$29.97
Pay $4.97 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Milwaukee SLEDGE™ chisels stay sharper longer
- Reinforced edges deliver maximum durability and reduce wear
- Engineered to maintain sharper edges for increased productivity
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Specifications
Questions & Answers
5Questions
Q:What is the length of each one?
by|Sep 6, 2023
1 Answer
Q:Will these fit a ridgid 18volt rotary hammer
by|Jul 21, 2023
2 Answers
Q:Can you use them on M12 SDS-Plus Rotary Hammer?
work good?
by|Apr 13, 2023
2 Answers
Q:Is possible to have it replaced if broken?
by|Jan 20, 2023
0 Answer
Showing 1-4 of 5
5
130
4
12
3
1
2
1
1
3
Jan 6, 2023
Great chisel!
Used the chisel bit with a Milwaukee SDS corded rotary hammer in hammer only mode to open up a poured concrete cinder block wall to repair a water main. Took a little over an hour. Bit still looks like new.
by
May 21, 2022
Concrete Demolition
These worked great with my rotary hammer to remove a 2 inch concrete slab. I mainly used the pointed one as it acted much like a drill and broke the concrete up much faster.
by
May 4, 2022
Chopping away
Completed a partial pool remodel chipping around returns, 66 total. Performed as it should.
by
Dec 23, 2020
These bits were a great addition to my sds drill. They have worked out great when I’ve needed som...
These bits were a great addition to my sds drill. They have worked out great when I’ve needed some decent precision on some demo. They go in nice and smooth and lock in like they should to my sds. I was running some sprinkler lines and some of the foundation of the house I was working on was really over poured on some parts. The 3/4 flat chisel took care of that no problem. The bull point worked out great on some precision work I had to do to remove some stucco. Both bits have worked out great and still have their tips on them. The 3/4 flat I used quite a bit not just for that one job but also to break up some blocks removed from a wall. The sharp bit really does dig in into any masonry I’ve used it on. They are a good length and I haven’t had any issues getting into anything with them. They are high quality and can keep up with anything I’ve thrown at them. They kept their shape and feel very reliable. I definitely don’t feel like they will break that’s for sure. And surprisingly they’re not too heavy and don’t make my box feel unbearable.
by
Dec 1, 2020
The Milwaukee 2 pack SDS-Plus Sledge comes with a 10” bull point & ¾” x 10 Flat Chisel. It made ...
The Milwaukee 2 pack SDS-Plus Sledge comes with a 10” bull point & ¾” x 10 Flat Chisel. It made of high-grade forge steel to stay sharper longer. It has reinforced edges to help deliver reduced wear over the life of the chisel. The bull point is ideal for starting holes and the flat chisels for general chipping and breaking concrete. These bull point and flat chisels is made for the use of the SDS-Plus rotary and hammers. I had to use it to chip away some concrete for a PVC coming through it. It performed very well. The thicker part took a bit of hammer to get it broken up. All in all I am very satisfy with the product. The product was made in Germany.
by
Nov 28, 2020
This is a high quality set of SDS Plus chisels. Made in Germany, they are more solid than rock. A...
This is a high quality set of SDS Plus chisels. Made in Germany, they are more solid than rock. Actually, fitted on your quality hammer drill, nothing will resist to their strength. Planning to take down those ugly tiles in your fixer-upper? This will feel like taking down sticky notes on the wall. Looking to break down that piece of concrete that it is too heavy to lift? That will feel like slicing bread, it's that good. Easy to clip and unclip. Highly durable. Really can't go wrong with those ones.
by
Nov 19, 2020
I received my Milwaukee 10 in. SDS plus demo bull point chisel and 10 in. SDS plus steel flat chi...
I received my Milwaukee 10 in. SDS plus demo bull point chisel and 10 in. SDS plus steel flat chisel. They came together in a 2 pack. These are made from high-grade forged steel which makes them very durable. They are ideal for starting holes and general chipping and breaking concrete. These are longer lengths instead of standard chisels for longer life. They are made in Germany which is a lot better than Chinese junk. Milwaukee tools are made with quality and will last a long time. They have a limited life time warranty.
by
Nov 12, 2020
I like the smaller size of these chisels. You can be more precise on what material you remove. I ...
I like the smaller size of these chisels. You can be more precise on what material you remove. I have used them to trim around holes I have made through walls that are bigger then the bits I have, or have to be shapes other then round.
I also found an unexpected use for them. Whoever tiles my bathroom didn't do I good job around the bathtub. So they filles is with a LOT of grout. The flat chisel did a great job of removing the mess. I then cut a triangle piece to fill in. The work it saved was worth the price of the chisel set all by itself.
by
Nov 10, 2020
Some time ago I brought a Milwaukee rotary hammer with several SDS drills. Over time I have added drills and chisels to my tool collection. I recently added two chisels, the 10inch, bull-nosed chisel and the 10inch flat chisel. I found these to be strong enough to do the jobs I required. The relatively narrow point on the bull-nosed allows for pinpoint accuracy when one doesn't want to demolish a lot of material. I used it to chip away the unsightly excess cement along my driveway pavers. The cement was meant to hold the pavers in place. I was able to chip away just enough material to allow the grass to grow up to the pavers but still hold them in place. The 10inch flat chisel is one of three I have used it in removing tile on my kitchen back splash and old floor tiles in my entry way. Of the three, the 3/4 inch wide, is what I used for removing the old thin set that was left behind when I removed the old tiles. With the proper angle and power of my hammer drill I was able to remove the old mastic without damaging the slab. Both of these chisels are German made from high grade forge steel and made to last a long time under strenuous conditions. In my rotary hammer manual it recommends placing a little high grade grease on the end of the drill or chisel before installing in the rotary hammer chuck. This grease came with my rotary hammer.
by
Nov 9, 2020
The Bull Point and Chisel Point chisels are well made and strong. They will remove whatever they...
The Bull Point and Chisel Point chisels are well made and strong. They will remove whatever they are engaged with. I used them to bust up concrete in a post hole. I have tile flooring to remove and will use them on that project next. They are sharp and made very well. Will stay put on target where placed. I will be buying more of these Milwaukee tools. They make the best and are provided thru Home Depot. Great product.
by
0/0