5-Tier Boltless Steel Garage Storage Shelving Unit in Silver Vein (48 in. W x 72 in. H x 24 in. D)
$178.74
Pay $153.74 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Boltless garage shelving unit boasts a study steel construction
- Adjustable shelves hold up to 800 lbs per shelf
- Boltless design allows for quick assembly
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Specifications
Dimensions: H 72 in, W 48 in, D 24 in
Questions & Answers
5
1858
4
739
3
245
2
167
1
270
Nov 11, 2023
exactly as described
They hold a decent amount of weight and they’re super easy to assemble. They are the perfect dementions to stack 40 gallon breeder tanks. I bought one shelving unit to hold those 4 tanks but i have extra parts, so if i buy a 2nd unit. I could assemble 5 of these racks holding 10 40 gallon tanks. Very cool.
by
Jul 26, 2023
This is HD best rack for the money. High quality finish, sufficient shelves. Easy assembly too. Holds heavy auto parts no problem.
by
May 20, 2023
Missing parts
It woyld be a good purchase if we had all the pieces. Very frustrating to start building it just to find out all pieces sre not included
by
Nov 12, 2021
Hard to install
Hard to put together even with help, no matter how hard you hammer the shelf together it pretty much falls apart every time. Took us 2 hours to assemble it properly. Works great for small spaces.
by
May 4, 2021
The shelving was sturdy ,the product offered quality as well as fairly priced. However the dire...
The shelving was sturdy ,the product offered quality as well as fairly priced.
However the directions were a little tough to understand as they weren't very specific or clear in regards to the positioning of the shelving after a couple of attempts of trying to configure the side arms once it was figured the assembly was relatively easy. One note to the side brackets that hold the shelving if they did not properly set themselves up you definitely needed to use the hammer or mallet to set them in place.
I was able to store a lot of items on the shelving unit which definitely serve the purpose it took me a couple hours to put the shelving together but like I said before once you figure out the configuration it was very easy to assemble
by
Dec 17, 2020
I bought the 60 x 72 x 24 model Nov 2020 and it is terrific. Required a rubber mallet and a block...
I bought the 60 x 72 x 24 model Nov 2020 and it is terrific. Required a rubber mallet and a block of 2x4 to help really secure the shelves to the frame. Once together (I did it by myself), it looks great and is sturdy enough. Took about 1 hour to assemble and I found a 2' step stool was needed to do the top shelf (I am 6' tall). It was shipped to me VERY quickly after placing the online order despite the apparent shortage of the product. Guess I got lucky to find one. Easily supports everything I've stored on it (which isn't a lot - yet...) and my shed is very nicely organized now. I did find it helpful to put wood shelving on some of the wire decking for stuff that would have wobbled about. It probably would have been fine without the wooden shelves, but I already had them lying around so why not use them. Good stuff!
by
Sep 9, 2020
Easy to assemble if you have all the parts
I got the 30x60x12 and it fits perfectly in my new tool shed. I chose a version with the particle board shelves (I'm leery about the wire shelves). No issues in assembly except that it was without 4 of the corner posts. Home Depot was no help at all, but after contacting Sandusky, they shipped the replacement posts to me quickly. Hey, where are you going to find a decent shelf for less $?
by
Aug 28, 2020
Great Product, easy to install, my box was missing the couplers, called Edsal Customer Service, t...
Great Product, easy to install, my box was missing the couplers, called Edsal Customer Service, they were very quick to mail the couplers to me and was able to get the install completed. The product has improved from the last time when I had bought a similar Edsal product a few years back
by
Aug 10, 2020
Per review guidelines I am giving 4.5 stars on quality and 5 on values. While the posts and beam...
Per review guidelines I am giving 4.5 stars on quality and 5 on values. While the posts and beams can be built with more heavy gauged metal, it is more than adequate for home use. I assembled it myself and I do think a 2nd person will help speeding up. "No-tool assembly" is not accurate, I have to hammer the pins down with a piece of wood and a rubber mallet.
The mesh shelves are attractive and hold 3 plastic bins per shelf (my previous 18x48x69 stainless steel wire shelving unit can only do 2). This one is lot cheaper than the stainless steel wire one I replaced and moved to laundry room.
Against the review guidelines I have to complaint about shipping/packing. If I am allowed to review that, it is 1-2 stars. I didn't have a choice but to ship to my home as it is unavailable in store. Don't trust the packing material and handling from UPS. I think I may have received an open-boxed unit as the braces and couplers were loose inside the big box which was wrapped with excessive amount of packing tapes. Home Depot Customer Service is very good and the rep engaged MuscleRack to ship me the missing couplers. At the end, I am very happy with the resolution and gotten myself a nice new shelving.
by
Aug 10, 2020
Easy To Assemble, Shelves Not Strong Enough
Despite the ease of assembly the unit has a major design flaw - The manner in which the pressed wood composite shelves sit on the rails. If you place any object that weighs over 15 pounds on the wooden shelf, the shelf starts to bow and sink below the rails. I had to drill out the rails and bolt L brackets to the rails to support the wooden shelves. Maybe this product should come with a warning to customers describing the weight limitations of the shelves.
by
Customer review from homedepot.ca0/0
Compare Similar Items
Assembled Width (in.) | |||
|---|---|---|---|
48 in | 36 in | 48 in | 77.00 in |
Assembled Depth (in.) | |||
24 in | 18 in | 24 in | 24.00 in |
Shelf Material | |||
Wood | Wood | Wood | Steel |
Number of Shelves | |||
5 | 5 | 5 | 4 Tiers |
Shelf Type | |||
Solid | Solid | Solid | Wire |
Related Searches
Related Products
The Edsal SR100-GY 5-shelf standing shelf unit has a steel rack and shelves made of particle board to support a 500 lb. per shelf capacity and to support a 2500 lb. total capacity when the weight is distributed evenly across all shelves. The corner post tab slots on this unit are punched at 1-1/2 in. intervals for precise installation of shelves at desired heights. The steel rack has a gray enamel finish to resist corrosion. The posts on this unit have a 2-piece design so it can be assembled vertically to create one 72 in. x 36 in. x 18 in. (H x W x D) unit, or assembled horizontally to create one 36 in. x 36 in. x 18 in. unit with 2 shelves and one 36 in. x 36 in. x 18 in. unit with 3 shelves. This shelf unit has a tab and slot design for boltless assembly. Assembly instructions are included. A rubber mallet (sold separately) and small screwdriver (sold separately) are recommended for assembly. Standing shelf units are commonly used to store items to help create organized, efficient and safer work areas. These systems typically consist of a frame or rack with open shelves. Added components such as casters, wheels, or handles are used for applications that require mobility. Standing shelf units are used in a variety of office, industrial, educational and residential settings. Edsal Manufacturing Company manufactures storage systems and industrial furniture. The company, founded in 1952, is headquartered in Chicago, IL.
The durable steel construction of the Muscle Rack 72 in. 5-shelf can easily hold up to 2,500 lbs. The 5-shelf unit has adjustable shelves every 1-1/2 inches. You can assemble this Muscle Rack heavy duty steel shelving unit vertically as shelves or horizontally as a workbench. Includes laminate shelves that make clean up easy and resist moisture and features a rivet lock system that provides strength and rigidity.
You can assemble this Edsal heavy duty steel shelving unit vertically as shelves or horizontally as a workbench for your office or home. Its neutral color goes with everything in your home. You can adjust this multi-purpose unit's shelves in 1.5 in. increments to fit any storage need. It features a rivet lock system that provides strength and rigidity.
When inspiration strikes for your next home improvement project, camping trip, band practice or artistic masterpiece, make sure your gear is ready to go. The 48 in. wide Gladiator EZ Connect Rack Shelving unit gives you a place to keep hardware, tools, gear, music equipment, art supplies and more, ready whenever you need them. It's easy for one person to assemble this freestanding rack quickly and without tools, thanks to its innovative click-and-lock system. Plus, a durable steel frame and laminate shelves that are easy to clean and maintain ensure you can rely on it to help you stay organized for years.