Internet #207054643

Model #XT269M

Store SKU #1001815587

Store SO SKU #1001802541

18-Volt LXT Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) w/ (2) 4Ah Batteries, Bag

  • Impact- 1500 in.lbs of torque, Hammer Drill- 530 in.lbs of torque
  • Brushless motor eliminates carbon brushes for longer tool life
  • 3-year limited warranty on the tool, battery and charger
  • See More Details

Frequently Bought Together


Product Overview

18-Volt, Lithium Ion, Cordless, Innovation

World's Largest 18V Lithium-Ion System

With each cordless tool, you hold over 100 years of motor engineering and over 40 years of cordless innovation

High Output, one platform, compatible, 18V, 36V, tools, OPE

One System. Endless Possibilities.

Use the same batteries and chargers with all 36V and 18V LXT tools

LXT, Advantage, durable, dependable, 18V, tool, battery, charger

The LXT Advantage

4 key components make up the LXT® Advantage, providing you with the most advanced, durable and dependable 18V products

high performance, cordless, batteries

Maximum Performance. No Cords Needed.

Break free from the cord with two 18V LXT® batteries.

Cut, Cutter, Power, battery, platform, run time

Premium Power and Run Time

LXT® is the one-battery solution for contractors that require a cordless tool system that helps them be more productive

Electric, Rapid, STAR, Protection, speed, fast charge

Compact Design and Performance

LXT® Compact continues to refine the formula of faster-charging batteries, more power and speed, and a leading power-to-weight ratio

36V, 36 Volt, compact, 18V, lightweight, subcompact, sub-compact, innovation

A New Class in Cordless

The most compact and lightweight go-anywhere 18V solution

STAR, Protection, Computer, Controls, overload, overdischarge, overheat, rapid charge

Faster Charging

The Rapid Optimum Charger communicates with the battery’s built-in chip to optimize battery life

overloading, overdischarging, overheating, run time, power

More Run Time

Battery delivers constant power and run time in extreme temperatures, even in winter

slide, terminal, premium

Longer Motor Life

Makita-built Brushless Motor eliminates carbon brushes, so the motor runs cooler and more efficiently

max, power, speed, run, time

Efficient Power Management

Overload protection, Over-discharge protection and Overheat protection

durable, dependable, advanced

Star Protection

Star Protection is communication technology that protects against overload, over-discharge and overheating

authorized, service, center, repair, replace, warranty, 3 year

3-Year Limited Warranty

On every Makita Lithium-Ion Tool, Battery and Charger from the date of original purchase.

Makita has the world’s largest 18-Volt cordless tool line-up, and the 18-Volt LXT Lithium-Ion Cordless 2-Piece Combo Kit packs 2 compact cordless tools with efficient brushless motors for a full range of drilling, driving, and fastening applications. The XT269M includes a versatile 1/2 in. hammer driver-drill with all-metal gear construction for applications in wood, metal and masonry. The powerful impact driver weighs only 3.3 lbs. (with 4.0Ah battery), yet delivers a full 1,500 in. lbs. of torque. Both tools are equipped with an efficient and compact brushless motor that is engineered for longer run time, increased power and speed, and longer tool life. The 18-Volt LXT 4.0Ah battery has a category-leading charge time of only 40 minutes for less downtime and increased productivity, and includes an on-board LED charge level indicator for increased convenience. For increased versatility, the tool can also be powered by Makita 18-Volt LXT and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside. 18-Volt LXT 4.0Ah batteries (BL1840 and BL1840B) are compatible only with Star Protection tools, indicated by the Star Symbol and or Yellow Battery Receiver under the tool. There are over 125 Makita 18-Volt cordless tools with Star Protection, and more are on the way.
  • California residents
  • Includes: 18-Volt LXT brushless impact driver (XDT13Z), 18-Volt LXT hammer drill (XPH12Z), two 18-Volt LXT lithium-ion 4.0Ah batteries (BL1840B), 18-Volt lithium-ion rapid optimum charger (DC18RC), tool bag
  • Efficient BL brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
  • BL brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
  • Electronically-controlled BL brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • Variable 2-speed 1/2 in. hammer driver-drill (0-500 and 0-2000 RPM) with BL brushless motor delivers 530 in. lbs. of max torque; weighs only 4.2 lbs. with battery
  • Variable speed impact driver (0-3400 RPM and 0-3600 IPM) with BL brushless motor delivers 1500 in. lbs. of max torque; weighs only 3.3 lbs. with battery
  • 3-stage LED gauge indicates battery charge level
  • Hammer driver-drill features extreme protection technology (XPT), which is engineered to provide increased dust and water resistance in harsh job site conditions
  • Built-in dual LED lights illuminate the work area
  • Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
  • Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
  • 18V LXT Lithium-Ion 4.0Ah battery BL1840B features an integrated LED battery charge level indicator
  • 18V LXT Lithium-Ion 4.0Ah battery BL1840B provides up to 35% more run time per charge compared to the 18V LXT Lithium-Ion 3.0Ah battery, BL1830B
  • 18V LXT Lithium-Ion 4.0Ah battery BL1840B reaches a full charge in 40 minutes or less
  • Rapid optimum charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
  • Rapid optimum charger has a built-in fan which cools the battery for faster, more efficient charging
  • 3-year limited warranty on tool, battery and charger
  • Only use genuine Makita batteries and chargers
  • Shop all Makita products

  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Shop Tool Gift Savings

20-Volt MAX XR Cordless Brushless Hammer Drill/Impact Combo Kit (2-Tool) with (1) Battery 2Ah and (1) Battery 4Ah
current product
18-Volt LXT Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) w/ (2) 4Ah Batteries, Bag
20-Volt MAX Lithium-Ion Cordless Brushless Combo Kit (2-Tool) with FLEXVOLT and 20-Volt Battery and Charger18-Volt LXT Lithium-ion Brushless Cordless 2-piece Combo Kit (Hammer Drill/ Impact Driver) 5.0Ah
Name20-Volt MAX XR Cordless Brushless Hammer Drill/Impact Combo Kit (2-Tool) with (1) Battery 2Ah and (1) Battery 4Ah18-Volt LXT Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) w/ (2) 4Ah Batteries, Bag20-Volt MAX Lithium-Ion Cordless Brushless Combo Kit (2-Tool) with FLEXVOLT and 20-Volt Battery and Charger18-Volt LXT Lithium-ion Brushless Cordless 2-piece Combo Kit (Hammer Drill/ Impact Driver) 5.0Ah
Save $100.00 (25%)
Power Tool FeaturesKeyless Chuck,LED Light,Variable SpeedNo Additional FeaturesKeyless ChuckBag Included,Brushless,Keyless Chuck,LED Light,Second Handle Included,Variable Speed
Number of Tools Included2222
Battery Power TypeLithium IonLithium IonLithium IonLithium Ion
Cordless/ CordedCordlessCordlessCordlessCordless
Number of Total Batteries Included2222
Motor TypeBrushlessBrushlessBrushlessBrushless
Voltage (v)20v18v20v18v
View ProductView ProductView ProductView Product



Battery Power Type
Lithium Ion
Charger Included
Charger Included
Color Family
Cordless Tool Type
Combo Kit
Cordless/ Corded
Tool Bag
Motor Type
Number of Tools (Bonus Tool Not Included)
Number of Tools Included
Number of Total Batteries Included
Power Tool Features
No Additional Features
Tools Included
Hammer Driver Drill,Impact Driver
Tools Product Type
Power Tool
Voltage (v)

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
3-year limited warranty on tool, battery and charger

Questions & Answers


Is it normal for it to take one hour to charge one of these batteries?

Asked by John March 2, 2018

As the manufacturer said, it will take approximately 45 mins to fully charge the battery. Temperature is another factor that may make charging process longer

Would it be easy to cut 2 feet long of 1 inch thick Oak with this?

Asked by Howie July 22, 2018

Thank you for your question. You could make this cut, but it would consume several blades and it would be extremely slow. I would recommend using a circular or reciprocating saw for this job.

How long will it take to charge one of these batteries when it’s completely discharged?

Asked by John March 2, 2018

it takes 45 minutes

does it come with the battery

Asked by djb November 20, 2017


does this battery fit all 18 volt Makita tools what is star rated

Asked by redneck March 12, 2018

Yes. I believe so. Fits all my Makitas.


Asked by Jimmie February 21, 2020

Any of the 18V Makita batteries are compatible.

Does it have a light?

Asked by Mark August 19, 2019

No light. The only LED is the low battery indicator

Thus the battery go inward, or from the side

Asked by Ruben March 19, 2018

It slides from the back. Forward. Do not buy. It is really a toy, not a tool. Read my complete review. Underpowered.

Can you get a hard case to go with this?

Asked by Nic January 31, 2020

No , if there is a case available it would be purchased separately.

I just purchased a Makita 12 inch chainsaw. At the time a couple of months ago I purchased a Cord...

Asked by Dennis March 17, 2019

Buying the Makita 5.0 Lithium batteries for any one of your power tools is the best way to go for longer usage and even more power supplied to make sure your work is completed without having to stop and recharge a less 2.0 battery. Enjoy and feel the power of 5.0 the way that I do and Thanks for asking your questions. From : Paul Carrillo, the Pro Engineer

18-Volt LXT Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) w/ (2) 4Ah Batteries, Bag - page 2

Customer Reviews

  • 2484 Customer Reviews
  • 4.6 out of 5 stars overall
89% of customers recommended.
Overall Ratings
Sort By:
it's light easy to carry out and Powerful...
it's light easy to carry out and Powerful
Was this helpful?
it's light and Powerful...
it's light and Powerful
Was this helpful?
Good Kit at a Decent Price Point
Bought this compact combo, which included an extra 2AH Battery. Was looking hard at the Big Red M tool line, but based on more than a few negative comments on the Red Hammer Drill I decided to go with Makita, Besides, I would rather have a Japanese tool over a China tool any day. Both the drill and the impact are very powerful. I like the advanced battery charger system with a chip in the battery and a CPU in the charger to enable a precision charge that optimizes battery charge and health. I like both tools fell solid and run great. I only have a couple of gripes after two days of steady use. First, the light on the tool is located just above the trigger and aims up at the bit. Only problem is that since the light is below the bit, you don’t actually get any light where you need it. The light is very bright, which tends to magnify the darkness of the shadow on top of the bit where you are looking trying to see the screw. The attached pic demonstrates the shadow effect, although this was taken in a well lit garage so the effect is not as pronounced in the photo, but I think you can get the idea. It’s tough to see anything of the top of the bit or screw in darker areas. Makita needs to adopt the three light setup around the face of the tool. Last gripe has to do with the fwd/rev selector switch, which is a standard type switch that you push from right to left for forward and vice versa for reverse. The switch is like butter, which normally would be a good thing. As long as you are running the drill in forward the switch is fine, but I find when I have the drill in reverse the selector switch rides right where my trigger finger wants to ride and with that buttery selector switch, there is a tendency to inadvertantly move the switch to the netural positon or to the forward position as you manipulate the tool. This is a great set for the money, but if I did a lot of work in dark areas the light would be a deal breaker for me, you just can’t see anything without addtional light on the work. If you work in well lit areas or only occasionally work in dark areas it will be fine. The selector switch is something that I will get used to in time. These two gripes warrant the 4 star rating.
Was this helpful?
Combine this multi tool with a 5Amp Battery and it...
Combine this multi tool with a 5Amp Battery and it will not let you down! HIGHLY recommend and will absolutely buy again if mine ever breaks. I use this daily for work, cutting subfloor, drywall, and other miscellaneous things for work and I always know I can count on my multi-tool. Easy to use. Easy to understand. Has six different power modes set in the side- super easy to learn. I love it.
Was this helpful?
Does everything I expected it to. Love the Makita wireless...
Does everything I expected it to. Love the Makita wireless and brushless line up. Have used this tool almost everyday since purchasing it.
Was this helpful?
Purchased this xrj01z saw over the traditional xrj04x. Removed it from the box and installed a D...
Quality :
Value :
Purchased this xrj01z saw over the traditional xrj04x. Removed it from the box and installed a Diablo bimetal 6inch blade for cutting wood and nails. Started cutting through an old floor joist and the blade guide broke. Home Depot was gracious and allowed me to return it and upgrade to the xrj04x. The xrj01z, in my experience, is more of a light duty tool. This would be good for cutting PVC and other light application materials. I own several (6) makita tools and this is the only one I've ever had an issue with. The xrj04x is running like a champ on the demo. I have not lost faith in Makita, but this was not a good tool for moderate to heavy use applications YEMV.
Was this helpful?
All my battery powered tools are Makita so any time Home Depot has these 2pks on sale I grab them...
All my battery powered tools are Makita so any time Home Depot has these 2pks on sale I grab them up. I love my Makita tools they have performed perfectly every time.
Was this helpful?
Everything I expected. Great balance.
Everything I expected. Great balance.
Was this helpful?
XT333X1 - True Review
This was purchased during the 2018 Black Friday Deal and it came with x4 BL1850 batteries (separate packaging) I have been using this kit for over a year now and it has standed to everything I could have expected. Pros: Durability, Brushless, Power, Quite, Lightweight, different options of batteries Cons: Only a single bay charger - obviously this is a stretch for the price but being that this comes with x6 batteries but only 1 charger port makes swapping out batteries more important and having to take breaks to charge the batteries is a little annoying. XDT13Z This is the workhorse for me doing any driving and screwing things in. It has multiple speed and is the most important tool in the bag XPH12Z This does wonders with out stopping. Ive cut up to 4" holes with this thing with ease. XSH03Z - This cut wood and plywood with ease, I have not cut anything else using this saw so I cannot review it on other matierals but could not image that having another blade would make much of a difference. DC18RC Only bad part is it comes with a single bay charger. I would recommend this to anyone that is interested in a Makita kit. This is a brushless line at a brushed price.
Was this helpful?
Let me say that I have many Makita Products and not a single one ever let me down. This saw was t...
Quality :
Value :
Let me say that I have many Makita Products and not a single one ever let me down. This saw was the first Makita product I returned because the saw is way under powered. I bought the saw because i needed a saw without cable and small enough to get in tide spaces to cut nails on pallets. I put a 5 amp battery on the saw from my Makita circular saw and the battery was good but the saw even if I used a high quality blade never made it to the nails in the pallets. The saw also gets really hot to a point were I was not able to hold it anymore. If you cut some PVC pipe or copper pipes this saw will fit you but not if you try to take some wood apart. You will need a cable driven saw or the larger battery Makita Reciprocating saw.
Was this helpful?
Review this Product
Share your thoughts with other customers