Maybe, if you're using self tapping screws, if you can find them long enough. If installing on fiberglass stall you will need a drill to drill thru fiberglass or you could risk cracking, and use small bit and drill first, then use larger bit, (a hair bigger than screws), or you could still crack it!! If sheetrock, you will need to find the studs with a stud finder, so the screws can bite in to the wood, if not you will bust your A-- because sheetrock itself will not hold when you pull on handle!! They (screws), will pull out leaving big ugly holes!! Hope this helps Craig
The distance between mounting holes is 25.5 inches.
The screw plates well rust in shower.
Yes. You or your handyman will need a special drill/screw bit.
Yes, see website.