A: Make sure the adhesive tube says it works on bathtub and shower walls
A: Not Sure! My guess is to read the contents of the various sealant adhesive to find the best one that is conducive to your PVC board.
A: I ran my sides up to the top of the window, which is taller than where the surround ends. It doesn't look perfect, but it doesn't look too bad either. I filled in the gap with silicon caulk. But, I think you could also terminate the sides at the same height were the surround ends, just make sure the window insert is well caulked and great paint is used to protect from water.
A: What you are describing is a on site adjustment. Go to www.mustee.com and look at the instruction manual for the window trim kit
A: The thickness is as follows: 52.600W Duratrim thermoplastic window kit @ .090 or 3/32" 300.600W Duratrim fiberglass window kit @ .125 or 1/8"
A: I'm not where I can measure it but it's 1/16 inch thick or very near that. I would call Mustee at 216-267-3100 or email them at email@example.com for exact thickness.
|Name||Duratrim Window Kit in White||Pro-Series 60 in. W x 57 in. H Five Piece Glue Up Tub Surrounds in High Gloss White||Duratrim 8 in. x 8 in. x 36 in. 5-Piece Easy Up Adhesive Tub/Shower Window Panel in White|
|Wall Width (in.)||36||60||36|
|Construction||Three piece||Five piece||Five piece|
|Wall Height (in.)||36||57||36|
|Wall Installation Type||Glue Up||Glue Up||Glue Up|
|THD SO SKU||1000894735||1000949088|
|View Product||View Product||View Product|