Clean-ups just got easier with the Makita 36-Volt (18V X2) LXT/Corded 2.1 Gal. HEPA Filter Dry Dust Extractor/Vacuum Kit. The Dry Dust Extractor/Vacuum (XCV04Z tool only) offers corded or cordless operation for maximum versatility and convenience. In cordless operation, the Dry Dust Extractor/Vacuum is powered by two 18-Volt LXT batteries for 36-Volt power and run-time, without leaving the 18-Volt LXT battery platform. Using two 18-Volt 5.0Ah batteries, the Dry Dust Extractor/Vacuum delivers up to 65 minutes of continuous run time on low setting and 30 minutes on high setting. The powerful Makita-built motor delivers 74 CFM and 36 in. water lift of suction on battery operation. In corded operation, the vacuum delivers 127 CFM and 96 in. water lift. The 19.7 ft. power cord combined with the anti-static hoses (1-1/2 in. x 8 ft. or 1 in. x 11-1/2 ft., both included) provide extended reach for fast clean-ups. The Dry Dust Extractor/Vacuum has a 3-stage filtration system engineered for efficient cleaning and to extend the life of the main filter. The system consists of a Pre-Filter Bag (captures larger dust particulates), Damper Filter (captures much smaller particulates) and Main Filter (captures micro particles). All three filter components are included.
Powerful Makita-built motor delivers 127 CFM and 96 in. water lift of suction using corded power
Powerful Makita built motor delivers 74 CFM and 36 in. water lift of suction using two 18-Volt LXT lithium-ion batteries
Up to 65-minutes of continuous run time on low setting and 30-minutes on high setting using two 18-Volt LXT lithium-ion 5.0 Ah batteries BL1850B
Efficient three stage HEPA filtration system captures 99.97% of particulates 0.3 microns and larger extending the life of the main filter
Filter cleaning system is designed to maintain optimum suction efficiency and longer filter life
Precision lightweight motor components and efficient air ducting produce a vacuum weight of only 21.8 lbs. with batteries
Oversized on-off switch for operator convenience
Motor chamber constructed of quality sound-absorbing materials for quiet operating sound levels, 75 dB(A) using corded power and 64 dB(A) using battery power
Variable speed control dial for a variety of applications
Large rubber bumper helps prevent damage to the work environment
Locking cover for added protection of batteries
Equipped with 19.7 ft. cord and 2 anti-static hoses (1-1/2 in. x 8 and 1 x 11-1/2 ft.) for extended reach
Quick-release metal latches for easy removal and disposal of debris from canister
Rear casters feature locking levers to prevent the vacuum from moving
Removable storage box for storing attachments, batteries and cord rack
Dual L.E.D. battery indicators show charge level for each 18-Volt LXT lithium-ion 5.0 Ah battery
18-Volt LXT lithium-ion 5.0 Ah battery BL1850B provides up to 65% more run time per charge compared to BL1830
18-Volt LXT lithium-ion 5.0 Ah battery BL1850B reaches a full charge in 45-minutes or less
3-year limited warranty on tool, battery and charger
Questions & Answers
Typical questions asked about products:
Is the product durable?
Is the product easy to use?
What are the dimensions of the product?
out of 679 reviews
95% recommend this product
Showing 1-10 of 679 reviews
Apr 9, 2021
I really like the Makita line of tools great quality and reliability. These batteries are great t...
I really like the Makita line of tools great quality and reliability. These batteries are great they last a long time because of how the charger keeps them cool while charging. I got them a great price.
1 person found this helpful
Jul 8, 2020
All my battery powered tools are Makita so any time Home Depot has these 2pks on sale I grab them...
All my battery powered tools are Makita so any time Home Depot has these 2pks on sale I grab them up. I love my Makita tools they have performed perfectly every time.
1 person found this helpful
Aug 15, 2019
The best saw I have...
The best saw I have
Aug 3, 2019
Got these on clearance. Perfect size and run time. They...
Got these on clearance. Perfect size and run time. They are the same size as the 3.0Ah ones but with a longer run time. Note: They will not work with older Makita tools that don't have the star on the battery receiver or yellow receiver and don't support the safety features of the newer batteries. Check the notches. Will not work with the bigger notch.
15 people found this helpful
Apr 26, 2019
I had the 2.0ah that came with the drill which did great. But these are amazing. I have yet to ha...
I had the 2.0ah that came with the drill which did great. But these are amazing. I have yet to have a project that I have ran these 5ah to even half. I wish I would have bought them a long time ago. I love the push bottom power indicator. The 5ah are only 1/2 longer than the 2ah batteries and the weight difference is minimal.
9 people found this helpful
Jan 20, 2019
They work good but they don’t fit in my sawzal or circular saw or angle grinder they are only a f...
They work good but they don’t fit in my sawzal or circular saw or angle grinder they are only a few years old and were the primary reason for getting the bigger batteries
I am pretty upset about them not working in my tools
9 people found this helpful
Apr 25, 2018
Battery worked well for me, I used this for my x2 tracksaw. Not enough to drain the battery so I ...
Battery worked well for me, I used this for my x2 tracksaw. Not enough to drain the battery so I can not attest to how long they will last for. Also with the rapid charger they charge in 45minutes which is greater
Dec 6, 2017
I needed to buy new batteries to complete a deck project after my last original 3.0Ah battery die...
I needed to buy new batteries to complete a deck project after my last original 3.0Ah battery died (after 12-13 years), and swapping around the one 4.0Ah battery I had really slowed things down ("Are you done with the battery yet? OK. Throw it over to me.")
The fuel gauge is pretty nice after all the years of not knowing how close you were to a dead battery. And the capacity is pretty amazing. I used the packs for hours of screwing or drilling into pressure-treated lumber, and rarely got to half power. The only thing that challenged the batteries was the circular saw; cutting through a very wet, pressure-treated 2x12, cutting stair stringers. 12 feet took 3 batteries (almost with 2).
5 people found this helpful
Nov 2, 2016
Long lasting battery. Used it to power a random orbital sander for 30 minutes, almost continuous...
Long lasting battery. Used it to power a random orbital sander for 30 minutes, almost continuously. Still had 2 bars. Plugged it in the reciprocating saw to remove a door. Still showed 2 bars. They also last a while on the circular saw. With (2) 3Ah, (1) 4Ah, (2) 5Ah batteries & two chargers, I have enough batteries for all day, powering drill, impact driver, recip saw, circular saw, RO sander, and grinder. The battery level indicator is handy, but Makita should put them on the same side as the release button. As it is, when you plug the battery in, you can't check the battery level without first removing it.
3 people found this helpful
Oct 5, 2016
Small but powerful.
This Makita corded and cordless dry vacuum cleaner is very well made. Mine was delivered with a 38 and 22 mm diameter hoses for picking up large and small waste respectively. Also provided were a straight and bent pipe, floor brush, corner nozzle, batteries and battery charger, ten extra polyethylene bags, and what I think may be two "front cuffs". (I will explain later.) No brush suitable for dusting was included; however, this may be purchased separately. The unit has a lot of suction power for its small size and the amount of suction is adjustable. The vacuum is amazingly quiet. On the negative side the instruction manual says not to pull the unit around by the hose; however, that is how I normally vacuum. The unit also does not move easily, the wheels do not swivel very well. I found myself having to stop vacuuming in order to go back to the unit to manually change its direction. Also, when vacuuming the floor I found the bent pipe extension that is attached to the floor brush to be very awkward to use. It is great for getting under objects but for general vacuuming use of the garage or shop floor I was very uncomfortable in pushing the brush across the floor; it seemed to take more effort than my old garage vac.
The unit will operate without its batteries installed which is a nice feature. The use of disposable polyethylene bags greatly simplifies disposing of the collected waste. You must read the instruction manual in detailed to completely understand the correct procedures for cleaning the various filters so they are not accidentally damaged.
My unit came with two additional parts that I could not readily identify and which are not addressed in the instruction manual. I searched on the internet and found them to possible be "Front Cuffs". Apparently, they are meant to allow me to attach other vacuum accessories of different hose diameters. Reportedly, the cuffs screw into the hoses that came with the unit so I can attach one of my many accessories which I have accumulated over the years from previous garage vacuums. However, the "cuffs" would not screw into either one of the unit's vacuum hoses or attach to any of my other accessories. I did not want to ruin the cuffs by forcing them to fit.
I provided a couple pictures of the unit. One is a picture of my storage mode of the unit. There is a nice and neat picture of how the unit assembly should look when done vacuuming and you are storing it till the next time. No matter what I tried I could not get my storage configuration to look like the one in the book. The AC cord does not wrap around the storage box in back of the unit, and etcetera.
Basically, I am disappointed with this vacuum.
Clean-ups just got easier with the MakitaClean-ups just got easier with the Makita 18V X2 (36V) LXT Lithium-Ion Cordless/Corded 4 Gallon HEPA Filter Dry Dust Extractor/Vacuum Kit (XCV13PT). The Dry Dust Extractor/Vacuum offers corded or cordless operation for maximum versatility and convenience. In cordless operation, the Dry Dust Extractor/Vacuum is powered by two 18V LXT batteries for 36V power and run-time, without leaving the 18V LXT battery platform. Using two 18V 5.0Ah batteries, the Dry Dust Extractor/Vacuum delivers up to 65 minutes of continuous run time on low setting and 30 minutes on high setting. The powerful Makita-built motor delivers 74 CFM and 36" water lift of suction on battery operation. In corded operation, the vacuum delivers 127 CFM and 96" water lift. The 19.7' power cord combined with the anti-static hoses (1-1/2" x 8' or 1" x 11-1/2', both included) provide extended reach for fast clean-ups. The Dry Dust Extractor/Vacuum has a 3-stage filtration system engineered for efficient cleaning and to extend the life of the main filter. The system consists of a Pre-Filter Bag (captures larger dust particulates), Damper Filter (captures much smaller particulates) and Main Filter (captures micro particles). All three filter components are included.See Full Product Description
The 40V max XGT Brushless Cordless 4-SpeedThe 40V max XGT Brushless Cordless 4-Speed Compact Vacuum Kit (GLC01R1) is a compact and powerful cordless vacuum with strong suction for fast and efficient cleaning in commercial or residential use. This vacuum gets up to 80 minutes of continuous use in low speed using a single fully charged 40V max XGT 2.5Ah Battery. The powerful Makita-built brushless motor delivers up to 42 CFM and 84" static water lift. The vacuum has a quiet operating sound level of 65dB(A) on high and 54dB(A) on low. The efficient two-stage HEPA filter captures 99.97% of particulates .3 microns and larger. The bagless cloth filtration system allows for easier cleaning and quicker disposal of debris. The compact vacuum weighs only 3.7 lbs. with battery (sold separately). It stores easily with the included storage bracket. XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.See Full Product Description
JDCS MW Dust Collector Stand
JETS new Metal Dust Collection Stand is greatJETS new Metal Dust Collection Stand is great for collecting abrasive dust from most brands Bench Grinders and Bench Top Belt and Disc Sanders. Non-sparking aluminum fan blade and housing eliminates the risk of fire during the collection of abrasive dust and chips. JET backs this machine with its 2-Year Warranty.See Full Product Description