![]() | ![]() | ![]() | |
Brand | DEWALT | Milwaukee | DEWALT |
Name | 20-Volt MAX Inflator (Tool-Only) | M12 12-Volt Lithium-Ion Cordless Compact Inflator Kit W/ 4.0Ah Battery & Charger | 20-Volt MAX Inflator with Bonus Lithium Ion Battery Pack 3.0 Ah and Charger |
Price | $10400 | $17900 | $22800 |
Ratings | (744) | (1495) | (1120) |
Maximum Pressure (psi) | 160 | 120 | 160 |
Included | Air Hose,Ball Needle,Valve Adaptor | Accessories,Ball Needle | AC/DC Adapter,Accessories,Hose,Valve Adaptor |
Compressor/Air Tool Features | Light | Automatic Shut-off,Cordless Operation,Digital Pressure Gauge | Automatic Start/Stop,Cordless Operation,Digital Pressure Gauge,Handle,Light,On-Unit Display |
Power Type | Cordless Electric | Cordless Electric | Cordless Electric |
Voltage (v) | 20v | 12v | 20v |
Battery/Charger | Tool Only | (1) 4 Ah Battery & Charger Included | (1) 3 Ah Battery & Charger Included |
Application Use | Inflation | Inflation | Inflation |
View Product | View Product | View Product |
![]() | ![]() | ![]() | |
Brand | DEWALT | Milwaukee | DEWALT |
Name | 20-Volt MAX Inflator (Tool-Only) | M12 12-Volt Lithium-Ion Cordless Compact Inflator Kit W/ 4.0Ah Battery & Charger | 20-Volt MAX Inflator with Bonus Lithium Ion Battery Pack 3.0 Ah and Charger |
Price | $10400 | $17900 | $22800 |
Ratings | (744) | (1495) | (1120) |
Maximum Pressure (psi) | |||
Included | |||
Compressor/Air Tool Features | |||
Power Type | |||
Voltage (v) | |||
Battery/Charger | |||
Application Use | |||
View Product | View Product | View Product |
Hi, can this do low pressure also? like around 13lbs
The included instructions say not to rely on the pressure settings if using any of the adaptors. My experience is that is good advice as it is inaccurate with the Presta adaptor. For such low pressure I would go by feel
I work in the automotive industry and over inflated tires come into the shop all the time, a quick and easy trick is to just take a pen into the nozzle and it will allow air to escape with no damage done (use a click pen with the tip not out)
The one I just received on the $99 special came with a 2.0 battery but it is not the one in the picture as advertised. The battery I got doesn't indicate its level of charge like the one in the picture. This is false advertising.
yes, it should fit. I have used the 2 and 4ah with room to spare. Even if it stuck out the bottom it would not really be a problem
First question I have is why? If after connecting all your fittings properly, turn on the gas and perform a leak test on every joint with a soapy solution...bubbles will form where leaks are, if not (no bubbles) you're good to go. Pressure test (inside out)...too many safety issues if not properly protected from bursting pipes/connections and as little as 5 to 10 psi can be harmful...30 psi through a pin hole can penetrate/lacerate skin...fyi. A vacuum test (outside in) would be recommended instead...less than 500 microns for 5 minutes. Hope this helps...Malama Pono
I went 75 and drain battery
No
1psi at a time
This one is "tool only" no batteries included. Any m12 battery will work, there are kits that come with batteries.