#1 Home Improvement Retailer

Internet #205228280

Model #M-MBSJP24HK8

Store SKU #1001079374

24 in. Adjustable Scaffold Leveling Jacks in Galvanized Steel with Heavy Duty Base Plate and Wing Nut Screw (8-Pack)

$21999
Apply Now
Pay $194.99 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Easy to adjust over 18 in. range with wing nut screw
  • Works with both standard and arched frames
  • Helps level frames on uneven ground
Store
0 in stock
Text to Me
caret

Product Details

The MetalTech 24 in. Hollow Leveling Jacks (8-Pack) are built to last with galvanized steel for maximum corrosion resistance. These leveling jacks can be adjusted over 18 in. with both standard and arched frames. Each jack is supported by a heavy-duty, welded-on base plate for durability and features a super tough wing nut screw for easy adjustment.
  • Adjustable over 18 in. range when used with standard or arched frames
  • Adjustable leveling jacks are particularly useful for uneven ground, especially along an external wall
  • Galvanized for corrosion resistance and longevity
  • Meets ANSI, CSA and OSHA requirements for safety
  • Return Policy
caret

Specifications

caret

Questions & Answers

64Questions
caret
Q:Can you use these on stairs with scaffolding?
by|Oct 15, 2022
4 Answers
Answer This Question

A:  Yes!

by|Oct 19, 2022

    A:  Good day, Unfortunately not because the product must be equal

    by|Oct 17, 2022

      A:  Yes 

      by|Oct 18, 2022

        A:  Yes, just make sure you leave room for the screwjack part can turn. Also keep in mind that you can change the height even with scaffolding and planks weight is on. If you're worried about damaging stairs surface just put a nice piece of 2X10 under the jacks.

        by|Oct 25, 2022
          1 found this answer helpful
          caret
          Q:What is the weight rating on these?
          by|Jun 26, 2022
          1 Answer
          Answer This Question

          A:  Good day, the CAPACITY WITH A SAFETY FACTOR OF 4:1 is 3125 KG ( 6875 LBS). Thank you

          by|Oct 25, 2022
            1 found this answer helpful
            caret
            Q:Will these fit tractor supply scaffolding?
            by|Mar 21, 2022
            1 Answer
            Answer This Question

            A:  Others posted in reviews that it fit their square leg scaffolding. The Tractor supply type is basically the same as any bakers scaffold with 1 1/2” leg. So these feet should fit.

            by|Jul 27, 2022
            caret
            Q:Will these fit MetalTech Saferstack 6.4 ft. x 5 ft. Mason Scaffold Frame (2-Pack)?
            by|Nov 8, 2021
            2 Answers
            Answer This Question

            A:  No because Home Depot can’t get my scaffolding delivered to the store for some reason.

            by|Jan 18, 2022

            A:  Hello Charlie, yes these levelling jacks will fit the 6.4ft x5 ft mason scaffold frame

            by|Nov 9, 2021
              Showing 1-4 of 64
              caret

              Customer Reviews

              4.6 out of 5
              (448)
              • 4.6
                out of 448 reviews
              • 94%recommend this product
              Filter by:
              Showing 1-10 of 448 reviews
              Medium duty adjustable legs
              Screw adjustale scaffold feet work as they should. I am not sure how well they would hold up to commercial use.
              by
              • Verified Purchase
              • Recommended
              Indispensable
              I bought these to use with the MetalTech yellow Baker style Safeclimb scaffolding so I could use the scaffolding outdoors around the house without buying additional outdoor scaffolding. I relied on these to keep my two story scaffolding tower level, even on the back concrete porch which was not exactly level. To make them work better, I spent an hour grinding off the stops and filing the same threads so I could remove and reverse the leveling handles to give better support to the scaffolding legs. The stops also kept the leveling jacks from fitting easily inside the scaffolding legs, so I gained two benefits doing this. I painted a bright orange band just below the removed stops to remind myself not to support the scaffolding higher than the removed stops. Because the leveling jacks are 24 inches tall, you cannot pin both holes of the outriggers to the scaffolding. To manage this, I pinned the top outrigger hole at the first available hole of the scaffolding, and used a clamp to secure the bottom of the outrigger near its lower hole. There are just too many places not level around the outside walls of a house to not be using leveling jacks with scaffolding! I would not buy shorter leveling jacks because it was too easy to find myself using all of the safe height of the 24 inch leveling jacks. I would also not use the leveling jacks that allow wheels under them if you are ever stacking scaffolding above 6 feet. If you need leveling jacks with stacked scaffolding, you should not be rolling or even tempting yourself to roll scaffolding around that kind of ground. The scaffolding sets up to two towers in 20 minutes and breaks down in 10 minutes, including safety rails, single handed. It's 30 minutes to move the tower, but that's better than tipping over a two story tower. If I wanted to move a single story tower I could remove the safety rail and floor and secure the leveling jacks with bungee cords and lift the entire tower from the center and walk it to a new location. It saves a few minutes if you don't mind walking maybe 90 pounds. I was grateful these were the hollow leg leveling jacks! I lifted one end of a tower without the floor in it and inserted both leveling jacks and lowered the tower end onto the leveling jacks to get them in the tower legs. Another way was to put a single stack tower on its side, insert and secure the leveling jacks with bungee cords and stand the tower back up. I attached outriggers with leveling jacks already in them. I gave these 4 stars instead of 5 because they really needed the handles reversed and stops removed to fit well and give good support to the yellow indoor MetalTech scaffolding.
              by
              • Verified Purchase
              The function of this brand of leveling jack works as it should. The quality seems to be fine and ...
              The function of this brand of leveling jack works as it should. The quality seems to be fine and long-lasting. The only difference between this brand and the ones I already had in my inventory, is this brand has a hollow shaft. Should not be an issue.
              by
              • Verified Purchase
              • Recommended
              These leg jacks made my MetalTech 6 ft scaffold much more versatile. MetalTech doesn't recommend...
              These leg jacks made my MetalTech 6 ft scaffold much more versatile. MetalTech doesn't recommend these tall jacks for the shorter scaffold, but they fit into the legs perfectly. The scaffold is much more stable than with the casters plus the jack legs can be fastened to a 2x board or boards to use on softer ground or carpeted floor as well as giving a wider footprint for stability. I purchased some washers with 1 3/8 ID to put between the bottom of the scaffold legs and the adjusting screw that made leveling a lot easier; to keep the screw from turning, I used a bungee cord to the lowest rung of the scaffold. The bungee also keeps the jacks in the frame while picking up and moving the scaffold.
              by
              • DIY
              • Verified Purchase
              • Recommended
              3 found this review helpful
              This is a must have item if using the scaffold...
              This is a must have item if using the scaffold on unleveled surfaces.
              by
              • Verified Purchase
              1 found this review helpful
              These worked well, use 1,2,3, or all 4, depending on your situation. Heavy duty, great height adj...
              These worked well, use 1,2,3, or all 4, depending on your situation. Heavy duty, great height adjustment range. The only reason why I rated 4 stars, is due to the inability to lock/secure in legs. When you need to move the scaffolding, the jacks fall out/drag.
              by
              • DIY
              • Verified Purchase
              • Recommended
              3 found this review helpful
              great product
              Came as ordered no problems. Fit my baker scaffolding perfect.
              by
                • Recommended
                1 found this review helpful
                Worked well.
                Worked well.
                by
                • Verified Purchase
                • Recommended
                I don't know why some people are complaining about them being hollow, they're plenty strong enoug...
                I don't know why some people are complaining about them being hollow, they're plenty strong enough for their intended use. Solid ones would be much heavier and much more expensive. My complaint is the threads are rolled, and during that process, some of them were bowed slightly. The manufacturer could have easily straightened them in a press, as I'm going to have to do, but they sent them out with a bend in them. Some people have complained they didn't fit their scaffolding, which may be because they're slightly bent. They fit the square tubes in my Home Depot Pro series scaffold, as well as my older Harbor Freight scaffold, but there isn't a lot of clearance. I found that during the process of leveling my scaffold with outriggers, some of them became very tight in the square tubes, and were difficult to adjust. A little grease may help that... or not. I've also used these with a section of pipe to jack up a ceiling when replacing a header in a load-bearing wall. They worked quite well for this application.
                by
                • Pro
                • Recommended
                6 found this review helpful
                The product works as intended. I needed these to do some work about 1½ stories up on uneven grou...
                The product works as intended. I needed these to do some work about 1½ stories up on uneven ground using my scaffolding set. Much less work than trying to shore up with cribbing and safer too!
                by
                • Verified Purchase
                • Recommended
                Showing 1-10 of 448 reviews

                Frequently Bought Together

                +
                +
                Price:
                $21999