Product Width (in.)
6
Width (in) x Length (in)
6 x 9

Details

Connector Coating
N/A
Corrosion Resistant
Yes
Fastener Type
Metal Stock
Finish Family
Silver Metallic
Indoor/Outdoor
Indoor
Material
Aluminum
Measurement Standard
Metric
Metal Stock Type
Sheet Metal
Package Quantity
1
Perforated
No
Product Weight (lb.)
0.23
Returnable
180-Day
Weldable
No

Warranty / Certifications

Manufacturer Warranty
No

Questions & Answers

162Questions17Answers

Is it paintable?

Asked by Jose February 23, 2021
1
Answer

Aluminum can be painted. To be successfully painted, the surface has to be prepared to increase the adhesion of the paint to insure that the paint sticks to the hard slick metallic surface. Look on line for information about painting aluminum. You will learn that surface preparation is required to to successfully paint "raw" aluminum.

do you remember the fiberglass sheets they used to cover your patio that it was shaped to be up a...

Asked by Smiley60 February 11, 2021
1
Answer

Home Depot carries and sells rib steel and corrugated metal roofing. Just go online and see what is available and fits your needs.

Is it food grade?

Asked by JerseyJoe January 17, 2021
1
Answer

"Food grade" Aluminum is a marketing term that does not reflect the suitability/safety of aluminum for use with food preparation, cooking, storage, or contact. Please review online information on "Food Grade" aluminum to confirm. Use as a grease tray would appear to be safe.

Could I use this to make an extended deflector for a floor heat register vent under a sofa? The p...

Asked by bug December 31, 2020
3
Answers

It would be fine for it as long as you wouldn't be putting weight on it.

Is this rust proof? Want to use it to wrap a tree to keep squirrels from going up the trunk.

Asked by Dave December 20, 2020
2
Answers

It is but likely to stiff for the purpose aluminum flashing would be easier.

can this be used as a a heat shield above a outdoor propane heater?

Asked by HungryMark December 12, 2020
2
Answers

Yes as long as you don't have it too close

Is this rated for high heat ?

Asked by Box17 December 8, 2020
3
Answers

It’s aluminum and take any temperature that aluminum can take. So yes.

Are there larger sizes available for the aluminum sheet metal?

Asked by renonative November 1, 2020
2
Answers

I would love to have larger sheets. Is there any available?

What Alloy of Aluminum is this sheet made of? Is it pure aluminum, and if so, how pure? 99.9% 00....

Asked by Steven October 17, 2020
1
Answer

We use different grades of aluminum 6063, 6005, 6061 and 6463.

I'm wanting to consider this product for patching a hole in aluminum siding where an old fuse box...

Asked by JayDee September 11, 2020
1
Answer

hello jaydee - if ur not concerned with a finished look, the aluminum is easy to drill / make a starter hole, then easily cut with metal snips - bu-ut because it's thin, ull need to handle fairly gently / with support to minimize distortion - and yes, i would sand 1st as the finish is very smooth - for a more durable surface, i would primer too ...

6 in. x 9 in. Aluminum Sheet - page 2

Customer Reviews

  • 4.3
    out of 276 reviews
  • 82% recommend this product
5star-icon170
4star-icon50
3star-icon23
2star-icon8
1star-icon25
Filter by:
Showing 1-10 of 276 reviews
Well, I used it to fix (let's say to cover) some damage on the wall behind the radiator heather, ...
Well, I used it to fix (let's say to cover) some damage on the wall behind the radiator heather, that is to close to the wall that even I can't use my hands to fix it. Thus that plate was the perfect item for me. Thanks Home Depot !!!!
by Guario
Poor advertising!
NOT 1/32" thick, it's 0.019" thick. And all pcs in stock were the same. There was NO 12" x 12" 1/32" aluminum sheet on display. Fortunately I can use the thinner material.
by Olgazer
Response from MDBuildingProductsSupportFeb 25, 2021
Thank you for your review. We hate to hear the product did not meet your expectations, we will pass your feedback on to our quality team to review.
1 person found this helpful
I used this sheet to seal off the base of a jerky drying rack I built a few years ago. Last year...
I used this sheet to seal off the base of a jerky drying rack I built a few years ago. Last year our neighborhood had an infestation of rats. To be prepared i am in the process of covering the rack in 1/2 inch wire mesh to allow air flow, and stop any unwanted critters.The jerky is fan dried for a week then it is ready. The base has no air circulation necessaty so a base plate saved me hours of extra labor.
by Tiki
Perfect door armor. I have to keep my dog locked up inside my laundry room while I am away at wor...
Perfect door armor. I have to keep my dog locked up inside my laundry room while I am away at work, otherwise she does things on the living room carpet that I don't like. She dug a hole through the wooden door one day so I bought this metal to armor the door and make it dog-claw proof. It works like a charm, no more holes in the door and her claws slide across it without harming her.
by neo1st
4 people found this helpful
Using some of this to line a home made wooden smoker.
Using some of this to line a home made wooden smoker.
by Ken722
1 person found this helpful
I wasted my money on this item. Home Depot should have a machine that cuts metal and glass like t...
I wasted my money on this item. Home Depot should have a machine that cuts metal and glass like they do for wood. I bought metal clippers but it didn't give a clean cut so the metal sheet is ruined. All clients aren't contractors. I needed this for a personal project
by Ddub
7 people found this helpful
This product was specifically picked out to be placed on my outside fireplace for grilling on as ...
This product was specifically picked out to be placed on my outside fireplace for grilling on as it had 1/2" holes in it. As the size I needed was 36" wide x 24" deep, so I folded over 24" and the 12" left over was placed in the back of fireplace under the blocks. So the folded 24" on itself works great for grilling over the wood fire and increases the life of the grill 2 fold....
by Rick
3 people found this helpful
I used it as a back splash behind my stove. It worked great.
I used it as a back splash behind my stove. It worked great.
by HomeDepotCustomer
2 people found this helpful
The aluminum sheet was sent to me in a cardboard box, but somehow several places on the edges of ...
The aluminum sheet was sent to me in a cardboard box, but somehow several places on the edges of the sheet was bent terribly. I was very disappointed, but didn't have time to return it. I will not order this product again.
by Farmer
3 people found this helpful
Worked perfectly for the project I was doing
I used this to create a spiral trellis and it worked exactly as I expected. I used the store pick up, which was very convenient for me.
by Mary
10 people found this helpful
Showing 1-10 of 276 reviews