#1 Home Improvement Retailer

Internet #316091007

Model #2998-25-2729-20

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (5-Tool) with M18 FUEL Deep Cut Band Saw

Limit 3 per order
Apply Now
$undefined.00 /mo* suggested payments with months* financingApply Now
  • Includes (5) M18 FUEL tools, (2) 5.0 Ah batteries, charger & bag
  • Includes M18 FUEL Deep Cut Band Saw
  • Fully compatible with the M18 system, featuring over 200+ tools
  • View More Details

Frequently Bought Together


Product Overview

The Milwaukee M18 FUEL 5-Tool Combo Kit delivers users the most advanced 18-Volt cordless drilling, fastening, and cutting technology in the industry. This Milwaukee 5 Tool Combo Kit features five M18 FUEL 18-Volt Lithium-Ion brushless cordless tools including a 1/2 in. a hammer drill, 1/4 in. impact driver, SAWZALL reciprocating saw, 6-1/2 circular saw and LED work light. M18 FUEL is fully compatible with the Milwaukee M18 18-Volt cordless system, featuring over 200 solutions. M18 FUEL features the most advanced cordless technology in the industry a POWERSTATE Brushless Motor, REDLINK PLUS Intelligence and REDLITHIUM Battery Technology, resulting in longer motor life, longer run time, and more power.
  • 2804-20 hammer drill: POWERSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load
  • 2804-20 hammer drill: delivers up to 1200 in./lbs. of torque
  • 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications
  • 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces
  • 2821-20 SAWZALL recip saw: 1-1/4 in. stroke length removes more material with each stroke
  • 2729-20: industry's largest cut capacity: versatility to cut up to 5 in. x 5 in. material in one pass and adjustable shoe allows for less tool rotation when cutting material above 5 in.
  • 2735-20: Milwaukee M18 cordless LED work light has more than 600-times the life of conventional incandescent bulbs and runs up to 4-times as long
  • REDLITHIUM XC 5.0 Ah battery packs: deliver more work per charge and more work over the life of the pack than competitors
  • 2730-20 6-1/2 in. circular saw: POWERSTATE brushless motor provides increased cutting speed and power through the toughest applications
  • 2729-20: tool-free locking adjustable shoe: button actuated tool-free design allows user to quickly adjust from an extended shoe to no shoe in seconds
  • REDLINK PLUS intelligence: ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 system
  • 2729-20: Jobsite armor technology: proprietary composite material and crush zone barriers provide long-lasting rugged protection
  • Compatible with all M18 batteries and tools
  • Includes: one 2804-20 hammer drill/driver, one 2853-20 impact driver, one 2821-20 SAWZALL reciprocating saw, one 2730-20 6-1/2 in. circular saw, one 2735-20 LED work light, one 2729-20 deep cut bandsaw, two 48-11-1850 batteries, one 48-59-1812 battery charger, and 1 contractor bag
  • Shop All Milwaukee Products
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Power Tool Combo Kits

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (5-Tool) W/ M18 FUEL Compact Router
current product
M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (5-Tool) with M18 FUEL Deep Cut Band Saw
M18 Fuel 18-Volt Lithium-Ion Brushless Cordless Combo Kit (7-Tool) with 5.0 Ah Battery Pack (2-Pack)M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (7-Tool) with Framing Nailer
NameM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (5-Tool) W/ M18 FUEL Compact RouterM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (5-Tool) with M18 FUEL Deep Cut Band SawM18 Fuel 18-Volt Lithium-Ion Brushless Cordless Combo Kit (7-Tool) with 5.0 Ah Battery Pack (2-Pack)M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit (7-Tool) with Framing Nailer
Add to Cart to See Price
Power Tool FeaturesKeyless Chuck,LED Light,Variable SpeedKeyless Chuck,LED Light,Variable SpeedKeyless Chuck,LED Light,Variable SpeedKeyless Chuck,LED Light,Variable Speed
Battery Power TypeLithium IonLithium IonLithium IonLithium Ion
Cordless/ CordedCordlessCordlessCordlessCordless
Motor TypeBrushlessBrushlessBrushlessBrushless
Number of Total Batteries Included2242
Cordless Tool TypeCombo KitCombo KitSpecialtySpecialty
View ProductView ProductView ProductView Product



Battery Power Type
Lithium Ion
Charger Included
Charger Included
Color Family
Cordless Tool Type
Combo Kit
Cordless/ Corded
Tool Bag
Motor Type
Number of Tools (Bonus Tool Not Included)
Number of Total Batteries Included
Power Tool Features
Keyless Chuck,LED Light,Variable Speed
Tools Included
Band Saw,Circular Saw,Hammer Driver Drill,Impact Driver,Reciprocating Saw,Worklight
Tools Product Type
Power Tool

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
5 Years (Tool), 3 Years (Battery)

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.7
    out of 1,165 reviews
  • 86% recommend this product
Filter by:
Showing 1-10 of 1,165 reviews
Milwaukee Quality
5.0 allows for hours of work without needing to recharge. Drill works amazing and has never let me down. Impact driver is by far the most powerful I’ve ever used and makes working in the wood shop or around the house a breeze. Well thought out design.
    • Recommended
    Great Kit. But...
    As a Contractor, when it comes to battery powered,, I use milwaukee everything. for years I used the first generation ¼ impact and drill with the 1.5AH batteries and they never let me down. sure you swap batteries more frequently, but your second battery is already fully recharged by time your otger one dies..I recently upgraded to all FUEL brushless motor tools, and the difference is remarkable.The hard case is amust have for any real contractor. However my biggest problems with the case are 1: you basically want $120 just for the case. 2: the impact cannot be swapped for the ¼ SURGE impact. it will not fit in the case. which wastes more space in the tool trailer. and 3: milwaukee doesn't sell empty hard cases. (huge missed opportunity on their part)as for the impact and hammer drill, they're clear and obvious upgrades from the first generation. the grip is better formed than first gen. the brushless motors don't need to be "broken in" like first generation models needed to be. and the performance is fantastic.I'll carry milwaukee tools for life. Slightly because I'm so heavily invested into milwaukee batteries already, but also because the performance and reliability has never failed me.
      • Recommended
      1 person found this helpful
      The best drill and driver i habe ever used
      These are without a doubt, hands down, the best drill and drover I have ever used. I see in some reviews some folks got some faulty drills. Not the case for me. Ive had mine a couple of years and use them daily in a professional setting. The torque on the driver is unparalled. In some instances I even use it with a good bit to drill through stainless steel. And the hammer drill, an absolute monster, I drill into concrete and brick constantly and with ease. The 5 amp batteries provide plenty of life, I can get through a full work day, sometimes two on one charge.
        • Recommended
        7 people found this helpful
        Milwaukee didn't want me to post this review
        I read the reviews before purchasing, just like you are right now. I weighed the pros and cons of various brands, just like you. Listen to this review. It holds weight. I had this review on Milwaukee's website and they contacted me to tell me they wanted to get me in touch with their product manager for drills/drivers. They then took my review down (after roughly 2 days) and I never heard from them again. I then tried to repost the SAME review and the moderators took it down before it could be posted for "not following their review guidelines." For that, I'm taking my review from 2 stars down to 1. Pathetic. My original review: I originally got this combo (M18 Fuel Drill/driver and impact combo with (2) 5 Ah batteries) to replace the Makita XPH07 drill driver that had previously given me trouble with its rear bearing/motor assembly). This was around Black Friday of 2019, so Milwaukee was running their special of giving you 2 free items when you bought this kit. I chose their job site radio (I love the radio so much) and another 5 AH battery. For the price, it seemed like a killer deal. When I initially used the impact, I was stoked. It had lots of torque and was a tool I had never used. I immediately knew I would never go without an impact driver again. Admittedly, I put it though some fairly heavy usage, but Milwaukee’s motto is “Nothing but heavy duty,” right? Fast forward to a couple months and I started having problems with both the drill and the impact. The drill’s chuck would ratchet down to hold a bit and then release the bit at the worst times possible, even when I would fully tighten it. Please note: this seems to be a fairly common problem with the Fuel drill. I then sent it to get repaired. After 2 weeks, I finally got it back. At roughly the same time, the impact started to act up. The bit holder/collet would occasionally drop the bit it was holding or simply would not lock a new bit into place unless I racked the collet a couple times. While this was annoying, the main problem was the light hammering noise that would occur when the impact was held upside down. I got this fixed under warranty...after 2 more weeks. Turns out it was the motor, which is ridiculous considering it only had a couple months of use. The bit holding problem was not addressed because the repair man could not replicate the problem. Fast forward to today. The impact has started to make the same sound, but only just starting to (intermittent) and it will not accept/hold a new bit almost every time I go to swap out to a new bit and sometimes it will just outright drop the bit while I’m using it. The drill is starting to have the SAME problem with the chuck, even though it only has a handful of hours on it. PLEASE NOTE: after research, I found the chuck is a common problem with the driver. Ditto with the collet ring on the impact. Come on. Why can’t ANYONE make a drill that lasts more than a few months? I’m NOT putting it to very hard use. I mainly drill 1/8”-1/2” holes and drive 1 1/2”-3” screws with it. Ditto with the impact, except instead of drilling holes, it will rarely drive a lag screw instead. I bought Milwaukee’s top-of-the-line set for LONGEVITY and also for the warranty, assuming a 5 year warranty meant Milwaukee had confidence enough in their product to risk putting 2 extra years on the warranty compared to most others. Sure, the 1200/2000 inch pounds of torque for the drill and impact respectively are impressive, but I could care less if I have to run to the repair man every couple months and wait 2 weeks for it to be fixed. I dread the day when the warranty finely expires and I have 2 pieces of plastic with some motors inside. I expected to be able to have these tools for 10+ years...now I doubt I’ll have them for another year. Might just have to cut my losses and sell them to someone for cheap and get a different brand. What brand? I have no fracking clue. I will say this: before I got the Makita (which was before this Milwaukee set), I had a Black and Decker NiCd battery drill that, although slow, has never failed me (expect for the low battery life and torque, lol). We’ve had that drill for 10 years and has been used fairly heavily and it is still running fine. It was a cheap drill and has had less problems over the course of 10 years than my Milwaukee set has over the past few months. Update: The drill's chuck is terrible. It is now wobbling fairly poorly and has made driving screws significantly more difficult. The impact has a similar problem and its collet moves at completely ridiculous amounts. Perhaps up to a 1/16th of an inch (and it's only about 3/4" wide). For their top-of-the-line drill/impact, they are atrocious.
        Response from Milwaukee ToolOct 30, 2020
        Hello, this is Elise with Milwaukee Tool. Thank you for your review. We’re sorry to hear that your experience was not of the standard that you expected. We would like the opportunity to explore your feedback further. Please feel free to contact us directly at socialmedia@milwaukeetool.com if you would like further investigation into this matter. We look forward to gaining resolution on this for you. Thank You
          111 people found this helpful
          Debated which manufacturer to go with as my previous toolset batteries were discontinued. After t...
          Debated which manufacturer to go with as my previous toolset batteries were discontinued. After the first use of the Milwaukee impact I knew I made the right choice. Amazing power, battery life and a great design. My only regret is that I didn’t switch to Milwaukee sooner!
          • Verified Purchase
          • Recommended
          4 people found this helpful
          Excellent tools for all types of work!!...
          Excellent tools for all types of work!!
          • Verified Purchase
          3 people found this helpful
          For some reason the drill has the letters HT written on the bit holder... idk why
            • Recommended
            14 people found this helpful
            This is good but far from perfect
            Works great and comes in the nice storage case. I got this set a few months ago so I’ve had a while to use it and determine a fair evaluation. I don’t usually write reviews but many people act this set is the end all best perfect tool out there. I am a pro carpenter and use this set every day of my life. So here’s the scoop. Good- Excellent power when you pick it up and have it on the right setting. Switching over from Bosch, this driver can sink 3 » screws all day on the 3 setting which is nice. Downsides- speed setting randomly gets bumped so I pick it up and it’s on 1 slow speed so I have to mess with it. Another down is the but holder doesn’t always grip your bit first try so you have to make sure it’s held. It will fall out on you if you’re up on a ladder then you climb all the way down to look on the ground for your bit, so that leaves a lot to be desired in terms of a reliable set up. The last bad is I’ve had the drill hesitate on me, I pull the trigger and nothing happens... release the trigger then pull it again and it’s fine. Wierd. These bad things I mention never happened on my Bosch sets, but the power and warranty of the Milwaukee still make me recommend it. So there you go, it’s good but don’t expect it to be perfect. Also the case should totally have room for a Milwaukee bit case. I had to build my own from poplar it fits in the charger location.
              • Recommended
              23 people found this helpful
              Yes I have to afree with Bob
              Yes I have to agree with Bob I have the same problem with my drill cutting out then I have to take the he battery out slide it back in then seems to go for a little bit. Also the chuck I find to be garbage to a guy who's hands seem to need a drill when working in different inviroments and one of the chuck jaws always seems to want to hang up inside the chuck and you have to fight with it in order to get a bit in without it being out of center
                10 people found this helpful
                Milwaukee Used to Be Good
                These drills are not good. I owned the previous version of Milwaukee drills for ten years. GREAT TOOLS. Finally traded them in when the batteries wore out. These new ones scuck in comparison. 1. The collar which allows you to switch between drill and hammer-drill is clunky, and difficult to turn. Today, mine jammed and stuck in place, and I can't move it with a pair of channel lock pliers. Only used a few days. 1b. Clutch doesn't seem to work. On the lowest setting, the drill will drive a screw well into softwood without slowing. 2. The old drill had a built in clip that would hold two bit drivers while you used a drill or whatever. They deleted this feature. And there's no option to add one. Idiocy. Why? 3. The drill's built-in light is located above the trigger, where naturally, the shank of the drill creates a shadow which obscures the point of the bit. Which is what you're actually trying to see. This is bad design. The light should be located at the base of the handle where it would be aimed up at the bit area. Idiotic. 4. Milwaukee used to be made here. Now made in SE Asia with the rest. Quality sucks. 5. I'll be buying Makita now. BYE MILWAUKEE.
                Response from Milwaukee ToolFeb 18, 2020
                Hello DapperDanMan, this is Jacob with Milwaukee. I apologize for your experience with your hammer drill and appreciate that you took the time to bring this to our attention. We would like the opportunity to investigate your feedback further. Please could you contact me at socialmedia@milwaukeetool.com? We’ll work with you to resolve any issues as quickly as possible.
                Thank you.
                  22 people found this helpful
                  Showing 1-10 of 1,165 reviews