![]() | ![]() | ![]() | ![]() | |
Brand | Milwaukee | Milwaukee | Milwaukee | Milwaukee |
Name | M12 12-Volt Lithium-Ion Force Logic Cordless Press Tool Kit (3 Jaws Included) with Free M12 Copper Tubing Cutter Kit | M12 12-Volt Lithium-Ion Force Logic Cordless Press Tool Kit with M12 Bandsaw | M18 Force Logic 2-1/2 in. - 4 in. Press Ring Kit Set (4 Jaws Included) | M18 Press Tool 1/2 in. - 2 in. Black Iron Press Tool Jaw Set For Viega MegaPress Fittings |
Price | $201800 | $209900 | $249900 | $279900 |
Ratings | (227) | (328) | (3) | (3) |
Compatible Pipe Material | Copper | Multi-Purpose | Copper | Black Pipe |
Compatible Pipe Size (in.) | 1 in.,1-1/4 in.,1/2 in.,3/4 in. | 1 in.,1-1/4 in.,1/2 in.,3/4 in. | 1 in.,2 in.,3 in.,4 in. | 1 in.,1-1/2 in.,1-1/4 in.,1/2 in.,2 in.,3/4 in. |
Power Type | Battery | Battery | Battery | Battery |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | Milwaukee | Milwaukee | Milwaukee | Milwaukee |
Name | M12 12-Volt Lithium-Ion Force Logic Cordless Press Tool Kit (3 Jaws Included) with Free M12 Copper Tubing Cutter Kit | M12 12-Volt Lithium-Ion Force Logic Cordless Press Tool Kit with M12 Bandsaw | M18 Force Logic 2-1/2 in. - 4 in. Press Ring Kit Set (4 Jaws Included) | M18 Press Tool 1/2 in. - 2 in. Black Iron Press Tool Jaw Set For Viega MegaPress Fittings |
Price | $201800 | $209900 | $249900 | $279900 |
Ratings | (227) | (328) | (3) | (3) |
Compatible Pipe Material | ||||
Compatible Pipe Size (in.) | ||||
Power Type | ||||
View Product | View Product | View Product | View Product |
Yes, but if you are doing a lot of it, I recommend the 18v saw.
Depends on what you mean by a flush cut and depends on the size of the material. Also if you take off the shoe on the saw it will help an allow you to get closer to a so called flush cut. Like I have taken the shoe off and was able to cut 2 inch pvc conduit the was coming up through the bottom plate and running along the wall. I had to pull the conduit away from the wall just a little bit mainly so the saw could rotate and cut the conduit. Now will the blade cut flush up against the wall if you like pushed it as if you were cutting towards the wall no but it will get close and most of the time if you can pull say the conduit away from the wall just a little the saw can cut it.
Tool only does come with a blade. Now the blade is not installed just like none of the bandsaws come with blades installed but it does come in the box
Never seen a hard case for the m12 bandsaw before and normally just throw the saw in a tool box. Now on the deep cut bandsaw I wanted a case for it and I had an old Bauer deep cut bandsaw case (from horrible freight) and wouldn’t you know the Milwaukee m18 fuel deep cut fits right in like a glove.
Yes of course it will what do you get about cut capacity? Or did you not even both to read specs on it? It will cut anything that fits inside the opening. Even the bigger 1-5/8 unistrut. It’s a freakin hand held bandsaw for crying out loud. Just watch your fingers it will cut them off too just very painfully since it’s a lot slower then say a circular saw. You will feel Your finger being cut off and stop the saw unlike with a Circular saw your finger is off before you even blink and you grabbing your finger squeezing it to stop the blood and then you say ouch once you realize what happen. Now if I had to make a ton of cuts in 1 inch angle iron on a regular the. I would suggest getting the compact model or better yet the new fuel compact version. Don’t get me Wrong the m12 will cut it no problem and all day long with tons of control while cutting. But the m18 fuel Compact with just make the cuts faster and more cuts per battery.
Yes, I bought mine at the local Home Depot.
1/2” 3/4” 1”
The press tool set that I got came with a 12v tool, 3 jaws (1/2", 3/4" and 1"), 2 batteries, charger, case, and a 12v pipe cutter
No the Tool-Only has no charger included.
M18 model ONLY have a brushless motor.