36 in. x 11 in. Espresso Plastic Window Box

The screws supplied with our window boxes are only intended for mounting into wood/siding. When installing your window box to brick or concrete walls, masonry hardware/tapcons are recommended which do need to be purchased separately. You will need to pre-drill holes into the brick or concrete where the brackets will be placed. Then, once the holes are pre-drilled, you can drill the brackets into place. After securing the brackets, slide your window box into place.

We apologize for the delay in availability of this item. We have experienced an extremely high demand for our products this spring and are working hard to make new inventory available as quickly as possible. Please sign up for Home Depot's "Back in Stock" notifications to be alerted when this this item is back in stock.

We do not recommend painting our products. Our products are manufactured from polyethylene, which is an oil based plastic. We have found that paint typically does not adhere to it very well and tends to peel and flake off over time. That being said, there is a paint on the market that is called “Fusion for Plastic” made by Krylon, which some of our customers have used with success. Please be advised that painted products cannot be returned and that painting the product will also void the 15 year warranty that we are able to offer on any fading or discoloration of the product.

Hello Jamie, The screws supplied with our window boxes are only intended for mounting into wood/siding. For mounting into Brick or concrete we advise the use of masonry hardware/tapcons which do need to be purchased separately.

Use Tapcon. 1.5-2 inch. The bit usually comes with the screws. If you drill into brick you will need a hammer drill. Rent it if need be. It’s a must

There are brackets supplied that you attach to your home first, then attach boxes.

Yes, I put mine on the porch looks great.

We do not recommend painting your planter. Our products are manufactured from polyethylene, which is an oil based plastic. We have found that paint typically does not adhere to it very well; it tends to peel and flake off over time. There is a paint on the market that is called “Fusion for Plastic” made by Krylon, which some of our customers have used with success. If you do choose to paint your planter, we recommend testing on a small unvisible portion before painting the entire product. Please be advised that painted products cannot be returned and that painting the product will also void the warranty.

Hi there! Once water starts seeping out of the overflow drain hole the reservoir is full. Always make sure there is a clean passage way out of the drainage hole to ensure water can escape. The Overflow drain hole is manufactured/pre-drilled in all of our window boxes and Patio Planters.

The specific dimensions, inside and out, are found on Home Depot's website, or Mayne's website.