Model # 33333000

Internet #100376151

Store SKU #387256

Minwax 11.5 oz. Clear Satin Polycrylic Protective Finish Aerosol Spray
0027426333338

Minwax

11.5 oz. Clear Satin Polycrylic Protective Finish Aerosol Spray

$1196 /each

Choose Your Options

Number per Package
1
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Minwax Polycrylic Protective Finish is a protective topcoat for use on interior wood surfaces including furniture, trim, doors and cabinets. It can be used over bare wood and both oil-based and water-based stains. Polycrylic can be recoated in only 2 hours. Minwax Polycrylic resists damage from abrasion, scuffing, chipping, water, alcohol and other common household chemicals.
  • Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets
  • Covers 35 sq. ft.
  • Crystal clear finish
  • Ideal for use over light woods like maple, ash and birch as well as over Minwax water based wood stains
  • Aerosol spray makes application quick and easy
  • Ultra fast-drying- (2 hour)
  • Easy water clean up

Product Overview

Model #: 33333000
Sku #: 387256
Internet #: 100376151

Minwax Polycrylic Protective Finish is a protective topcoat for use on interior wood surfaces including furniture, trim, doors and cabinets. It can be used over bare wood and both oil-based and water-based stains. Polycrylic can be recoated in only 2 hours. Minwax Polycrylic resists damage from abrasion, scuffing, chipping, water, alcohol and other common household chemicals.

California residents: see   Proposition 65 information

  • Protects and adds beauty to interior wood surfaces including woodwork, furniture, doors and cabinets
  • Covers 35 sq. ft.
  • Crystal clear finish
  • Ideal for use over light woods like maple, ash and birch as well as over Minwax water based wood stains
  • Aerosol spray makes application quick and easy
  • Ultra fast-drying- (2 hour)
  • Easy water clean up

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Container Size
11.5 OZ-Ounce
Coverage Area (sq. ft.)
45

Details

Aerosol / NonAerosol
Aerosol
Application Method
Paint Sprayer
Coating Product Category
Waterproofer/Sealer
Dry to touch (min.)
180
Interior/Exterior
Interior
Number of coats recommended
2
Number per Package
1
Paint/Stain Base Material
Water
Paint/Stain Clean Up
Soap & Water
Paint/Stain Key Features
No additional features
Paint/Stain/Waterproofer Product Type
Shellac, Lacquer & Polyurethane
Sheen
Satin
Substrate/Surface Use Type
Wood
Time before recoating (hours)
2
Transparency
Clear

Warranty / Certifications

Manufacturer Warranty
N/A

Specifications

Dimensions

Container Size
11.5 OZ-Ounce
Coverage Area (sq. ft.)
45

Details

Aerosol / NonAerosol
Aerosol
Application Method
Paint Sprayer
Coating Product Category
Waterproofer/Sealer
Dry to touch (min.)
180
Interior/Exterior
Interior
Number of coats recommended
2
Number per Package
1
Paint/Stain Base Material
Water
Paint/Stain Clean Up
Soap & Water
Paint/Stain Key Features
No additional features
Paint/Stain/Waterproofer Product Type
Shellac, Lacquer & Polyurethane
Sheen
Satin
Substrate/Surface Use Type
Wood
Time before recoating (hours)
2
Transparency
Clear

Warranty / Certifications

Manufacturer Warranty
N/A

Questions & Answers

Can I use MixWax polycrylic on stove top which has been painted with stainless steel paint?

Can I use MixWax polycrylic on stove top which has been painted with stainless steel paint?
Asked by: Jerri
Hello. None of our products are recommended for use directly on a stove top. Regards, Minwax Customer Support
Answered by: MINWAX
Date published: 2017-05-25
  • y_2017, m_12, d_14, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_100376151, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 122ms
  • QUESTIONS, PRODUCT

Customer Reviews

11.5 oz. Clear Satin Polycrylic Protective Finish Aerosol Spray is rated 2.2 out of 5 by 13.
Rated 1 out of 5 by from Spit This is a horrible product. Their polyurethane spray doesn’t spit, but the polyacrylic is just downright horrible and far more expensive. I understand some folks hold the nozzle away from the project and then spray first. I do this with the polyurethane spray and even a spray gun. BUT with my experience, it did not matter. I ended up with spatter on the project. Minwax charges way too much for this horrible product. Polyurethane is much cheaper and is not much different than the acrylic finish. As a matter of fact, I say boycot the acrylic spray and just go for the polyurethane....They aren’t much different, trust me.
Date published: 2017-11-30
Rated 1 out of 5 by from The worse product ever made! Three out of four cans looked like I was using wall texture! Yes, I ... The worse product ever made! Three out of four cans looked like I was using wall texture! Yes, I read the instructions and shook the can for over 5 minutes and it just got worse. NEVER BUY OR USE THIS PRODUCT! Can't believe they have not pulled from the shelves.
Date published: 2017-09-28
Rated 4 out of 5 by from FINALLY FIGURED IT OUT.... It’s not the product itself that is the problem. It’s the instructions. I’m finishing a dining table. Stripped off the old stain down to bare wood. Put on a mahogany stain. Used 3 layers of the brush on polycrylic, but was getting brush lines. I figured I would use the spray version to get a smooth finish aftet a light sanding. I got many of the same bad results others were getting and following the instructions to the letter (spatters, light haze, debris on the finish, etc). Finally, I decided to just go crazy on the table with the can I had left.... If I’m going to have to refinish, might as well try something different.... And I’m glad I did. I realized a few things. If I started while aimed at a paper plate away from the project, the few spatters would go there, and then I sprayed with a continuous push, not stopping, and the spatters went away. Also, 12 inches is too far! The sweeping is important, but it has to be close and needs to make a thicker, “glue appearing” coat. That is how the painted on coats looked and they dried looking awesome minus the brush strokes because it dries so fast). So, the table now looks like it did when it was drying with the brush on coats, except it is smooth, and it is turning clear as it dries. The bigest thing to be careful about is scraping the surface with the can from holding it closer.... Will have to go sand and refinish a couple spots.... No big deal.... So, to conclude and summarize: —- start the spray away from project so the few beginning spatters miss the project, then —- spray continuously until the coat is complete —- hold it closer than 12” —- make a thick gluey coat —- don’t scrape with the bottom of the can I’ll post a pic once it dries.....
Date published: 2017-10-15
Rated 1 out of 5 by from Spits like a crazed monkey Unfortunate I can't give a zero star or, better, a negative 5 stars. This product not only spits like a crazed monkey (see other reviews), that spittle ruins the work you've done to get to this point in the refinish process. Water-based poly is fine, but applying it in spits and spurts actually destroys the previous steps you've done, such as stain, and forces you to take the wood back down to bare, just to clean up the spittle. DO NOT BUY THIS GARBAGE... use the liquid form and a brush.
Date published: 2016-08-04
Rated 1 out of 5 by from I followed directions but still got big globs about 30 seconds into spraying. It ruined my entir... I followed directions but still got big globs about 30 seconds into spraying. It ruined my entire kitchen table I was refinishing. This was supposed to be the last step...now I have to strip the entire table down again and waste $30 worth of stain and days of work.
Date published: 2017-05-18
Rated 1 out of 5 by from Dont buy I spray polyacrylic water based finish in my spray equipment on a regular basis and have very good results. I thought that by using the aerosol spray on a small project would be easy to use as I would not have to set up my spray equipment and then clean it. However, the aerosol spits and sputters large globules of finish all over. It is completely worthless and now I have to let it dry and sand it out. So much for easy. Do Not Buy.
Date published: 2015-07-26
Rated 1 out of 5 by from Terrible Product Followed the directions and it still spit and sputtered and ruined my project. Terrible!
Date published: 2015-09-02
Rated 4 out of 5 by from One Must Read Directions! Folks, if you read the directions even not-that-carefully, you will realize the "secret" to avoiding clogging in the sprayer tip; this polycrylic is a a form of plastic. Once it comes into contact with air, a chemical reaction begins. Chemicals gas-off and the result is hardening of the material. Thus, if you choose to avoid following the direction that states you should turn the can upside-down and spray until clear gas comes out, then you are simply asking for a clog to occur. I build guitars as a hobby and recently chose to venture into using water-based polyurethanes to finish them. I used the non-spray polycrylic as a rub-on and then used this after many coats and progressively finer sandings, and achieved a crystal-clear coat in one body session. Frankly, I am impressed at how well this compares to the highly toxic nitrocellulose lacquer that luthiers rave about. If you are for saving a bit of money, buy the polycrylic in the can and use with an HVLP spray gun on a higher volume setting and with a very low pressure setting. One disadvantage is that it does go on thick and dries to a tacky consistency very quickly. Test on scrap pieces of wood before your fine project! Wasting a small amount of a $12 product usually means nothing if it is to magnify the beauty of one's creation.
Date published: 2015-06-10
  • y_2017, m_12, d_14, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_, sid_100376151, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 136ms
  • REVIEWS, PRODUCT