#1 Home Improvement Retailer

Internet #303019963

Model #SCB0400D

Store SKU #1002720162

4 in. Dry Diamond Core Bit with 5/8 in. - 11 in. Thread

$7528
/piece
Store
0 in stock
Text to Me

Product Overview

DRY Diamond Core Bits - Monster Brand are designed to meet the demands of more and more core drilling applications right on the job sites. These high quality diamond core bits can be used both dry and wet on granite and concrete countertops. They can be used to drill porcelain tile very effectively if edge chipping is not a big concern.
  • 1/4 in., 3/16 in., 3/8 in. and 1/2 in. bits are non-core bits
  • 5/8 in. - 11 in. arbor fits standard polishers and grinders
  • Maximum speed for the bits are 4500 RPM
  • Use water to cool down the bit is highly recommend to extend their lives
  • 3.5 in. total length and 2.5 in. drilling depth
  • Both coring bits and smaller size non-coring bits have holes for center water cooling
  • Dry diamond core bits are durable and high quality

Specifications

Dimensions

Assembled Depth (in.)
3.5 in
Assembled Height (in.)
3.5 in
Assembled Width (in.)
4 in
Bit Diameter
4 in
Bit Length (in.)
3.5
Shank Diameter
5/8 in

Details

Bit Material
Diamond
Connection End Type
5/8 in. - 11 in.
Drill Bit Type
Coring Bit
Drill Bit Type(s) Included
Coring Bit
Individual/Set
Individual
Material Application
Brick,Ceramic Tile,Concrete,Fiberglass,Glass,Porcelain
Returnable
90-Day
Self-Feeding
No
Shank Style
Straight
Tools Product Type
Power Tool

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.3
    out of 11 reviews
  • 100% recommend this product
Filter by:
Showing 1-10 of 11 reviews
It worked great, did the trick in a few minutes....
It worked great, did the trick in a few minutes. HOWEVER, I was an idiot and didn’t read the description properly. Just looking at the picture, I assumed the skinny shaft went into my drill chuck and the larger end was the cutting head (like a hole saw). No, the skinny shaft is the cutting head and the larger end, lucky for me, is threaded and fit on my grinder. So, enough said :-)
by
  • Verified Purchase
Drilled well but one tang broke off on third hole It's...
Drilled well but one tang broke off on third hole It's good that there is a lot of diamond material but it makes the difference ants too long and I think that's why it broke. Not a big hang up or anything.
by
Response from ToolocityApr 12, 2021
Edward, sorry to hear that. Please contact us to replace the bit. Also please make sure that you do not drill with high speed (10000 rpm) in dry condition. This bit is designed to drill at lower speed (2000 - 4000 rpm) with a variable speed grinder or a polisher. Wet drilling is even better. Toolocity
  • Verified Purchase
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
  • Verified Purchase
Drilled 42 holes at 2" deep per hole and it...
Drilled 42 holes at 2" deep per hole and it still cuts like the day i got it.
by
  • Verified Purchase
5 Star Review
Rating provided by a verified purchaser
by
  • Verified Purchase
It’s OK - just be aware that it’s not 3/8”...
It’s OK - just be aware that it’s not 3/8” as advertised, but 10mm. Immaterial for most applications, but if you need an actual 3/8” bit...look further.
by
Response from ToolocityMar 9, 2020
Thanks for your comment. Yes the actual hole will be a little bigger than 3/8". Toolocity
  • Verified Purchase
Worked well.
Worked well.
by
  • Verified Purchase
  • Recommended
Held up to the heavy drilling in concrete that I needed it for. Has replaced the bit that we wer...
Held up to the heavy drilling in concrete that I needed it for. Has replaced the bit that we were buying
by
  • Verified Purchase
  • Recommended
Perfect ...
Perfect
by
  • Verified Purchase
Didn’t do the job I needed done ...
Didn’t do the job I needed done
by
Response from ToolocityOct 29, 2019
Sorry to hear that. Please let us know what you tried to drill through and we can definitely help. Our customer service number is 800-980-7808. Toolocity
  • Verified Purchase
Showing 1-10 of 11 reviews