French Oak Belmont 1/2 in. Thick x 7 1/2 in. Wide x Varying Length Engineered Hardwood Flooring (23.32 sq. ft./case)

For all trims/moldings such as quarter round, Multi purpose reducer, T-Mold and Stair Nose these are supplied by Roppe corporation and will be online by end of April. The model # for the 1/2" sunset cliffs 78" Length Stairnose is HSN0490. If you need further assistance, please try the Malibu Wide Plank Customer Service Department at 650-416-7300.

For all trims/moldings such as quarter round, Multi purpose reducer, T-Mold and Stair Nose these are supplied by Roppe corporation and will be online by end of April. All will be 78" Length

French Oak Delano 1/2" Thick x 7.5" wide x Lengths to 74.8", is a tongue & Groove construction, primary method of installation is full spread glue down, or staple down, and can also be floated. Please refer to the detailed installation instructions located on each product listing page under "Info & Guides". For further assistance please call our Home Depot Technical Services department @ 800-928-6168

A new Molding Supplier "Roppe" is in process of onboarding all Malibu Wide Plank Hardwood Coordinating moldings (Quarter Round, Reducer, T-Mold, Stair Nose) that will be available for purchase online or in store Special Order by the end of March 2021. An alternative would be to purchase UNFINISHED White Oak Moldings, take a medium tone (light, medium, dark planks choose the middle color range) flooring plank to develop a custom stain that will coordinate with the flooring, then stain and finish the moldings as needed. If you need further assistance, please try the Malibu Wide Plank Customer Service Department at 650-416-7300.

The French Oak Roosevelt 1/2" x 7.5" wide Sample Internet #315973333 is available now; Take Home Sample - French Oak Crown 1/2 in. Thick Engineered Hardwood Flooring - 5 in. X 7 in. URL @ https://www.homedepot.com/p/Malibu-Wide-Plank-Take-Home-Sample-French-Oak-Crown-1-2-in-Thick-Engineered-Hardwood-Flooring-5-in-X-7-in-HM-848647/315973333?keyword=315973333&semanticToken=300300r01122100000_202103081515472193415176072_us-east4-lwqt+300300r01122100000+%3E++cnn%3A%7B0%3A0%7D+cnp%3A%7B10%3A0%7D+cnd%3A%7B4%3A0%7D+cne%3A%7B8%3A0%7D+cns%3A%7B5%3A0%7D+cnx%3A%7B3%3A0%7D+cnq%3A%7B0%3A0%7D+cnw%3A%7B0%3A0%7D+cnv%3A%7B0%3A0%7D+st%3A%7B315973333%7D%3Ast+oos%3A%7B0%3A1%7D+tgr%3A%7BNo+stage+info%7D+smf%3A%7Bca%2Cbr%2Cfe%2Ccu%2Cpo%7D%3Asmf+nf%3A%7B1%7D%3Anf+qu%3A%7B315973333%7D%3Aqu

A new Molding Supplier "Roppe" is in process of onboarding all Malibu Wide Plank Hardwood Coordinating moldings (Quarter Round, Reducer, T-Mold, Stair Nose) that will be available for purchase online or in store Special Order by the end of March 2021. An alternative would be to purchase UNFINISHED White Oak Moldings, take a medium tone (light, medium, dark planks choose the middle color range) flooring plank to develop a custom stain that will coordinate with the flooring, then stain and finish the moldings as needed. If you need further assistance, please try the Malibu Wide Plank Customer Service Department at 650-416-7300.

RADIANT HEAT: Yes, please follow the guidelines in the Installation Guide attached to each product listing page under Info & Guides. Radiant Heat Systems • The radiant heat system must have been tested and in operation for a few weeks prior to installation. • The radiant heating system needs to be turned off prior to installation and the floor needs to be close to room temperature 65 to 75 degrees. If the radiant heat pipes are visible or exposed in the subfloor, you must cover them with 3/8” plywood to spread heat more evenly. • After the flooring is installed, slowly raise the temperature to the preferred comfort level (over at least a 5 day timeframe) beginning two days after installation or at the onset of colder weather conditions. • The radiant heat system must be controlled and the surface temperature of the flooring must never be allowed to exceed 85°F. • Proper relative humidity must be maintained within your home at all times during the year. For best results and to minimize seasonal gaps keep indoor humidity between 30% to 50% RH. If you are in an arid part of the USA or Canada, it is especially imperative that you use a humidifying system to maintain this moisture in the air. • Forced air heating system also can dry out the air inside your house much more than you might imagine, so use of a Relative Humidity meter(Hygrometer) is recommended to ensure you know when you must use a humidifier to keep the relative humidity above 30%. • Even when these guidelines are followed it is still possible that your flooring may experience some cracks (seasonal checking) on the plank surface and/or gapping between planks due to slight shrinkage, which are not covered by the products limited warranty.

The previous molding supplier for all Malibu Wide Plank Moldings is no longer doing business with the Home Depot, and a new Molding Supplier "Roppe" is in process of onboarding all Malibu Wide Plank Hardwood Coordinating moldings which should be online or available for Store Special Order by the end of March 2021. An alternative would be to purchase UNFINISHED White Oak Moldings, take a medium tone flooring plank to develop a custom stain that will coordinate with the flooring, then stain and finish the moldings as needed. If you need further assistance please try the Malibu Wide Plank Customer Service Department at 650-416-7300.

Yes, as long as proper subfloor leveling occurs pending on the installation type, which can be glued down or floated over the tile. This Engineered 1/2" Tongue & Groove Collection can be full spread glue down, staple, nail down or floating application. Please refer to the "Installation Guide" located as a PDF file attached to each Product listing page under "Info & Guides" and also consult your professional installer or if DIY thoroughly read the installation instructions.

Designed in the USA, produced in Malaysia.