for hole 0.5 inch
the hole to hole measurement is 84 inch.
hi, in response to your question, the cross braces can be purchased also in the 10 ft length, Metaltech part # M-MC48120
Yes. If you set the vertical uprights seven feet apart and the connection pins measure four feet between theses will work. These cross braces actually are about 97” long when folded flat.
When laid flat on the floor, the overall length is 98 3/4". The 4' measurement refers to the distance between the bottom brace lock and the top brace lock on a scaffold frame. The 7' measurement refers to the distance between two scaffold frames after they are set up with these cross braces.
Yes, it collapses flat, bolted through the middle of each element.
There are actually 16 braces, but each pair of 2 are connected in the center with a rivet making 8 pairs. It takes two pair to form a section of scaffolding. This 8 pack (pairs) will allow you to set 4 sections of scaffolding.
7ft.x4ft. cross bars
The locks for the cross braces are on the scaffold ends.