#1 Home Improvement Retailer

Internet #

100175914

Model #

GFS36X48

Store SKU #

232887

1/2 in. x 36 in. x 48 in. Galvanized-Steel Flat Sheet - 30-Gauge Duct

$2828
Apply Now
Pay $3.28 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Ideal for small custom metal applications
  • Durable galvanized steel construction
  • Can be cut with tin snips
  • View More Details
Store
0 in stock
caret

Product Details

The Master Flow 36 in. x 48 in. Galvanized-Steel Flat Sheet can be cut to size for a tough HVAC job that requires a customized fitting. This sheet of 30-Gauge, galvanized steel has a maximum temperature rating of 390°. It can be installed with sheet metal screws.
  • Made of 30-Gauge, galvanized steel
  • Can be cut to size for a customized HVAC duct fitting
  • Install with sheet metal screws not included
  • Always seal seams with building code-approved sealant or duct tape not included
  • Maximum temperature rating of 390°F, minimum temperature rating of minus 100°F
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

59Questions
caret
Q:Has anyone personally tested this sheet metal for lead?
by|Mar 4, 2023
1 Answer
Answer This Question

A:  Very good question, I'd like to use it over wood for a small kitchen table top.

by|Mar 14, 2023
    caret
    Q:Can this be used to make a sign to go in the back of a landscape trailer?
    by|Mar 3, 2023
    1 Answer
    Answer This Question

    A:  This is designed for HVAC applications it is a made of galvanized steel. All other applications are at the discretion of the buyer. If you have any other inquiries about our Master Flow products please contact Technical Services at warrantyllbp@gaf.com

    by|Mar 5, 2023
      caret
      Q:How much does it weigh?
      by|Jan 4, 2023
      1 Answer
      Answer This Question

      A:  Approximately 4.5 lbs. If you have any other inquiries about our Master Flow products please email warrantyllbp@gaf.com

      by|Jan 12, 2023
        caret
        Q:Is this can be used on top wood workbench to protect it? What is the 1/2 inch in dimensions terms for ?
        by|Nov 23, 2022
        1 Answer
        Answer This Question

        A:  The 1/2 inch is the package dimension, this is 30 gauge metal, while it may protect the bench from stains and scratched it will dent easily. If you have any other inquiries about our Master Flow products please email warrantyllbp@gaf.com

        by|Dec 8, 2022
          1 found this answer helpful
          Showing 1-4 of 59
          caret

          Customer Reviews

          4.4 out of 5
          (100)
          • 4.4
            out of 100 reviews
          • 91%recommend this product
          Filter by:
          Showing 1-10 of 100 reviews
          the mirror quality is bad. it has changed color...
          the mirror quality is bad. it has changed color on one of the edges of the mirror
          by
          • Verified Purchase
          2 found this review helpful
          Works as great magnet board for kids. It’s cost effective, easy to hang and magnets stick to it p...
          Works as great magnet board for kids. It’s cost effective, easy to hang and magnets stick to it perfectly. Edges are sharp (as expected) so we built a boarder and put caulking all on the edges. We also framed in and hung other items on the wall (3D dinosaur frames and a felt board) but the galvanized steel is located on the bottom of the wall to the right side in the attached photo.
          by
          • Verified Purchase
          • Recommended
          5 found this review helpful
          Easy to use, cuts and bend with little effort. Worked well to add some extra cold air return duct...
          Easy to use, cuts and bend with little effort. Worked well to add some extra cold air return ducting in my older home.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          I bought this Galv-Steel Flat Sheet to make a roof for our golf cart. It fit perfectly by miracl...
          I bought this Galv-Steel Flat Sheet to make a roof for our golf cart. It fit perfectly by miracle! I only had to trim a few centimeters on one corner due to my "square" fabrication skills and welding. After I was done mounting it with self tapping screws into the roll cage I reinforced it with rubber-in-a can on the top and plastic poster board underneath. I then covered all the edges with foam pipe insulation. It looks awesome, has withstood 40 mph wind gusts, and I've received many compliments. Master Flow rocks!
          by
          • Verified Purchase
          • Recommended
          3 found this review helpful
          Wish they would have been willing to cut it for...
          Wish they would have been willing to cut it for me
          by
          Response from Master FlowMar 1, 2023
          Thank you for the review. You should be able to easily cut it with a pair of tin-snips. MasterFlow
          • Verified Purchase
          Magnetic chalkboard!...
          Magnetic chalkboard!
          by
          Response from Master FlowFeb 8, 2023
          Glad you were satisfied with your Master Flow purchase. Thanks for the feedback. MasterFlow
          • Verified Purchase
          Works great outside
          I used this for the top of my package box that is outside. Was easy to form around the frame and keeps the rain out of the inside.
          by
          Response from Master FlowDec 13, 2022
          Thank you for the feedback. Glad you were satisfied with your Master Flow purchase. MasterFlow
            • Recommended
            Used this flat sheet stock to create a door pan...
            Used this flat sheet stock to create a door pan for an exterior door. It worked wonderfully. Easy to work with a hand seamer and folding tool. I've used in other applications to fix duct work and works great for that as well. Be careful of the edges as they can be sharp.
            by
            Response from Master FlowDec 8, 2022
            Thank you for the feedback. Glad you were satisfied with your Master Flow purchase. MasterFlow
            • Verified Purchase
            It was exactly what I need to complete my project....
            It was exactly what I need to complete my project. The Description was spot on , and the product is excellent.
            by
            Response from Master FlowDec 7, 2022
            Thank you for the feedback. Glad you were satisfied with your Master Flow purchase. MasterFlow
            • Verified Purchase
            Works good and last a long time....
            Works good and last a long time.
            by
            Response from Master FlowOct 6, 2022
            Thank you for the feedback. Glad you were satisfied with your Master Flow purchase. MasterFlow
            • Verified Purchase
            Showing 1-10 of 100 reviews

            Frequently Bought Together

            +
            +
            Price:
            $2828

            Compare Similar Metal Ducts

            Best Seller4 in. x 5 ft. Round Metal Duct Pipe
            current product
            1/2 in. x 36 in. x 48 in. Galvanized-Steel Flat Sheet - 30-Gauge Duct
            16 in. x 8 in. x 4 ft. Half Section Rectangular Duct
            BrandMaster FlowMaster FlowMaster Flow
            Name4 in. x 5 ft. Round Metal Duct Pipe1/2 in. x 36 in. x 48 in. Galvanized-Steel Flat Sheet - 30-Gauge Duct16 in. x 8 in. x 4 ft. Half Section Rectangular Duct
            Price
            $1598
            $2828
            $3078
            Ratings
            (413)
            (100)
            (28)
            MaterialGalvanized SteelGalvanized SteelGalvanized Steel
            View ProductView ProductView Product