#1 Home Improvement Retailer

DrillMate Portable Drill Guide for 43mm Diameter Collar Drills - Multi-Angle Drilling Guide with Self-Centering Base

$2699
  • Portable drill guide increases accuracy of 43mm collar drills
  • Optimal control and precise centering and depth every time
  • Adjusts to 90°, 75°, 60° and 45° for angled drilling
  • View More Details
How to Get It

Frequently Bought Together

++
Price:
$2699

Product Overview

DOES NOT WORK WITH MOST CORDLESS DRILLS.With the 1368 DrillMate, from Milescraft, you can drill centered, straight or angled holes on the face and edge of a board or even centered on round stock. The special design is tailored for corded drills with a 43mm collar. The all-metal construction of the DrillMate provides the precision of a drill press with the ease and portability of a hand drill.
  • DOES NOT WORK WITH MOST CORDLESS DRILLS
  • Metal guide head unit accepts drills with 43mm collar for attachments
  • Angle readout for setting drilling angles to 45°, 60°, 75° and 90°
  • Included stop collar allows you to set depth for drilling multiple holes at exactly the same depth
  • Control decent spring helps you carefully lower drill bit for precise placement
  • Self-centering base accommodates materials up to 2 - ¼" thick
  • V-Groove on top of base allows for placement and centering of round stock
  • Non-slip TPE feet, prevents slipping and marring on the work surface
  • Auxiliary handle allows for more control
  • California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Workbench Accessories

Miter Saw Crown Stops
current product
DrillMate Portable Drill Guide for 43mm Diameter Collar Drills - Multi-Angle Drilling Guide with Self-Centering Base
1-1/4 8 Teeth per inch Thread Chuck Insert/AdaptorHand Wheel for DVR XP and 1624-24 Wood Lathes
BrandDEWALTMilescraftNOVANOVA
NameMiter Saw Crown StopsDrillMate Portable Drill Guide for 43mm Diameter Collar Drills - Multi-Angle Drilling Guide with Self-Centering Base1-1/4 8 Teeth per inch Thread Chuck Insert/AdaptorHand Wheel for DVR XP and 1624-24 Wood Lathes
Price
$2207
$2699
$2782
$3678
Ratings
(413)
(29)
(17)
(13)
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)2 inProduct Height (in.)17 in
Product Width (in.)7.25 in

Details

Bench & Stationary Tool TypeAccessoryIdeally Used WithPower Drills
Product Weight (lb.)3.56 lbReturnable90-Day
Tools Product TypePower Tool

Warranty / Certifications

Manufacturer Warranty36 mo

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3.4
    out of 29 reviews
  • 89%recommend this product
Filter by:
Showing 1-10 of 29 reviews
Not necessary, but a nice to have
First of all, please note, this drill will only work with some european drills. With that said, the only one I found was the Bosch corded drill which you can find here in the US cheap (but they may be discontinued soon and the new Bosch drills will not fit). I decided to go with this version rather the one with a attached drill vise which seemed too shaky by attaching any drill onto the unit. By getting the Bosch, the assembly was more secure and more accurate. I was drilling a number of dog holes for an assembly table i was making and it does make drilling 90 degree holes easier. And drilling 200 holes and trying to get them all perfect by hand is challenging. So, this helped out alot. You still need to use some care and don't expect it to make the holes automatically, but its a good tool if used correctly.
by
    • Recommended
    1 found this review helpful
    I used it with a hammerdril and a jig I made. After 176 stones that needed a hole drilled into i...
    I used it with a hammerdril and a jig I made. After 176 stones that needed a hole drilled into it still going strong. I still have over 300 more stones to do, I'll let you know it does after that. I would think about taping plate behind the retaining cover for the drill. I had to super glue the Nut behind the back plate because the vibration was loosing them up.
    by
    • Verified Purchase
    • Recommended
    4 found this review helpful
    The product is somewhat difficult to use. It requires additional...
    The product is somewhat difficult to use. It requires additional clamps to hold the fixture, the work and anything else you'll use. Those clamps may prohibit the effectiveness of using the fixture. I wouldn't recommend this as a buy.
    by
    • Verified Purchase
    came in very useful.
    was able to reuse an old tool again, my Milwaukee heavy-duty hammer drill. fit prefect on the my new tool.
    by
      • Recommended
      Awesome
      Is a very good product
      by
      • Verified Purchase
      • Recommended
      Incompatible with both my drills....
      Incompatible with both my drills.
      by
        Requires a drill type that can be locked into the...
        Requires a drill type that can be locked into the slider.
        by
          Rating provided by a verified purchaser...
          Rating provided by a verified purchaser
          by
          • Verified Purchase
          Great product easy to use.
          Great product easy to use.
          by
          • Verified Purchase
          • Recommended
          The drillmate was easy to assemble. I have only used...
          The drillmate was easy to assemble. I have only used it a few times at this point. The Drillmate seems to be a bit stiff in its operation. With my drill attached the movement of sliding the drill & bit down & up the rails is not very smooth. Other than that I love it & expect it will work better every time I use it.
          by
          • Verified Purchase
          Showing 1-10 of 29 reviews