#1 Home Improvement Retailer

Internet #314329358

Model #2779-750A-2997-22

M18 18V Lithium-Ion Cordless FORCE LOGIC 750 MCM Crimper Kit with EXACT #6 750 MCM Al Dies and M18 FUEL Combo Kit

Apply Now
$undefined.00 /mo* suggested payments with months* financingApply Now
  • Includes 2 Tools: M18 FUEL Hammer Drill & Impact Driver
  • 350° head rotation design for easy access to tight spaces
  • Part of the M18 System, featuring over 200+ tools
  • View More Details
How to Get It

Product Overview

The M18 FORCE LOGIC 750 MCM Crimper is the Easiest Way to Crimp, producing cULus classified crimps according to the UL 486A-B classification standards for #8 - 750 MCM Cu and Dual Rated Anderson, Blackburn Burndy, Ilsco, Panduit, Penn-Union and Thomas and Betts Connectors. In addition, every EXACT 12T U-Style Die features vivid industry standard colors to indicate wire size and center alignment markings for easiest die selection and die alignment. All dies also eliminate cross-referencing by imprinting the wire size onto completed connectors and are the only dies that are 100% serialized and measured for greatest accuracy and easiest inspection. Engineered to reduce weight and improve balance, the M18 FORCE LOGIC 750 MCM Crimper is up to 3 lbs. lighter, fully balanced, with a 350 rotating head and red alignment marks making it the Lightest, Most Balanced and Easiest Crimper to Align. Predictive Force Monitoring constantly measures force output to deliver consistent speed that won't bog down on larger connectors while delivering accurate pressure every time. The only tool that provides instant pressure verification with a green indicator. The only tool that has pre-crimp battery check that automatically ensures enough battery charge to complete each crimp. Also includes (1) 2997-20 M18 FUEL Hammer Drill and Impact Driver Combo Kit (2-Tool) with Two 5Ah Batteries.
  • Bold alignment marks aid accuracy in crimp placement
  • PFM (Predictive Force Monitoring) provides instant pressure verification with green light indicator
  • Pre-crimp battery check automatically ensures enough charge to complete each crimp
  • 350 head rotation provides easy access in tight spaces
  • Tool records and stores every crimp made for professional report building through ONE-KEY
  • Longer-life with POWERSTATE brushless motor and weather protected electronics that keep dirt, dust and moisture out
  • Fully compatible with the M18 system, featuring over 200 plus tools
  • 2997-22: 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque
  • 2997-22: 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications
  • 5-year tool and 3-year battery warranty
  • Includes: 1 M18 force logic 750 MCM crimper (2779-20), 1 M18 REDLITHIUM XC 5.0 battery (48-11-1850), 1 REDLITHIUM CP 2.0 battery (48-11-1820), 1 M18 and M12 multi-voltage charger (48-59-1812), 1 carrying case with slots for dies (42-55-2778), 1 EXACT #6 aluminum U style die (49-12-U006), 1 EXACT #4 aluminum U style die (49-12-U004), 1 EXACT #2 aluminum U style die (49-12-U002), 1 EXACT #1 aluminum U style die (49-12-U001), 1 EXACT 1/0 aluminum U style die (49-12-U01A), 1 EXACT 2/0
  • 2997-22 includes: 1 M18 FUEL 1/2 in. hammer drill (2804-20), 1 M18 FUEL 1/4 in. hex impact driver (2853-20), 2 M18 REDLITHIUM XC5.0 battery, 1 M18 and M12 multi-voltage charger, 1 side handle, 2 belt clip, 2 bit holder, 1 carrying case
  • Kit includes: one 2779-750A M18 18-Volt lithium-ion cordless FORCE LOGIC 750 MCM crimper kit with EXACT #6 750 MCM Al Dies and one 2997-22 M18 FUEL 18-Volt lithium-ion brushless cordless hammer drill and impact driver combo kit
  • Shop All Milwaukee Products
  • Click here for more information on Electronic Recycling Programs

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Power Crimpers

current product
Top RatedM18 18V Lithium-Ion Cordless FORCE LOGIC 750 MCM Crimper Kit with EXACT #6 750 MCM Al Dies and M18 FUEL Combo Kit
M18 18V Lithium-Ion Cordless FORCE LOGIC 750 MCM Crimper Kit with EXACT #6 750 MCM Al DiesM18 18V 15-Ton Lithium-Ion Cordless FORCE LOGIC Utility Crimper with 2-Batteries, Charger Tool Bag
NameM18 18V Lithium-Ion Cordless FORCE LOGIC 750 MCM Crimper Kit with EXACT #6 750 MCM Al Dies and M18 FUEL Combo KitM18 18V Lithium-Ion Cordless FORCE LOGIC 750 MCM Crimper Kit with EXACT #6 750 MCM Al DiesM18 18V 15-Ton Lithium-Ion Cordless FORCE LOGIC Utility Crimper with 2-Batteries, Charger Tool Bag
View ProductView ProductView Product



Product Depth (in.)16 inProduct Height (in.)11 in
Product Width (in.)3.5 in


Batteries IncludedYesBattery Amp HoursMultiple Batteries
Battery Power TypeLithium IonBattery SizeLithium Ion
Battery/Charger4 Batteries & Charger IncludedBattery/Charger(4) Multiple Ah Batteries & Charger Included
Charger IncludedCharger IncludedColor FamilyRed
ConditionNewCordless Tool TypeSpecialty
Cordless/CordedCordlessIncludedTool Case
Motor TypeBrushlessNumber of Total Batteries Included4
Power Tool FeaturesNo Additional FeaturesProduct Weight (lb.)11.5 lb
Returnable90-DayTools Product TypePower Tool
Variable SpeedNoVoltage (volts)18 V

Warranty / Certifications

Certifications and ListingsUL ListedManufacturer Warranty5 Year Tool and 3 Year Battery

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.7
    out of 1,053 reviews
  • 83%recommend this product
Filter by:
Showing 1-10 of 1,053 reviews
Milwaukee Quality
5.0 allows for hours of work without needing to recharge. Drill works amazing and has never let me down. Impact driver is by far the most powerful I’ve ever used and makes working in the wood shop or around the house a breeze. Well thought out design.
    • Recommended
    1 found this review helpful
    Great Kit. But...
    As a Contractor, when it comes to battery powered,, I use milwaukee everything. for years I used the first generation ¼ impact and drill with the 1.5AH batteries and they never let me down. sure you swap batteries more frequently, but your second battery is already fully recharged by time your otger one dies..I recently upgraded to all FUEL brushless motor tools, and the difference is remarkable.The hard case is amust have for any real contractor. However my biggest problems with the case are 1: you basically want $120 just for the case. 2: the impact cannot be swapped for the ¼ SURGE impact. it will not fit in the case. which wastes more space in the tool trailer. and 3: milwaukee doesn't sell empty hard cases. (huge missed opportunity on their part)as for the impact and hammer drill, they're clear and obvious upgrades from the first generation. the grip is better formed than first gen. the brushless motors don't need to be "broken in" like first generation models needed to be. and the performance is fantastic.I'll carry milwaukee tools for life. Slightly because I'm so heavily invested into milwaukee batteries already, but also because the performance and reliability has never failed me.
      • Recommended
      2 found this review helpful
      The best drill and driver i habe ever used
      These are without a doubt, hands down, the best drill and drover I have ever used. I see in some reviews some folks got some faulty drills. Not the case for me. Ive had mine a couple of years and use them daily in a professional setting. The torque on the driver is unparalled. In some instances I even use it with a good bit to drill through stainless steel. And the hammer drill, an absolute monster, I drill into concrete and brick constantly and with ease. The 5 amp batteries provide plenty of life, I can get through a full work day, sometimes two on one charge.
        • Recommended
        8 found this review helpful
        Milwaukee didn't want me to post this review
        I read the reviews before purchasing, just like you are right now. I weighed the pros and cons of various brands, just like you. Listen to this review. It holds weight. I had this review on Milwaukee's website and they contacted me to tell me they wanted to get me in touch with their product manager for drills/drivers. They then took my review down (after roughly 2 days) and I never heard from them again. I then tried to repost the SAME review and the moderators took it down before it could be posted for "not following their review guidelines." For that, I'm taking my review from 2 stars down to 1. Pathetic. My original review: I originally got this combo (M18 Fuel Drill/driver and impact combo with (2) 5 Ah batteries) to replace the Makita XPH07 drill driver that had previously given me trouble with its rear bearing/motor assembly). This was around Black Friday of 2019, so Milwaukee was running their special of giving you 2 free items when you bought this kit. I chose their job site radio (I love the radio so much) and another 5 AH battery. For the price, it seemed like a killer deal. When I initially used the impact, I was stoked. It had lots of torque and was a tool I had never used. I immediately knew I would never go without an impact driver again. Admittedly, I put it though some fairly heavy usage, but Milwaukee’s motto is “Nothing but heavy duty,” right? Fast forward to a couple months and I started having problems with both the drill and the impact. The drill’s chuck would ratchet down to hold a bit and then release the bit at the worst times possible, even when I would fully tighten it. Please note: this seems to be a fairly common problem with the Fuel drill. I then sent it to get repaired. After 2 weeks, I finally got it back. At roughly the same time, the impact started to act up. The bit holder/collet would occasionally drop the bit it was holding or simply would not lock a new bit into place unless I racked the collet a couple times. While this was annoying, the main problem was the light hammering noise that would occur when the impact was held upside down. I got this fixed under warranty...after 2 more weeks. Turns out it was the motor, which is ridiculous considering it only had a couple months of use. The bit holding problem was not addressed because the repair man could not replicate the problem. Fast forward to today. The impact has started to make the same sound, but only just starting to (intermittent) and it will not accept/hold a new bit almost every time I go to swap out to a new bit and sometimes it will just outright drop the bit while I’m using it. The drill is starting to have the SAME problem with the chuck, even though it only has a handful of hours on it. PLEASE NOTE: after research, I found the chuck is a common problem with the driver. Ditto with the collet ring on the impact. Come on. Why can’t ANYONE make a drill that lasts more than a few months? I’m NOT putting it to very hard use. I mainly drill 1/8”-1/2” holes and drive 1 1/2”-3” screws with it. Ditto with the impact, except instead of drilling holes, it will rarely drive a lag screw instead. I bought Milwaukee’s top-of-the-line set for LONGEVITY and also for the warranty, assuming a 5 year warranty meant Milwaukee had confidence enough in their product to risk putting 2 extra years on the warranty compared to most others. Sure, the 1200/2000 inch pounds of torque for the drill and impact respectively are impressive, but I could care less if I have to run to the repair man every couple months and wait 2 weeks for it to be fixed. I dread the day when the warranty finely expires and I have 2 pieces of plastic with some motors inside. I expected to be able to have these tools for 10+ years...now I doubt I’ll have them for another year. Might just have to cut my losses and sell them to someone for cheap and get a different brand. What brand? I have no fracking clue. I will say this: before I got the Makita (which was before this Milwaukee set), I had a Black and Decker NiCd battery drill that, although slow, has never failed me (expect for the low battery life and torque, lol). We’ve had that drill for 10 years and has been used fairly heavily and it is still running fine. It was a cheap drill and has had less problems over the course of 10 years than my Milwaukee set has over the past few months. Update: The drill's chuck is terrible. It is now wobbling fairly poorly and has made driving screws significantly more difficult. The impact has a similar problem and its collet moves at completely ridiculous amounts. Perhaps up to a 1/16th of an inch (and it's only about 3/4" wide). For their top-of-the-line drill/impact, they are atrocious.
        Response from Milwaukee ToolOct 30, 2020
        Hello, this is Elise with Milwaukee Tool. Thank you for your review. We’re sorry to hear that your experience was not of the standard that you expected. We would like the opportunity to explore your feedback further. Please feel free to contact us directly at socialmedia@milwaukeetool.com if you would like further investigation into this matter. We look forward to gaining resolution on this for you. Thank You
          123 found this review helpful
          Excellent tools for all types of work!!...
          Excellent tools for all types of work!!
          • Verified Purchase
          4 found this review helpful
          For some reason the drill has the letters HT written on the bit holder... idk why
            • Recommended
            18 found this review helpful
            This is good but far from perfect
            Works great and comes in the nice storage case. I got this set a few months ago so I’ve had a while to use it and determine a fair evaluation. I don’t usually write reviews but many people act this set is the end all best perfect tool out there. I am a pro carpenter and use this set every day of my life. So here’s the scoop. Good- Excellent power when you pick it up and have it on the right setting. Switching over from Bosch, this driver can sink 3 » screws all day on the 3 setting which is nice. Downsides- speed setting randomly gets bumped so I pick it up and it’s on 1 slow speed so I have to mess with it. Another down is the but holder doesn’t always grip your bit first try so you have to make sure it’s held. It will fall out on you if you’re up on a ladder then you climb all the way down to look on the ground for your bit, so that leaves a lot to be desired in terms of a reliable set up. The last bad is I’ve had the drill hesitate on me, I pull the trigger and nothing happens... release the trigger then pull it again and it’s fine. Wierd. These bad things I mention never happened on my Bosch sets, but the power and warranty of the Milwaukee still make me recommend it. So there you go, it’s good but don’t expect it to be perfect. Also the case should totally have room for a Milwaukee bit case. I had to build my own from poplar it fits in the charger location.
              • Recommended
              26 found this review helpful
              Yes I have to afree with Bob
              Yes I have to agree with Bob I have the same problem with my drill cutting out then I have to take the he battery out slide it back in then seems to go for a little bit. Also the chuck I find to be garbage to a guy who's hands seem to need a drill when working in different inviroments and one of the chuck jaws always seems to want to hang up inside the chuck and you have to fight with it in order to get a bit in without it being out of center
                10 found this review helpful
                Milwaukee Used to Be Good
                These drills are not good. I owned the previous version of Milwaukee drills for ten years. GREAT TOOLS. Finally traded them in when the batteries wore out. These new ones scuck in comparison. 1. The collar which allows you to switch between drill and hammer-drill is clunky, and difficult to turn. Today, mine jammed and stuck in place, and I can't move it with a pair of channel lock pliers. Only used a few days. 1b. Clutch doesn't seem to work. On the lowest setting, the drill will drive a screw well into softwood without slowing. 2. The old drill had a built in clip that would hold two bit drivers while you used a drill or whatever. They deleted this feature. And there's no option to add one. Idiocy. Why? 3. The drill's built-in light is located above the trigger, where naturally, the shank of the drill creates a shadow which obscures the point of the bit. Which is what you're actually trying to see. This is bad design. The light should be located at the base of the handle where it would be aimed up at the bit area. Idiotic. 4. Milwaukee used to be made here. Now made in SE Asia with the rest. Quality sucks. 5. I'll be buying Makita now. BYE MILWAUKEE.
                Response from Milwaukee ToolFeb 18, 2020
                Hello DapperDanMan, this is Jacob with Milwaukee. I apologize for your experience with your hammer drill and appreciate that you took the time to bring this to our attention. We would like the opportunity to investigate your feedback further. Please could you contact me at socialmedia@milwaukeetool.com? We’ll work with you to resolve any issues as quickly as possible.
                Thank you.
                  24 found this review helpful
                  Great drill. Light and fast. Love the batteries run time.
                  Great drill. Light and fast. Love the batteries run time.
                  • Verified Purchase
                  • Recommended
                  2 found this review helpful
                  Showing 1-10 of 1,053 reviews