|Approximate Tile Size||8x8||Product Length (in.)||7.75 in|
|Product Thickness (mm)||6 mm||Product Width (in.)||7.75 in|
|Suggested Grout Line Size||1/8|
|Application Location||Backsplash, Floor, Wall||Break Strength (lb.)||250 lb|
|Color Family||White||Color/Finish||Vertex / Low Sheen|
|Commercial / Residential||Residential||DCOF Rating||Greater than or equal to 0.42|
|Edge Type||Pressed||Flooring Look||Concrete Look|
|Flooring Product Type||Ceramic Tile||Indoor/Outdoor||Indoor, Outdoor|
|Installation Method||Mortar||Location||Bathroom, Fireplace, Kitchen, Patio, Shower|
|Minimum Acclimation Period||No Acclimation Required||Returnable||90-Day|
|Style||Mid-Century, Modern||Tile Features||Chemical Resistant, Frost Resistant, Radiant/Underfloor Warming Heating|
|Tile Finish||Matte||Tile Format||Standard|
|Tile Material||Ceramic||Water Protection||Water Resistant|
A: HI Kabin! Thank you for your question! Please reach out to our Customer Service Team at 800-963-7652 and we will be happy to assist you with ordering. Have a great day!- Stephanie C
A: Hello Dylan, Thank you for your interest in our Twenties Vertex Encaustic. This ceramic floor and wall tile is sold by the case. There are 25 tiles per case, and each case covers 10.75 square feet. Please see the link below to purchase this product by case. Thank you! https://www.homedepot.com/p/Merola-Tile-Twenties-Vertex-Encaustic-7-3-4-in-x-7-3-4-in-Ceramic-Floor-and-Wall-Tile-10-75-sq-ft-Case-FRC8TWEV/321300832 For more information about this product, please contact our Customer Service Department at 800-963-7652. Thank you!
A: This is a glazed tile. So, it doesn't need a sealer. If you are referring to grout, it would depend on the width of the grout joint. I used a premium rapid-setting grout with aggregate. As far as caulk/sealant, see if the grout manufacturer makes one to match the grout. Happy Tiling!
A: Hi! Sealing our Twenties Vertex is not required. This product has a glazed surface that is easy to maintain, thus choosing to seal this tile is a matter of personal preference. However, it is important to note that while glazed tile does not need to be sealed, the grout may need to be depending on your installation. We recommend referring to the manufacturer instructions for the grout you chose. If you have any further questions, please give us a call at (800)-963-7652.
A: even though this is a low sheen it is still just a ceramic tile which does not need to be sealed - ever. You need to seal the grout and for that I can say from experience that the more you spend the less often you have to seal the grout. Tile Labs most expensive one at HomeDepot is good and will last a few years (3) depending on traffic and cleaning.
A: Hi, Zelda! It would depend on the size of your shower and the location of your drain. According to the TCNA, your floor needs to be sloped ¼” per foot. If you have any further questions, please give us a call at (800)-963-7652.
A: No, these tiles are beautiful for the floor or walls. I think if you place them on the bottom of the shower would be to dark. They are smooth but no slippery.