#1 Home Improvement Retailer

Internet #314302790

Model #2997-22-2719-20

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) W/ HACKZALL

  • Includes 2 tools: M18 FUEL hammer drill and impact driver
  • Also includes M18 HACKZALL that cuts up to 50% faster
  • Part of the M18 system, featuring over 200+ tools
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Milwaukee M18 FUEL is driven to outperform

M18 FUEL

Driven to Outperform

A wide selection of M18 FUEL cordless tools and solutions lined up

Unrivaled Performance

Deliver cutting edge solutions in their respective spaces.

M18 FUEL tools offer the best combination of technology for best in class performance.

M18 FUEL Exceeds Expectations

Featuring three Milwaukee-exclusive innovations

M18 FUEL brushless motor power tools maximize efficiency and lifespan

MILWAUKEE POWERSTATE Brushless Motors

Best-in-class brushless motor that works harder and lives longer than all leading competitors

M18 FUEL power tools feature REDLINK PLUS Intelligence for unmatched power, runtime, and durability.

MILWAUKEE REDLINK PLUS Intelligence

Full-circle communication between tool, battery and charger, allowing for unmatched levels of performance, protection and productivity

Graphic of the parts of a Milwaukee REDLITHIUM XC5.0 Battery Pack

M18 REDLITHIUM Battery Packs

Last longer, think faster and work harder than all other professional LITHIUIM-ION batteries

The Milwaukee M18 System offers over 200 cordless solutions.

System Compatibility

Part of the M18 System – Fits all M18 Batteries

Man wearing gloves and face shield uses the M18 FUEL Braking Grinder on metal as sparks fly.

M18 FUEL(TM) 7" / 9" Large Angle Grinder

Generates 15A Corded Power with a full 9" Grinding Capacity

Man cuts wood with M18 FUEL 8-1/4" Table Saw

M18 FUEL 8-1/4" Table Saw

Has a 24-1/2” of rip capacity and up to 600 linear feet of cutting per charge.

Man with work gloves on uses the M18 FUEL D-Handle High Torque Impact Wrench to remove lug nut.

M18 FUEL 1" D-Handle Ext. Anvil High Torque Impact Wrench w/ ONE-KEY

Delivers up to 2000 ft/lbs of Nut-Busting Torque while removing or installing up to 120 lug nuts per charge

Man wearing a hi-vis vest and work gloves uses the M18 FUEL 8" Metal Cutting Circular Saw on corrugated decking

M18 FUEL 8" Metal Cutting Circular Saw

Generates 15A Corded Power and faster cuts than corded saws

Man wearing a hi-vis vest and work gloves uses the M18 FUEL Pipe Threader on jobsite.

M18 FUEL Pipe Threader

AutoStop technology senses severe kickback and automatically shuts the tool off.

Man wearing hi-vis vest and work gloves uses the M18 FUEL SAWZALL reciprocating saw to cut metal pipe.

M18 FUEL SUPER SAWZALL Reciprocating Saw

Generates 15A corded power and faster cut speeds than corded saws

The Milwaukee 2997-22 two tool cordless combo kit delivers the most advanced 18-Volt cordless drilling and fastening technology in the industry. This kit features 2 M18 FUEL 18-Volt lithium-ion brushless cordless tools including a in. hammer drill and in. impact driver. M18 FUEL is fully compatible with the Milwaukee M18 18-Volt cordless system, featuring over 200 plus tools. Included is the M18 FUEL 1/2 in. Hammer Drill (2804-20) that delivers Up to 60% More Power, is Up To 1.5 Shorter and is Up To 2X Faster Under Heavy Load. At 1,200 in./lbs. of torque and 6.9 in. L it has the power for demanding applications and allows access into tight spaces. Also includes is the M18 FUEL 1/4 in. Hex Impact Driver (2853-20) which is the Fastest, Most Compact, and Most Powerful tool in its class. At 2,000 in./lbs. of torque and 4.59 in. it increases user productivity for demanding fasteners and gives users more access to tight spaces. M18 FUEL features the most advanced cordless technology in the industry, a POWERSTATE Brushless Motor, REDLINK PLUS Intelligence and REDLITHIUM Battery Technology, resulting in longer motor life, longer run time and more power. The Milwaukee 2719-20 M18 FUEL HACKZALL is the fastest cutting and most powerful 1-handed design reciprocating saw. Utilizing a POWERSTATE Brushless Motor and a best in class 7/8 in. stroke length, the M18 FUEL HACKZALL cuts up to 50% faster than competitors.
  • 2804-20 hammer drill: POWERSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load
  • 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque
  • 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications
  • 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces
  • REDLINK PLUS intelligence: ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18 system
  • REDLITHIUM XC 5.0 Ah battery pack: delivers more work per charge and more work over the life of the pack than competitors
  • Compatible with all M18 batteries and tools
  • 5-year tool and 3-year battery warranty
  • Includes: 1 M18 FUEL 1/2 in. hammer drill (2804-20), 1 M18 FUEL 1/4 in. hex impact driver (2853-20), 2 M18 REDLITHIUM XC5.0 battery, 1 M18 and M12 multi-voltage charger, 1 side handle, 2 belt clip, 2 bit holder, 1 carrying case, one 2719-20 M18 FUEL HACKZALL reciprocating saw
  • 2719-20: compact and lightweight design allows for easier cutting in tight spaces or overhead applications






  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Power Tool Combo Kits

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) W/ Free 5.0Ah Battery
current product
M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) W/  HACKZALL
M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) with FUEL BlowerM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) W/ Router
BrandMilwaukeeMilwaukeeMilwaukeeMilwaukee
NameM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) W/ Free 5.0Ah BatteryM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) W/ HACKZALLM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) with FUEL BlowerM18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) W/ Router
Price
Ratings
(2014)
(753)
(2614)
(753)
Power Tool FeaturesKeyless Chuck,LED Light,Variable SpeedKeyless Chuck,LED Light,Variable SpeedKeyless Chuck,LED Light,Variable SpeedKeyless Chuck,LED Light,Variable Speed
Battery Power TypeLithium IonLithium IonLithium IonLithium Ion
Cordless/ CordedCordlessCordlessCordlessCordless
Motor TypeBrushlessBrushlessBrushlessBrushless
Number of Total Batteries Included3222
Voltage (volts) 18
Number of Tools Included 2
Voltage (v) 18v
Battery Amp Hours 5 Ah
View ProductView ProductView ProductView Product

Specifications

Details

Battery Power Type
Lithium Ion
Charger Included
Charger Included
Color Family
Red
Condition
New
Cordless Tool Type
Combo Kit
Cordless/ Corded
Cordless
Included
Tool Case
Motor Type
Brushless
Number of Tools (Bonus Tool Not Included)
2
Number of Total Batteries Included
2
Power Tool Features
Keyless Chuck,LED Light,Variable Speed
Returnable
90-Day
Tools Included
Hammer Driver Drill,Impact Driver,Reciprocating Saw
Tools Product Type
Power Tool

Warranty / Certifications

Certifications and Listings
CSA Listed,ETL Listed,UL Listed
Manufacturer Warranty
5 Years on Tool, 3 Years on Batteries

Questions & Answers

57Questions11Answers

is this the surge or is it a different drill

Asked by FERN April 13, 2021
1
Answer

These are the Gen 3 models which are the latest and most powerful models.

Dose this kit come with the new updated Impact Driver with two ball bearings to hold bit in better?

Asked by JJ March 19, 2021
0
Answers

What is the weight of this comb product for shipping cost

Asked by Raymond March 18, 2021
1
Answer

Hi Raymond, not sure of the weight, but this information is more than likely on the website under product description. Mine shipped for free with Home Depot's online ordering.

What is the weight of the whole kit including its case?

Asked by Nivlem February 24, 2021
0
Answers

Is this the 2nd gen recip and circular saw?

Asked by Jesusjh February 22, 2021
0
Answers

Does it come with 2 barteries?

Asked by Compa January 30, 2021
3
Answers

yes it should. As a combo kit, it should come with 2 batteries.

I have hear reports of a similar drill having too much power for light jobs such as putting in dr...

Asked by GooP January 29, 2021
2
Answers

Never to much power! That's why the drills have variable speed triggers! learn to use it!

Do you have lighter weight tools for women? Say to work on furniture refinishing, reinforcem of ...

Asked by Lynn January 23, 2021
2
Answers

Lynn, That's a great question you've asked. Milwaukee is really diverse when it comes to their lineup of tools. There are 3 lines of tools meant for different purposes. The M12 line is as lightweight as you'll find anywhere and really quite small considering the amount of power you get with such a lightweight device. These tools are meant for lighter work and the ability to fit into tight spaces due to their size. They are affordable and a go to brand for furniture making, cabinets etc. They are still quite powerful even though they're small so be mindful of that. The M12 line can be used by do it yourselfers or professionals looking for tools that are a bit smaller than usual. The M18 line is a professional grade line. These tools while slightly smaller than other professional grade brands pack more power than competitor brands built for the same purpose. These tools are so powerful even professionals have to get used to not overdoing it. The MXFuel lineup is strictly professional industrial use and are quite large as to be expected. These are tools you might use for big jobs such as concrete work etc. Based on your comments I'd recommend you take a look at the Milwaukee M12 tools and think you'll be quite pleased.

it says get a free tool...is it tool only and also can we choose any fuel tool?

Asked by Vlad January 14, 2021
1
Answer

The free tool is a bare tool...You can choose your free tool from a preselected group of tools...

How do i get a free tool

Asked by Scott January 9, 2021
1
Answer

If several tools are available, you select the free tool at time of purchase or mail back a selection form or the free tool has already included with the tool kit purchased...

M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Hammer Drill and Impact Driver Combo Kit (2-Tool) W/ HACKZALL - page 2

Customer Reviews

  • 4.7
    out of 753 reviews
  • 85% recommend this product
Filter by:
Showing 1-10 of 753 reviews
The best drill and driver i habe ever used
These are without a doubt, hands down, the best drill and drover I have ever used. I see in some reviews some folks got some faulty drills. Not the case for me. Ive had mine a couple of years and use them daily in a professional setting. The torque on the driver is unparalled. In some instances I even use it with a good bit to drill through stainless steel. And the hammer drill, an absolute monster, I drill into concrete and brick constantly and with ease. The 5 amp batteries provide plenty of life, I can get through a full work day, sometimes two on one charge.
by Matt
5 people found this helpful
Milwaukee didn't want me to post this review
I read the reviews before purchasing, just like you are right now. I weighed the pros and cons of various brands, just like you. Listen to this review. It holds weight. I had this review on Milwaukee's website and they contacted me to tell me they wanted to get me in touch with their product manager for drills/drivers. They then took my review down (after roughly 2 days) and I never heard from them again. I then tried to repost the SAME review and the moderators took it down before it could be posted for "not following their review guidelines." For that, I'm taking my review from 2 stars down to 1. Pathetic. My original review: I originally got this combo (M18 Fuel Drill/driver and impact combo with (2) 5 Ah batteries) to replace the Makita XPH07 drill driver that had previously given me trouble with its rear bearing/motor assembly). This was around Black Friday of 2019, so Milwaukee was running their special of giving you 2 free items when you bought this kit. I chose their job site radio (I love the radio so much) and another 5 AH battery. For the price, it seemed like a killer deal. When I initially used the impact, I was stoked. It had lots of torque and was a tool I had never used. I immediately knew I would never go without an impact driver again. Admittedly, I put it though some fairly heavy usage, but Milwaukee’s motto is “Nothing but heavy duty,” right? Fast forward to a couple months and I started having problems with both the drill and the impact. The drill’s chuck would ratchet down to hold a bit and then release the bit at the worst times possible, even when I would fully tighten it. Please note: this seems to be a fairly common problem with the Fuel drill. I then sent it to get repaired. After 2 weeks, I finally got it back. At roughly the same time, the impact started to act up. The bit holder/collet would occasionally drop the bit it was holding or simply would not lock a new bit into place unless I racked the collet a couple times. While this was annoying, the main problem was the light hammering noise that would occur when the impact was held upside down. I got this fixed under warranty...after 2 more weeks. Turns out it was the motor, which is ridiculous considering it only had a couple months of use. The bit holding problem was not addressed because the repair man could not replicate the problem. Fast forward to today. The impact has started to make the same sound, but only just starting to (intermittent) and it will not accept/hold a new bit almost every time I go to swap out to a new bit and sometimes it will just outright drop the bit while I’m using it. The drill is starting to have the SAME problem with the chuck, even though it only has a handful of hours on it. PLEASE NOTE: after research, I found the chuck is a common problem with the driver. Ditto with the collet ring on the impact. Come on. Why can’t ANYONE make a drill that lasts more than a few months? I’m NOT putting it to very hard use. I mainly drill 1/8”-1/2” holes and drive 1 1/2”-3” screws with it. Ditto with the impact, except instead of drilling holes, it will rarely drive a lag screw instead. I bought Milwaukee’s top-of-the-line set for LONGEVITY and also for the warranty, assuming a 5 year warranty meant Milwaukee had confidence enough in their product to risk putting 2 extra years on the warranty compared to most others. Sure, the 1200/2000 inch pounds of torque for the drill and impact respectively are impressive, but I could care less if I have to run to the repair man every couple months and wait 2 weeks for it to be fixed. I dread the day when the warranty finely expires and I have 2 pieces of plastic with some motors inside. I expected to be able to have these tools for 10+ years...now I doubt I’ll have them for another year. Might just have to cut my losses and sell them to someone for cheap and get a different brand. What brand? I have no fracking clue. I will say this: before I got the Makita (which was before this Milwaukee set), I had a Black and Decker NiCd battery drill that, although slow, has never failed me (expect for the low battery life and torque, lol). We’ve had that drill for 10 years and has been used fairly heavily and it is still running fine. It was a cheap drill and has had less problems over the course of 10 years than my Milwaukee set has over the past few months. Update: The drill's chuck is terrible. It is now wobbling fairly poorly and has made driving screws significantly more difficult. The impact has a similar problem and its collet moves at completely ridiculous amounts. Perhaps up to a 1/16th of an inch (and it's only about 3/4" wide). For their top-of-the-line drill/impact, they are atrocious.
by Ethobling
Response from Milwaukee ToolOct 30, 2020
Hello, this is Elise with Milwaukee Tool. Thank you for your review. We’re sorry to hear that your experience was not of the standard that you expected. We would like the opportunity to explore your feedback further. Please feel free to contact us directly at socialmedia@milwaukeetool.com if you would like further investigation into this matter. We look forward to gaining resolution on this for you. Thank You
87 people found this helpful
Excellent tools for all types of work!!...
Excellent tools for all types of work!!
by HomeDepotCustomer
3 people found this helpful
used?
For some reason the drill has the letters HT written on the bit holder... idk why
by HomeDepotCustomer
10 people found this helpful
This is good but far from perfect
Works great and comes in the nice storage case. I got this set a few months ago so I’ve had a while to use it and determine a fair evaluation. I don’t usually write reviews but many people act this set is the end all best perfect tool out there. I am a pro carpenter and use this set every day of my life. So here’s the scoop. Good- Excellent power when you pick it up and have it on the right setting. Switching over from Bosch, this driver can sink 3 » screws all day on the 3 setting which is nice. Downsides- speed setting randomly gets bumped so I pick it up and it’s on 1 slow speed so I have to mess with it. Another down is the but holder doesn’t always grip your bit first try so you have to make sure it’s held. It will fall out on you if you’re up on a ladder then you climb all the way down to look on the ground for your bit, so that leaves a lot to be desired in terms of a reliable set up. The last bad is I’ve had the drill hesitate on me, I pull the trigger and nothing happens... release the trigger then pull it again and it’s fine. Wierd. These bad things I mention never happened on my Bosch sets, but the power and warranty of the Milwaukee still make me recommend it. So there you go, it’s good but don’t expect it to be perfect. Also the case should totally have room for a Milwaukee bit case. I had to build my own from poplar it fits in the charger location.
by RobF
17 people found this helpful
Yes I have to afree with Bob
Yes I have to agree with Bob I have the same problem with my drill cutting out then I have to take the he battery out slide it back in then seems to go for a little bit. Also the chuck I find to be garbage to a guy who's hands seem to need a drill when working in different inviroments and one of the chuck jaws always seems to want to hang up inside the chuck and you have to fight with it in order to get a bit in without it being out of center
by Ron
8 people found this helpful
Milwaukee Used to Be Good
These drills are not good. I owned the previous version of Milwaukee drills for ten years. GREAT TOOLS. Finally traded them in when the batteries wore out. These new ones scuck in comparison. 1. The collar which allows you to switch between drill and hammer-drill is clunky, and difficult to turn. Today, mine jammed and stuck in place, and I can't move it with a pair of channel lock pliers. Only used a few days. 1b. Clutch doesn't seem to work. On the lowest setting, the drill will drive a screw well into softwood without slowing. 2. The old drill had a built in clip that would hold two bit drivers while you used a drill or whatever. They deleted this feature. And there's no option to add one. Idiocy. Why? 3. The drill's built-in light is located above the trigger, where naturally, the shank of the drill creates a shadow which obscures the point of the bit. Which is what you're actually trying to see. This is bad design. The light should be located at the base of the handle where it would be aimed up at the bit area. Idiotic. 4. Milwaukee used to be made here. Now made in SE Asia with the rest. Quality sucks. 5. I'll be buying Makita now. BYE MILWAUKEE.
by DapperDanMan
Response from Milwaukee ToolFeb 18, 2020
Hello DapperDanMan, this is Jacob with Milwaukee. I apologize for your experience with your hammer drill and appreciate that you took the time to bring this to our attention. We would like the opportunity to investigate your feedback further. Please could you contact me at socialmedia@milwaukeetool.com? We’ll work with you to resolve any issues as quickly as possible.
Thank you.
17 people found this helpful
Great drill. Light and fast. Love the batteries run time.
Great drill. Light and fast. Love the batteries run time.
by Kyle
2 people found this helpful
I have delayed a bit on writing this review of the Milwaukee 2997-22 Combo set in order to have s...
I have delayed a bit on writing this review of the Milwaukee 2997-22 Combo set in order to have sufficient hands-on experience with the tools to offer information that is more than just a first impression of a new tool. I have owned and used many cordless and corded drills throughout the years, and I must say that this 2804 hammer drill is at least as powerful and fast as any corded drill and better than other cordless drills that I have used. The drill has absolutely enormous torque, that will “rip your arm off” if you let it. Drilling and hammer drilling are super-fast, even through dense and hard materials. Hammer drilling into poured concrete using large 3/8” and 1/2” by 12” masonry bits is like a hot knife through butter. With a masonry duplex bit for setting caulk-in anchors in concrete it is shockingly fast and easy. Using the drill as a driver is also very fast, and the clutch settings for the chuck are very easy to set accurately based on the fastener, material and desired torque on the set fastener. Much of this excellent drilling and driving is undoubtedly attributable to the extremely powerful, brushless motor. It is absolutely incredible, and almost shocking to have such a powerful and versatile drill in such a small form factor. This drill is definitely compact, which is a tremendous benefit when working in tight spaces. That this very compact drill delivers so much power is really remarkable. The high-speed gear range is very fast, and the low-speed gear range is really best for drilling through hard metals and for better speed control for some fastener driving operations (such as long lag screws into dense wood). Again, I find it incredible that such a compact and light drill is as powerful as this! The battery capacity is good, but it would probably be more convenient if the included battery charger could charge two batteries simultaneously. I really appreciate the battery test button with 4 LED bars on each of these lithium-ion batteries to show the remaining charge on the battery. I have read some critical reviews of this drill on Milwaukee’s own website, and I want to address them and offer my opinions regarding the criticisms written there. There are complaints that this drill runs hot, and that is true. When the drill is used heavily and/or for long periods the drill builds up heat. I have not experienced this with other cordless drills, but none of them were as small or as powerful as this drill, and I suspect that the heat is a product of such a powerful motor being constrained to such a small size. I have not found the heat to be a problem in using the drill; it does not slow down or lose power or stop running. I hope that running hot at times will not reduce the lifespan or reliability of the tool, long-term. It is far too soon to know. Others complained that the trigger sometimes sticks / hangs. I have also experienced this intermittently, where the trigger seems to be stuck when pressed, requiring jiggling of the trigger to free it up. I find this to be a very minor issue, albeit unexpected for a professional quality power tool. I also found (as did at least one other owner who posted) that the speed range selector slide switch on top of the drill housing is sometimes difficult to move (binding) between the two positions. I don’t know if this occasional annoyance is due to a poor design of the internal gear change lever which connects the plastic switch to the gearbox, or if it is due to the design of the plastic slide switch itself. Besides the complaint about the drill getting hot, the other apparently most common complaint is about the chuck wobbling. This too is a valid complaint. As I previously stated, I have owned and used many drills, and I have indeed experienced other drills with chucks that wobble. I have to assume that the chuck wobble on this model drill is resultant from a quality control shortcoming in the assembly process. The tolerances for chuck wobble appears to vary, but if it is too bad the results are oversized holes and great difficulty in driving fasteners (especially longer ones). As other users will also attest, the foregoing issues appear to be very common with this model drill. I checked both another new unit in the store, as well as the unit on display in the tool aisle, and both of them had the identical issues, as well. But for the foregoing, common issues, this drill is really a champ! The speed and torque ratings claimed by Milwaukee for this tool are about the best you will find, and based on my hands-on experience with this drill, I don’t doubt that they are true. This drill is all about p-o-w-e-r. The 2853 impact tool in this combo kit is also a champ and a powerhouse. This impact tool has four power/speed settings (electronically switched), which really accommodates every impact driving use ranging from driving small fasteners into sheet (gauge) metal, to driving large lag screws into very dense wood beams and columns. You can run it very slow, or very fast, as needed. It too is a remarkably powerful tool in a very small and light package. This tool is so compact, with such a short length, that it will work easily in very confined spaces. For both tools, most of the weight is in the batteries (IMHO); even so the tools are really very pleasant to handle and use for lengthy periods of time without complaint. They both have a rubber covering on the handles that provide for a very good grip and comfortable use. Both tools also have a bright LED light to illuminate your work, which is also great. In summary, both of these tools are very compact and lightweight, but are more powerful than any cordless tool that I have used. It is incredible that so much power is packed into such small tools!
by Curmudgeon
39 people found this helpful
Both impact an drill have tons of power. My first time ever owning anything by Milwaukee an I can...
Both impact an drill have tons of power. My first time ever owning anything by Milwaukee an I can say Milwaukee makes great tools.
by Sundownboy
1 person found this helpful
Showing 1-10 of 753 reviews