Model # 411-16

Internet #202103458

Store SKU #412189

Motsenbockers 16 oz. Silicone Latex Caulk and Foam Sealant Remover
0077448411163

Motsenbockers

16 oz. Silicone Latex Caulk and Foam Sealant Remover

$898 /each

Product Overview

Motsenbockers Lift Off 16 oz. Spray Foam & Silicone Caulk Remover breaks the molecular bond for fast and easy removal of polyurethane sealants, expansion foams, silicone caulks, construction adhesives and two-part epoxies from tub and shower enclosures, vinyl flooring, baseboards, tile, porcelain, stainless steel, cast iron, wood, granite, marble, ceramic and stone. The patented, Enviro Science formula is biodegradable, water-based and non-corrosive.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Motsenbockers Lift Off 16 oz. Spray Foam & Silicone Caulk Remover breaks the molecular bond for fast and easy removal of polyurethane sealants, expansion foams, silicone caulks, construction adhesives and two-part epoxies from tub and shower enclosures, vinyl flooring, baseboards, tile, porcelain, stainless steel, cast iron, wood, granite, marble, ceramic and stone. The patented, Enviro Science formula is biodegradable, water-based and non-corrosive.
  • For indoor and outdoor use
  • Removes fresh or cured sealants
  • Water-based gel formula
  • Biodegradable
  • Non-corrosive
  • Low-VOC formula
  • Look for how-to videos from Mötsenböcker’s Lift Off on YouTube
  • Subject to or will include a recycling fee in the following sates: CA or, CT
  • Note: product may vary by store

Product Overview

Model #: 411-16
Sku #: 412189
Internet #: 202103458

Motsenbockers Lift Off 16 oz. Spray Foam & Silicone Caulk Remover breaks the molecular bond for fast and easy removal of polyurethane sealants, expansion foams, silicone caulks, construction adhesives and two-part epoxies from tub and shower enclosures, vinyl flooring, baseboards, tile, porcelain, stainless steel, cast iron, wood, granite, marble, ceramic and stone. The patented, Enviro Science formula is biodegradable, water-based and non-corrosive.

  • For indoor and outdoor use
  • Removes fresh or cured sealants
  • Water-based gel formula
  • Biodegradable
  • Non-corrosive
  • Low-VOC formula
  • Look for how-to videos from Mötsenböcker’s Lift Off on YouTube
  • Subject to or will include a recycling fee in the following sates: CA or, CT
  • Note: product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Size (oz.)
16

Details

Biodegradable
Yes
Combustible
No
Concentrated
No
Flammable
No
Indoor/Outdoor
Indoor/Outdoor
Interior/Exterior
Exterior,Interior
Materials removed
Caulk
Odorless
No
Paint Product Type
Paint Cleaners and Removers
Product Dispenser Type
Plastic Bottle
Product Form
Gel
Rinse required
Yes
Types of Surfaces Cleaned
Multi-Purpose

Warranty / Certifications

Manufacturer Warranty
1 Year of manufacture date

Specifications

Dimensions

Product Size (oz.)
16

Details

Biodegradable
Yes
Combustible
No
Concentrated
No
Flammable
No
Indoor/Outdoor
Indoor/Outdoor
Interior/Exterior
Exterior,Interior
Materials removed
Caulk
Odorless
No
Paint Product Type
Paint Cleaners and Removers
Product Dispenser Type
Plastic Bottle
Product Form
Gel
Rinse required
Yes
Types of Surfaces Cleaned
Multi-Purpose

Warranty / Certifications

Manufacturer Warranty
1 Year of manufacture date

Questions & Answers

Is this product safe to use on plexiglass?

Is this product safe to use on plexiglass?
Asked by: Ryan
Yes, the Motsenbocker's Lift Off Silicone Latex Caulk and Foam Sealant Remover is safe to use on Plexiglas.
Answered by: Craig
Date published: 2017-09-17

Is this safe for use on Corian?

Is this safe for use on Corian?
Asked by: M1
Corian is a man-made material that includes an acrylic polymer component. Even though Motsenbocker's Lift Off Silicone Latex Caulk and Foam Sealant Remover is used on a variety of surfaces, it is not recommended for some surfaces, including Formica. However Corian is considered a very durable surface. It is best to test Lift Off first in an inconspicuous area. As a precaution, you may also want to mask off areas of the Corian surface where Lift Off is to be used.
Answered by: Craig
Date published: 2017-08-12

How to clean up afterwards

Asked by: David
After using Motsenbocker's Lift Off Silicone Latex Caulk & Foam Sealant Remover to remove unwanted caulk and sealant, you can wash the area with soap and water using a sponge or clean cotton towel.
Answered by: Craig
Date published: 2017-05-15

Is this product safe on fiberglass skin of RV?

Is this product safe on fiberglass skin of RV?
Asked by: lel
Yes, you can use this product on fiberglass.
Answered by: CommunityAnswer
Date published: 2017-02-27
  • y_2017, m_11, d_23, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_, sid_202103458, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 95ms
  • QUESTIONS, PRODUCT

Customer Reviews

16 oz. Silicone Latex Caulk and Foam Sealant Remover is rated 3.4 out of 5 by 33.
Rated 5 out of 5 by from I have a porcelain tub with really old caulking and decided to try Lift Off to remove it.  I alwa... I have a porcelain tub with really old caulking and decided to try Lift Off to remove it.  I always believe in being prepared and purchased the product in a 16 ounce bottle, plus a scraper and some cloth towels.  I sprayed directly on to the caulking and around the edges and made sure it was fully covered.  Then I let it set for 5-10 minutes.  I used the scraper and it took off the caulking.  I used the cloth towel to wipe it off the tub.  It was way easier than I expected.  Cool stuff!
Date published: 2017-07-17
Rated 5 out of 5 by from Product really works well if you follow the directions. I had dried caulk on some woodwork after... Product really works well if you follow the directions. I had dried caulk on some woodwork after a sliding glass door replacement and the installers did not clean up well, seemed to be in a hurry doing the caulking. Applied this product, let it sit per the directions, used a toothbrush to agitate it and it lifted right off. Because the woodwork was stained and sealed, I used a light coating of Murphy's oil soap after cleaning off this product. Looks fantastic now. I would recommend this caulk remover for any dried caulk.
Date published: 2016-12-30
Rated 1 out of 5 by from The product is a total looser I sprayed waited three... The product is a total looser I sprayed waited three days and not one drop loosen the caulk The company ads are false every word
Date published: 2017-10-03
Rated 5 out of 5 by from It worked great for me! I see a couple of people here saying that it didn't work for them. All I can say is that it worked incredibly well for me when I was re-caulking my bathroom. I don't know whether the old caulk was silicone or latex, but after spraying it and letting it sit for around 20-30 minutes, it all pretty much turned to jelly and came off very easily with a caulk tool. It turned so soft that much of the old caulk could be wiped up with a paper towel. Also, I don't know how hazardous the spray is, but it had a pleasant smell and didn't seem to irritate my hands at all. I removed all the old caulk from around the tub and shower, toilet and sink and only used about half the spray bottle.
Date published: 2012-07-09
Rated 5 out of 5 by from Saved my bacon! I had to redo the former owner’s apocalyptic caulk job. (Well, I /think/ he tried to caulk the bathroom tile—from the caulk spattered at least to the second tile from every joint, it’s possible that his hyperactive four-year-old twins had a caulk gun battle during bathtime.) To say that I had to remove a large quantity of misapplied silicone is like saying many people lost their lives in WWII. This product turned a martyrdom of a job into mere torture with an end in sight. Pump slowly; patience is a virtue.
Date published: 2016-08-23
Rated 4 out of 5 by from Works best overnight First off, pump spray did not work. I poured the product into a small container and brushed it on with a chip brush. It spreads very well. Originally let the product set for 1/2 hour after applying. Began removing silicon caulk. It was still difficult to remove. I re-applied more product, covered with plastic sheet and let it sit overnight. Caulk became the consistency of very thick jelly. Most of the caulk came out in chunks. The rest came out with a scrub brush and water. Pleased with the eventual performance, after letting it work on the caulk overnight.
Date published: 2015-03-06
Rated 3 out of 5 by from Be careful, it's strong. Applied to 14 year old caulk around exterior aluminum window with baked enamel paint and stucco walls. In just a few minutes this began to soften the caulk, and the paint on the window as well. It also appeared to soften the stucco (which may be a synthetic stucco). Just be careful when using this product. It clearly tells you to try it first in an out of the way spot to make sure it doesn't harm the painted surfaces. As others have said, just put this in a small container and apply with a brush. Too thick to pump.
Date published: 2016-04-21
Rated 4 out of 5 by from Forget about using this as a spray Open the bottle and transfer the product to a glass jar for actual use with a small hobby paintbrush. The product is thick and about as soupy as the old mucilage we used to use in kindergarten -- there's no chance of applying it with a spray bottle. I cannot for the life of me imagine how it ended up in this packaging. I apparently put this through about the hardest test possible by using it on a thick, sloppy bead of GE Silicone II 100% Silicone that had been cured for two weeks. I used it on an aluminum-framed shower door caulked to granite tile. The product got the job done, barely. The 2-3 minutes recommended became 10-15 minutes. It did not do any harm to the finish on the aluminum door frame. It did not discolor the granite. The caulk came off in pieces, with difficulty. I used a metal scraper and a razor blade for most of the job. I suspect I'll never several applications and at least two hours of work that includes brushing with an extra-stiff grout brush to get it all off. I'm still giving it four stars. It got the job done on the toughest bathroom caulk you can buy and saved my bacon.
Date published: 2016-04-08
  • y_2017, m_11, d_24, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_33
  • loc_, sid_202103458, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 114ms
  • REVIEWS, PRODUCT