The teeth vary on the blade to give it a broader effective range. Every so many teeth is a larger tooth. It performs similar to both a 14 and an 18 tooth blade. Should be a description on the Milwaukee website.
Junk! Harbor freight sells a better blade.
Hi Derek! The lower TPI on a blade is the faster the blade will cut through the material. The higher the TPI on the blade the slower it will cut through a material. The higher TPI will result in a cleaner cut.
It is a combination blade so it will cut a variety of materials. There is a set of teeth alternately spaced at 10 TPI and then a set spaced at 14 TPI. Has been a quality blade cutting both steel rod and aluminum.
Yes, I bought these band saw blades they work great !
The blade is 1/2" wide and .020 thick.
it will cut it and will run hot because there is not enough space between the teeth, may work better with a 14/18TPI
Not sure the needed size but Most Craftsman tool require craftsman parts/consumables blades included (they usually use odd ball sizes only available from them)
I thought they did