M18 FUEL ONE-KEY 18- volt Lithium-Ion Brushless Cordless 8-1/4 in. Table Saw Kit W/ (1) 12.0Ah Battery & Rapid Charger

I'm a flooring installer, I have owned this saw for two years I rip lvt or click lock all day the 12.0ah battery lasts me two days with a fine tooth blade. The fence or guide system is flawless and the fuel motor has no vibration. For interior cuts I just added the packout vac.

Milwaukee’s FUEL table saw delivers the power of a 15 amp corded table saw and a maximum rip capacity of 24 1/2 inches. With a Powerstate brushless motor, the table saw can rip up to 600 linear feet on a full charge using as 12.0 High Output M18 battery. Max blade speed is 5800 RPM which really helps to make smooth rips. This table saw easily cuts 4’x8’ sheets of plywood or OSB. The saw uses a 8 1/4” blade and the height can be adjusted to a maximum cut depth of 2 1/2” at 90 degrees and 1 3/4” at 45 degrees. Your maximum rip capacity on the left is 12” and 24 1/2” on the right. The table saw features a blade guard system and pawls to prevent kick back along with a push stick to really aid in safe operation of the table saw. Adjusting the rip capacity is really simple using a dial and making precise adjustments is very easy. You can also make bevel cuts to a maximum of 47 degrees. Blade height is also easily adjusted using a dial. The saw has on board started for a riving knife, push stick, and a fence and miter gauge. The saw has an all metal frame for durability and also a handle on the side of the saw for easy carrying to and from the job site. Total weight of the table saw is 44.9 lbs. Make sure to read through the owner’s manual for proper installation of the blade guard system and pawls and location of the on board storage. The manual also shows you how to make adjustments to the saw which may be required after a period of use. The saw was accurate in measurements out of the box, which I did check, you can find videos online on how to check for accuracy. I was excited to buy this table saw as it has been on my to buy list for quite some time so when I recently sold my old corded table saw that I had for many years I immediately made the purchase. In terms of performance I have not felt like the saw lacked in power even though it’s battery operated and it runs way more quiet then all of the corded table saws I have had over the years. I also bought Milwaukee’s table saw stand (48-08-0561). The saw also has One-Key for tracking and management of the table saw, I don’t work on huge job sites where there is a need for this feature, but still cool to be able to lock the tool out in case it gets stolen. I feel like Milwaukee did a great job with the overall design and location of on board storage but most of all I like the design of how you make adjustments to the rip fence and blade height. I feel like adjusting the blade for bevel cuts could have been made the same way as adjusting the height, but not that big of a deal for the work that I do. Overall really happy with this purchase and so far no issues what so ever with the performance or design of this table saw!!

I’ve owned this saw since the year it came out and it’s still kicking as good as the day I got it. Plenty of power, plenty of run time. Works best if you have 2 12.0 batteries to cycle through if you’re doing a lot of work. My only gripe is the table seems a bit soft, had a piece of metal fall of it and it chipped the edge of the table top. Aside from that it’s been great and if it ever stops working I’d gladly replace it with another

I got this saw last year during the pandemic lockdown, and have been using it non-stop since then. It's been super reliable, easy to use and very accurate. The fact that it packs sideways is amazing. I just switched to a Milwaukee 40 tooth fine finish blade and my cuts on plywood are great. Overall, really happy with the purchase.

My first impression of this table saw is not good. I had to recalibrate every single setting on this saw out of the box not the easiest saw to calibrate especially the riving knife. What really bugs me about this table saw and is its biggest flaw is the fence locking mechanism. It is not a very strong lock if you push to hard against the fence it will move which will throw off your measurement and could possibly be a safety issue. I also noticed if you raise the blade all the way up the blade will tilt in slightly and will no longer be at 0° not a big deal I just don't raise it up all the way. What I do like about the saw is once you get everything calibrated in my case it took awhile and kind of frustrating You can get accurate and square cuts. Just have to be very mindful of the fence to much pressure and it moves. also seems to have plenty of power and is very portable and compact. I'll post a photo of the lock mechanism and the plastic gears of the rack and pinion fence not sure which is the problem.

This Table Saw definitely has sufficient power in cutting hardwood at its stated thickness! I followed the instruction to align the saw tilt angle first and then the "yaw" (for the yaw, I flipped the table saw upside down). It's now well within 0.0005" and 0.05 degree. the AFTER cutting distance between the blade and the fence is exactly as the indicator (a red thin line) pointed at the ruler: which means if you want your after cut wood is 1/5 inch, then point the red thin line on the 1/5 inch mark and you'll get a 1/5 inch wide wood after the cut. I used this table saw to cut walnut, maple, and cherry hardwood materials to make a cutting board. This cutting board has 192 pieces of 3/4" by 1/5" to form a 16" X 18" cutting board. The precision, power, and smooth cutting made the final cutting board pieces glued together seamlessly. I used both 5A and 6A batteries, for me, either one can last all day.

Those reviewing this saw and giving a poor rating are those who dont know how to work table saws. Ive been in this buisness 25 years and this saw is smooth. Highly recommend

100% satisfied with this product. I am a contractor

This product has preformed well has plenty of power cuts everything i have feed through it

Overall great saw, purchased under 3 months ago. Highly reccomend getting the stand with it. Would have given 5 stars easily if not for the fact that I the rule warped and eventually came clmpletely off after sitting in the sun for a coulle hours during a project. This is supposed to be a professional grade tool, it shouldnt start falling apart in the sun. I own around a dozen m18 tools and have never had to warranty anything before. So far it seems like their process is exclusive set up for repairing major mechanical issues. I really dont want to pay to ship a table saw in to get an adhesive-backed rule replaced