|Approximate Tile Size||5x11||Product Length (in.)||11 in|
|Product Thickness (mm)||9 mm||Product Width (in.)||5 in|
|Suggested Grout Line Size||No Grout Required|
|Application Location||Floor||Break Strength (lb.)||276 lb|
|Color Family||Blue||Color/Finish||MSI Montauk Blue Gauged Slate|
|Commercial / Residential||Commercial / Residential||DCOF Rating||Greater than or equal to 0.42|
|Edge Type||Flat||Flooring Look||Stone Look|
|Flooring Product Type||Decorative Accent||Indoor/Outdoor||Indoor|
|Returnable||90-Day||Style||Farmhouse, Mediterranean, Mission, Modern, Rustic|
|Tile Finish||Matte||Tile Format||Standard|
|Tile Material||Slate||Water Protection||Water Resistant|
|Manufacturer Warranty||1 Year Warranty. Call 1-877-636-1113 for complete warranty details, parts and installation inquiries|
A: Hi Jerry, Thank you for your question. I believe the Tuscany Classic is a little bit lighter than the Catalina Canyon Noce. With the Tuscany Classic being a natural stone, there are variances in the colour as some pieces are lighter in colour while some are darker. If you are interested in having vents made in your tile specifically, please feel free to reach out to us to move forward with that as firstname.lastname@example.org Thank you, Made2Match Product Expert
A: Hi Dave, thank you for reaching out. We presently do not offer these vents in MSI's Nero Marquina. You are welcome to get in touch with us if you would be interested in sending us your material to make the vents from for that perfect match. The Montauk Black and Hampshire Slate are actually both the same slate material, the manufacturer uses different names because of the different sizes they're offered in. To see how close of a match either would be, while our vents are not sold in stores, the materials they are made of are and you could pick the best match that way. For further questions please call us at 1-877-636-1113.
A: You can either grout these in place or leave them loose. For a 4"x10" duct these vents finish at 5"x11" and requires the current tile opening to be enlarged to fit the vent, as it sits on the subfloor for support. The damper doesn't have to be used but aids in leveling out your vent with your surrounding floor tile.
A: You can either grout these in place or leave them loose. For a 4"x10" duct these vents finish at 5"x11" and requires the current tile opening to be enlarged to fit the vent, as it sits on the subfloor for support. The damper doesn't have to be used.