SHOCKWAVE Impact Duty Alloy Steel Screw Driver Bit Set (50-Piece)

These impact bits hold up with heavy use and there are many sizes and options.

Bought this bit set for my husband for Christmas. Only a few bits have been used since. I used a bit today to put in a screw thru cheap lightweight wood and the end snapped right off!!

This Milwaukee Driver Bit kit worked perfectly on my first job with it. I’m glad I had the complete selection of sizes available in this kit. I used these bits to remove a wooden donation cabinet that was attached to a brick wall with screws. I needed a large square driver, a small star driver, and a small Phillips head driver to remove screw from wall and cabinet. All were available in long or short lengths, and also a socket to hold the smaller interchangeable bits. Job was done in five minutes! There were also three small socket sizes normally used on appliances in this kit. Milwaukee makes great products, and the quality of these bits seems to meet their standards. Would definitely recommend to a friend.

The Milwaukee SHOCKWAVE Impact Duty Alloy Steel Screw Driver and Drill set has just about all the common bits used plus nut drivers and drill bits. I think it's a very useful set of bits and accessories including a 6-inch magnetic extension for those hard-to-reach places. The nut drivers are also magnetic. It all comes with a nice storage case so you don't have to search to find the right bit for the job. I'm always taking something apart for cleaning or repair and this set comes in very handy.

This set has every square and star bit you'd need as well as Phillips and with all the lengths you would need and multiples of those. So, especially for professionals, as you work, and bits break, there are replacements. That said, these are durable bits and I had none of them break. This set of bits is a great investment and value. The cases are made of a nice tough plastic.

Milwaukee SHOCKWAVE Impact-Duty Alloy Steel Screw Driver Bit Set (100-Piece) is an extensive set of impact and drill driver bits in various shaft lengths. The bits have standard ¼ – inch hex ends for use both in cordless hex impact drivers and ratchet screw drivers. The set comes with five tip end types: Phillips, Slotted, Hex, Square and TORX. All the bits come in multiples so you have several in most sizes. I use these type bits with extensions because I have mostly stubby one inch bits and prefer the longer shafts. The set bit shafts come in various lengths, some 3 ½ - inches to get deeper into spaces and stubbier ones, one and two inches long, as needed. For all the sizes, included is a 2 ½ - inch magnetic extension adapter to go even deeper. Magnetic extensions are a necessity especially when working with the small bit sizes. Extensions work well, but prefer long shafts that feel more secure using them with some tasks. The SHOCKWAVE tag has been around for a while and is designated for impact use as well as all other uses. Impact work is hard on bits and these are designed to hold up better than others. These drive bits have a shock zone in the shaft to lessen over torquing the bit head. Over torquing can snap the screw head. They absorb some of the twisting at high torque. This translates into longer lasting bits that don't wear as quickly, will stay sharp and hold screws securely. Another improvement is a modified tip design to extend wear, not as obvious. I haven't had them long enough to vouch for these claims. but have good experience with an earlier driver bit set by Milwaukee, and these are made even better. Finally, with all the small pieces in the set a good storage case and organizer is a necessity. The two driver bit cases included are redesigned to fit in Milwaukee's PACKOUT storage system and are made to last. The hinges run along the back and it has a positive locking clasp to keep the bits secure. This set is likely the last one I'll be needing.

I love these screw driver bits because I use them with my Milwaukee power driver for almost everything I do around my house and vehicles. The hard case keeps the bits in order and it secures closed with a good sliding latch. The kit includes drivers and screw drivers which you plug into adapters and extensions to reach hard to reach areas. It also includes socket bit holders for 1/2 and 3/8 inch sockets.

This Milwaukee SHOCKWAVE Impact-Duty Alloy Steel Screw Driver Bit Set is a great addition to my home tool kit! It has 80 bits in it, all are high quality material and are built to last! It even contains the star bits and hex as well, so I expect this will meet all my bit needs going forward. I also think the red Packout storage case keeps all the bits organized so its easy to find just the bit you need. Very happy with this!

I would call these simply the best bit kit I have owned. The material is very hard but does not chip under heavy loads. The tips are partially machined to give it the perfect fit in screw heads. This kit has enough bits to last you a long time and dispose of the old ones which we keep around for the occasional odd screw head! I really appreciate the inclusion of very long shaft bits, which come in handy in many occasions, now extensions are not required any more

bit set seems to be a good deal i tried many of the bits several times but one of my bits which is one of the ph1 broke after maybe 4 times of using it. must of been defective because the other bits i use , which are the ph2 are goin strong with no issues.. the only issue now is i gotta go to home depot and buy that bit that broke to complete my set. ill give it a better review after a month of using them to see how they handle after many uses. the image i left on the review, im pointing to the one that is missing because it broke.