Internet #301238976

Model #XTP02Z

Store SKU #1002499863

Store SO SKU #1002316595

18-Volt LXT Lithium-Ion 23-Gauge Cordless Pin Nailer (Tool-Only)

  • 6 different lengths: 5/8", 11/16", 3/4", 1", 1-3/16", 1-3/8"
  • Drive up to 5,300 pins on a single charge with 5.0Ah Battery
  • Tool has a 3-year limited warranty from date of purchase
  • See More Details

Frequently Bought Together

+
+
Price:
$17900
$189.00
Save $10.00 (5%)

Product Overview

18-Volt, Lithium Ion, Cordless, Innovation

World's Largest 18V Lithium-Ion System

With each cordless tool, you hold over 100 years of motor engineering and over 40 years of cordless innovation

High Output, one platform, compatible, 18V, 36V, tools, OPE

One System. Endless Possibilities.

Use the same batteries and chargers with all 36V and 18V LXT tools

LXT, Advantage, durable, dependable, 18V, tool, battery, charger

The LXT Advantage

4 key components make up the LXT® Advantage, providing you with the most advanced, durable and dependable 18V products

high performance, cordless, batteries

Maximum Performance. No Cords Needed.

Break free from the cord with two 18V LXT® batteries.

Cut, Cutter, Power, battery, platform, run time

Premium Power and Run Time

LXT® is the one-battery solution for contractors that require a cordless tool system that helps them be more productive

Electric, Rapid, STAR, Protection, speed, fast charge

Compact Design and Performance

LXT® Compact continues to refine the formula of faster-charging batteries, more power and speed, and a leading power-to-weight ratio

36V, 36 Volt, compact, 18V, lightweight, subcompact, sub-compact, innovation

A New Class in Cordless

The most compact and lightweight go-anywhere 18V solution

STAR, Protection, Computer, Controls, overload, overdischarge, overheat, rapid charge

Faster Charging

The Rapid Optimum Charger communicates with the battery’s built-in chip to optimize battery life

overloading, overdischarging, overheating, run time, power

More Run Time

Battery delivers constant power and run time in extreme temperatures, even in winter

slide, terminal, premium

Longer Motor Life

Makita-built Brushless Motor eliminates carbon brushes, so the motor runs cooler and more efficiently

max, power, speed, run, time

Efficient Power Management

Overload protection, Over-discharge protection and Overheat protection

durable, dependable, advanced

Star Protection

Star Protection is communication technology that protects against overload, over-discharge and overheating

authorized, service, center, repair, replace, warranty, 3 year

3-Year Limited Warranty

On every Makita Lithium-Ion Tool, Battery and Charger from the date of original purchase.

The Makita 18-Volt LXT Lithium-Ion Cordless Pin Nailer, 23-Gauge (model XTP02Z, tool only), is a hose-free solution for installing casings, decorative trim, molding and baseboards. The XTP02Z is compact and powerful and drives 5 different pin nail lengths (5/8 in., 11/16 in., 1 in., 1-3/16 in. and 1-3/8 in.) with a magazine capacity of up to 120 nails. Using the 18-Volt LXT 4.0Ah battery, the XTP02Z will drive up to 4,250 nails on a single charge. Its part of Makita expanding 18-Volt Lithium-Ion series, the worlds largest cordless tool line-up powered by an 18-Volt Lithium-Ion slide-style battery. Makita 18-Volt Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18-Volt LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
  • Refined firing mechanism reduces recoil, reduces force required on the work surface when driving pins
  • Drives 6 different lengths, 5/8 in., 11/16 in., 3/4 in., 1 in., 1-3/16 in. and 1-3/8 in., of 23-Gauge pin nails (tool does not work with 1-1/4 in. pin nails)
  • Magazine capacity up to 120 pin nails
  • Tool-less depth adjustment for precise flush and countersink finish
  • Cordless for increased convenience, eliminates the need for a compressor and air hose
  • Contact trigger for improved accuracy and precision
  • Built-in LED light illuminates the work area
  • Ergonomically designed handle with rubberized soft grip provides increased comfort
  • Rubber bumpers protect the tool and surface from damage
  • Reversible tool hook allows the tool to remain close
  • Narrow nose design allows easy nailing access in confined areas
  • Compact and ergonomic design at only 10-1/8 in. L
  • Weighs only 4.9 lbs. with battery (battery not included) for reduced operator fatigue
  • Equipped with star protection computer controls to protect against overloading, over-discharging and over-heating
  • Compatible with Makita 18-Volt lithium-ion batteries with a star symbol (battery sold separately)
  • Battery and charger sold separately
  • 3-year limited warranty
  • Only use genuine Makita batteries and chargers
  • Shop all Makita products
  • Check out our helpful buying guide to learn more about nailers.






  • Click here for more information on Electronic Recycling Programs
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
3.7 in
Product Height (in.)
9.4 in
Product Width (in.)
11.3 in

Details

Air Tool Type
Air Nailer
Battery Amp Hours
No Battery
Battery/Charger
Tool Only
Charger Included
Charger Not Included
Condition
New
Cordless/ Corded
Cordless
Included
No additional components or accessories are included
Maximum Fastener Size
1-3/8 in
Minimum Fastener Size
5/8 in
Motor Type
Brushed
Nail Gauge
23
Nailgun Angle
0
Number of Total Batteries Included
0
Power Type
Cordless Electric
Reconditioned
No
Returnable
180-Day
Tools Product Type
Air Tool

Questions & Answers

13Questions20Answers

can you use this to nail 2x2 to concrete floor ?

Asked by Eddie500 June 30, 2020
3
Answers

I don't think this would work well for that - the maximum length is 1-38" nails - the 23 gauge nails are also quite small and I don't think would sufficiently hold the wood to the concrete even if the nails reached

does this model require LXT batteries? i already have BL1840B battery

Asked by Michael May 27, 2020
2
Answers

Yes

Does this pin nailer require oil?

Asked by Missouri February 3, 2020
2
Answers

Thank you for your question. No, the XTP02Z 18V LXT® Lithium-Ion Cordless 1-3/8" Pin Nailer, 23 Ga., Tool Only does not require oil.

This is good for quarter around?

Asked by Jerson January 18, 2020
2
Answers

Thank you for your question, but we will require more specific information in order to provide an answer. Call the Makita Call Center during business hours at (800)4-MAKITA, they’re based in Buford, GA and are ready to help.

I have a bl1830 battery .Will it work? It is a LXT 3AMP

Asked by Deuce December 2, 2019
1
Answer

Thank you for your question. The XTP02Z 18V LXT® Lithium-Ion Cordless 1-3/8" Pin Nailer, 23 Ga., Tool Only is compatible with all 18V Lithium-Ion batteries with a Star symbol including the BL1830B.

Can I use a 5 amp battery?

Asked by Fredster September 22, 2019
2
Answers

Thank you for your question. Yes, the XTP02Z is compatible with all Makita 18V Lithium-Ion batteries with a Star symbol including the BL1850B.

Does this nail gun require a gas canister with battery or just battery?

Asked by Tswizzle August 30, 2019
2
Answers

Thank you for your question. The XTP02Z 18V LXT® Lithium-Ion Cordless 1-3/8" Pin Nailer, 23 Ga., Tool Only does not require a gas canister. It only requires a Makita 18V Lithium-Ion batteries with a Star symbol (battery sold separately).

Why did Makita put such a junk item on the market?

Asked by Allhomeimprovements August 18, 2019
2
Answers

We apologize for any inconvenience, but we will require more specific information in order to address your concern. Please call the Makita Call Center during business hours at (800)4-MAKITA, they’re based in Buford, GA and are ready to help.

what type of nails does this gun take? With head or headless pins only.

Asked by fps January 17, 2019
2
Answers

Thank you for your question. The XTP02Z 18V LXT® Lithium-Ion Cordless 1-3/8" Pin Nailer, 23 Ga., Tool Only Drives 6 different lengths, 5/8", 11/16", 3/4", 1", 1-3/16" and 1-3/8", of 23 gauge pin nails (tool does not work with 1-1/4" pin nails).

Will this work with the 12 v 4 amp battery?

Asked by Alejo October 8, 2018
2
Answers

No . Es sólo para 18 v

18-Volt LXT Lithium-Ion 23-Gauge Cordless Pin Nailer (Tool-Only) - page 2

Customer Reviews

  • 3.2
    out of 113 reviews
  • 48% recommend this product
5star-icon47
4star-icon6
3star-icon13
2star-icon10
1star-icon37
Filter by:
Showing 1-10 of 113 reviews
Lasted 1 week
Out of the box I was getting jams around every 4th nail. And one of the metal rails next to the firing pin snapped after about 2 weeks of very light use. No difference in results after oiling and trying 3 different brands of nails,including recommend Porta Cable.
by Milestone
Take it from me
I’m a union finish Carpenter and I’ve been in the union for 26 years and just bought 2 of the Cordless makita 23g pin guns for A job in a high end hotel in Boston they wanted to add a piece of wood in behind some vanity draw pulls for support it was a oak to oak application In every room so it was about 250 rooms 2 draws per room this gun worked perfectly never jammed never miss fired this gun worked like a charm and it beat dragging my compressor and hose to every floor and room Don’t listen to any of the bad reviews there is a lot of guys out there who think there a finish carpenter But in reality there a sub par handyman I only use Makita Now and have tried every tool on the planet they last and are reliable! Thanks Jason
by Jason
4 people found this helpful
It's a good thing this wasn't the first Makita tool I've purchased! Out of the box, using Porter-...
It's a good thing this wasn't the first Makita tool I've purchased! Out of the box, using Porter-Cable 23g (which Home Depot recommends with this purchase) test fired three into scrap stock - ohh this is going to be sweet! Umm, no, no it actually isn't. Same stock, same pins, same depth setting - bent about every third pin into a fishhook inside the feed channel. Some broke off and required extra extrication. Then, the jams changed to where it was stripping a segment of 3-5 pins off the end and jamming them in the feed. Oh, and no indication of the jam until your work doesn't stick where it's supposed to... Spent more time "unjamming" than nailing. Now, I gotta say, "I like most of my Makita stuff." One star only because zero isn't an option.
by DTjr
7 people found this helpful
Stopped firing on 2nd day of use
Makita makes great tools. This is NOT one of them.
by Hunter
by DENNIS
Jams on last few nails and doesn’t set nails completely...
Jams on last few nails and doesn’t set nails completely
by HomeDepotCustomer
I would never buy this product again it is unreliable...
I would never buy this product again it is unreliable will not consistently shoot 1 inch pin and has cost me more time and money than it's worth
by JOSEPH
Too many jams
Nailer jammed on the third shot out of the box. I used Porter Cable 3/4" and 1" pins to test. Shooting through 1/2" plywood the 1" would not sit flush even with max depth setting. The 3/4 would sit flush 80% of the time but jammed ever few shots (same as the 1"). Clearing the jams isn't tool free so it's a bit of a chore. Weight wise it's nice with a 2ah battery. I tested with both a 2ah and 4ah and it does feel a bit too heavy with the 4ah installed. Maybe mine was defective so your mileage may vary, I'm just going to move on to a different brand, if HD would ever get one of them in stock.
by
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
by lmnx
Showing 1-10 of 113 reviews