Hello Wife and thank you for your interest in Ashville Towel Ring in Spot Resist Brushed Nickel. Moen has not tested/evaluated other ways of using this product; therefore, we cannot confirm/recommend this product can be used in this manner. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).
Savannah and MeCzech. No, it is NOT 7" from center to center. If you install it that way, the bar will miss the post. The installation instruction say it is 6.65" and the Moen guy says it is 6.68". I don't understand why they didn't give the measurement in fractions of an inch.
Yes. I installed mine on a tile wall in about 20 minutes. Just be sure to use a tile-glass bit to drill the holes in the tile and don't over tighten the screws which hold the mount brackets onto the tile. You could crack your wall tile...
I only saw the 18" and 24" lengths in the Ashville line when I searched for ours. Moen does make a few 30" towel bars in different styles though...
Not sure. The Ashville measures approx. 6 & 11/16" center to center. The back plate does measure approx. 2 & 3/16" across, so that does give you quite a bit of wiggle room to move your mounting holes. The chance that you'll find anything with identical mounting holes, that's not the exact same fixture, is pretty slim...
Hello Maalco and thank you for your interest in Moen products. We sincerely apologize for any inconvenience you may have experienced with your Moen Ashville Towel Ring in Spot Resist Brushed Nickel. If you are in need of technical support or have additional questions, please feel free to call us at 800-289-6636.
Either
Yes, but the tile should be reinforced on the backside with either a stud or a backer board. The holes for mounting should be pre-drilled.
No, mine work perfectly.
Hello KK and thank you for your interest in Moen products. The Moen DN4924BN Ashville 24 in. Towel Bar in Spot Resist Brushed Nickel bar has a 5/8” diameter. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).