This Milwaukee Shockwave Right Angle Drill Adapter with its 1.4 in. slim profile provides access into tight areas. The Internal Shockzone absorbs peak torque and stops breaking. For increased torque transfer, it offers hardened gears. You can use it in both drill drivers and impact drivers and works with all 1/4 in. hex shank accessories.Made with custom alloy 76 steel, it allows years of use.
Provides up to 30X life
Hardened gears allow for increased torque transfer
Features a magnet to retain bits
Ergonomic rubber over mold for added comfort during use
For use with 1/4 in. hex shank accessories
Designed for use in impact drivers and drill drivers
Includes one right angle adapter and one, 1 in. PH2 driver bit
I bought this tool with high hopes but it then snapped the next day on its first task.
by
Response from Milwaukee ToolFeb 25, 2022
Hello, this is Cayla with Milwaukee Tool. Phil, thank you for your review. We’re sorry to hear that your experience was not of the standard that you expected. We would like the opportunity to investigate your feedback further, so please feel free to contact us directly at socialmedia@milwaukeetool.com if you would like further investigation into this matter. Look forward to gaining resolution on this for you. Thank You
Dec 9, 2021
Tougher Than The Rock
The bits are a real variety with the assortment you get. The adapter is magnetic so you don’t lose bits and is easily changeable. The case is awesome that I can store other bits inside.
by
Recommended
Jan 6, 2021
A pretty good set but...
Kinda disappointed. I know... it's nothing to be upset about, but the nut for connecting attachments on the rear of the case isn't there. There is an obvious "mold edge" that means they removed it on purpose when making this run of cases, but if you look in the images on the site, it's clearly there... You don't really find that out until you open it unless you're really looking for that in particular... I wasn't because I just assumed it was going to be there...
by
Response from Milwaukee ToolJan 12, 2021
Hello, this is Elise with Milwaukee Tool. Zack, thank you for your review. We’re sorry to hear that your experience was not of the standard that you expected. Please feel free to contact us directly at socialmedia@milwaukeetool.com if you would like further investigation into this matter. Thank You
Recommended
4 found this review helpful
Sep 9, 2020
Essential!!
[This review was collected as part of a promotion.] The Milwaukee Shockwave Right angle adaptor has become an essential for my tool bag. I got this gem in hopes it would help me get in tighter spaces and it certainly delivered. I travel and tear down and install automated lines and there are always so many screws and small bolts that I just can not reach with my impact, loosely translated, alot of busted knuckles...This right angle adaptor is slim and sleek and fits in tight spaces that I could never have gotten to without it. It has sped up the time it takes me to get the job done!! No more busted knuckles for me. I think everyone on my crew has borrowed and then bought this handy little tool. Thank you Milwaukee!!
by
Recommended
Customer review from milwaukeetool.com
Sep 1, 2020
Helps a lot
[This review was collected as part of a promotion.] The Milwaukee Impact right adapter is not a tool I use everyday but when it’s needed it’s indispensable. With it’s slim profile it makes the impossible angles possible. The magnetic tip holds the bits securely and rubberize body of the adapter fits comfortably in my hand.
by
Recommended
Customer review from milwaukeetool.com
Aug 31, 2020
Husband loves it!
[This review was collected as part of a promotion.] My husband is a commercial electrician. He works in some tight spots sometimes. He is thrilled with this. It is made well and works as described. Ironically, its even thr brand of his preferred tools he uses daily. I was sent this to test and we can't be happier with it. It really is a life saver in tight spaces.
by
Recommended
Customer review from milwaukeetool.com
Aug 27, 2020
Nice tool
[This review was collected as part of a promotion.] My husband has used this tool a few times now to get into tight spots. He has large hands therefore making it difficult to get into tight spaces. He has recently used this while trying to fix the 4 wheeler. This tool was able to get into the spots his hand wouldn't fit. He said it's very easy to use and has a nice grip to it. I can see where this will come in quite handy!
by
Customer review from milwaukeetool.com
Aug 27, 2020
Invaluable tool for tight spaces
[This review was collected as part of a promotion.] In professional or DIY situations, I'm a firm believer that everyone should own a right angle adapter. There's just certain tight fits that nothing else will do.
Impressions:
Pros:
1. The head of the tool is magnetized so it's very easy to change out bits.
2. This is a well made tool. It's heavy and made of quality materials.
3. Engagement is immediate and solid.
Cons:
1. Only one bit is included. It's nice to have a Phillips head included, but I found it very curious a flat head wasn't also included. Obviously, it takes standard bits, but it just seemed strange.
2. It's very clear through my research on this tool, that it's not up to the task of use with industrial strength impact drivers. While I'd rarely have cause to use it with an industrial strength driver, I'd like to have that option.
At the same time, this will and has already, held up to all my drills and my other less powerful drivers, so it's a minor issue.
Overall:
I'd recommend this to anyone outside of those who would regularly use this with a high powered industrial impact driver. Outside of that, this tool is up to the task.
Recommended
4 stars
Cheers!
by
Recommended
Customer review from milwaukeetool.com
Aug 13, 2020
Works better than I thought
We all have had the need to get into tight spots to secure or remove something. I just wish I had bought this sooner. As long as you have pressure on the head it honestly feels like you are screwing it in with a normal screw gun. You might need a extra hand to hold in place. I will be buying another just to have in case I break or loose this one. It's a must for anyone who owns a drill.
by
Recommended
1 found this review helpful
Aug 13, 2020
Works better than I thought
We all have had the need to get into tight spots to secure or remove something. I just wish I had bought this sooner. As long as you have pressure on the head it honestly feels like you are screwing it in with a normal screw gun. You might need a extra hand to hold in place. I will be buying another just to have in case I break or loose this one. It's a must for anyone who owns a drill.