Internet #100377387

Model # FWAS24

Store SKU #209678

0052063003207

24 in. Plastic Storm Water Leaching System

  • Each unit holds 50 gal., over 50% more than a traditional drywell
  • Flo-Well units collect, retain, and discharge stormwater on-site.
  • A gravel free alternative to a traditional dry well.
$ 79 01
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Each unit holds 50 gal., over 50% more than a traditional drywell
  • Flo-Well units collect, retain, and discharge stormwater on-site.
  • A gravel free alternative to a traditional dry well.
The NDS Flo-Well is a manufactured dry well that is an easy to install and sustainable solution for storm water runoff. Used independently or as part of a larger storm water management system, Flo-Well units collects, retains and filters storm water naturally through subsurface, reducing pollutants and helping to replenish ground water tables by discharging storm water on site. NDS Flo-Well is easy to install, offering an alternative to a traditional dry well. No heavy equipment required.
  • Each Flo-Well unit holds approximately 50 gallons of storm water, over 50% more than a traditional drywell
  • Units are modular and can be connected in series or stacked to meet a variety of project needs and accommodate higher volumes of water.
  • Flo-well comes with 3 interlocking side panels and a lid, optional bottom sold separately
  • Uses less gravel to install and haul to site
  • Optional Bottom Panel, Filter Fabric, and Surface Drain Inlet can be purchased separately and used with the Flo Well for options in a leaching system
  • Manufactured from 100% recycled plastic
  • Additional units can be connected in series to accommodate higher volumes of water
  • Surface inlet and filter fabric wrap are also available but would have to be purchased separately
  • California residents see Prop 65 WARNINGS

Product Overview

  • Each unit holds 50 gal., over 50% more than a traditional drywell
  • Flo-Well units collect, retain, and discharge stormwater on-site.
  • A gravel free alternative to a traditional dry well.
Model #: FWAS24
Sku #: 209678
Internet #: 100377387

The NDS Flo-Well is a manufactured dry well that is an easy to install and sustainable solution for storm water runoff. Used independently or as part of a larger storm water management system, Flo-Well units collects, retains and filters storm water naturally through subsurface, reducing pollutants and helping to replenish ground water tables by discharging storm water on site. NDS Flo-Well is easy to install, offering an alternative to a traditional dry well. No heavy equipment required.

  • Each Flo-Well unit holds approximately 50 gallons of storm water, over 50% more than a traditional drywell
  • Units are modular and can be connected in series or stacked to meet a variety of project needs and accommodate higher volumes of water.
  • Flo-well comes with 3 interlocking side panels and a lid, optional bottom sold separately
  • Uses less gravel to install and haul to site
  • Optional Bottom Panel, Filter Fabric, and Surface Drain Inlet can be purchased separately and used with the Flo Well for options in a leaching system
  • Manufactured from 100% recycled plastic
  • Additional units can be connected in series to accommodate higher volumes of water
  • Surface inlet and filter fabric wrap are also available but would have to be purchased separately
  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Key Features

Product Overview
Key Features
  • Each unit holds 50 gal., over 50% more than a traditional drywell
  • Flo-Well units collect, retain, and discharge stormwater on-site.
  • A gravel free alternative to a traditional dry well.
The NDS Flo-Well is a manufactured dry well that is an easy to install and sustainable solution for storm water runoff. Used independently or as part of a larger storm water management system, Flo-Well units collects, retains and filters storm water naturally through subsurface, reducing pollutants and helping to replenish ground water tables by discharging storm water on site. NDS Flo-Well is easy to install, offering an alternative to a traditional dry well. No heavy equipment required.
  • Each Flo-Well unit holds approximately 50 gallons of storm water, over 50% more than a traditional drywell
  • Units are modular and can be connected in series or stacked to meet a variety of project needs and accommodate higher volumes of water.
  • Flo-well comes with 3 interlocking side panels and a lid, optional bottom sold separately
  • Uses less gravel to install and haul to site
  • Optional Bottom Panel, Filter Fabric, and Surface Drain Inlet can be purchased separately and used with the Flo Well for options in a leaching system
  • Manufactured from 100% recycled plastic
  • Additional units can be connected in series to accommodate higher volumes of water
  • Surface inlet and filter fabric wrap are also available but would have to be purchased separately
  • California residents see Prop 65 WARNINGS

Product Overview

  • Each unit holds 50 gal., over 50% more than a traditional drywell
  • Flo-Well units collect, retain, and discharge stormwater on-site.
  • A gravel free alternative to a traditional dry well.
Model #: FWAS24
Sku #: 209678
Internet #: 100377387

The NDS Flo-Well is a manufactured dry well that is an easy to install and sustainable solution for storm water runoff. Used independently or as part of a larger storm water management system, Flo-Well units collects, retains and filters storm water naturally through subsurface, reducing pollutants and helping to replenish ground water tables by discharging storm water on site. NDS Flo-Well is easy to install, offering an alternative to a traditional dry well. No heavy equipment required.

  • Each Flo-Well unit holds approximately 50 gallons of storm water, over 50% more than a traditional drywell
  • Units are modular and can be connected in series or stacked to meet a variety of project needs and accommodate higher volumes of water.
  • Flo-well comes with 3 interlocking side panels and a lid, optional bottom sold separately
  • Uses less gravel to install and haul to site
  • Optional Bottom Panel, Filter Fabric, and Surface Drain Inlet can be purchased separately and used with the Flo Well for options in a leaching system
  • Manufactured from 100% recycled plastic
  • Additional units can be connected in series to accommodate higher volumes of water
  • Surface inlet and filter fabric wrap are also available but would have to be purchased separately
  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Max. Compatiible Pipe Size (In.)
4"
Min. Compatible Pipe Size (In.)
4"
Product Depth (in.)
24
Product Height (in.)
28.75
Product Width (in.)
24

Details

Color Family
Black
Color/Finish
Black/Matte
Grate Shape
Round
Material
Plastic
Pipe or Fitting Product Type
Accessory
Product Weight (lb.)
20.72lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
Limited Lifetime

Specifications

Dimensions

Max. Compatiible Pipe Size (In.)
4"
Min. Compatible Pipe Size (In.)
4"
Product Depth (in.)
24
Product Height (in.)
28.75
Product Width (in.)
24

Details

Color Family
Black
Color/Finish
Black/Matte
Grate Shape
Round
Material
Plastic
Pipe or Fitting Product Type
Accessory
Product Weight (lb.)
20.72lb
Returnable
90-Day

Warranty / Certifications

Manufacturer Warranty
Limited Lifetime

Questions & Answers

Can you install the product as is without any drainage pipes attached as a dry well?

I have standing water in a concentrated area in my back yard and it drains after a normal rain event.
Asked by: Tete
It will be useless without using the drain pipe that is long enough to drain the water away from the water pooling area.
Answered by: Les
Date published: 2019-03-20

If installed as per the manufacturer's instructions, can I drive my riding lawnmower over it?

If installed as per the manufacturer's instructions, can I drive my riding lawnmower over it?
Asked by: Jose
The Flo Well unit can take the weight of a riding lawn mower. The cover over the unit should be a minimum of 8" to properly support the load.
Answered by: Dr. Drainage
Date published: 2019-01-28

Instead of a pop-up valve on the top, can I install a short pice of pipe from the top row of knoc...

Instead of a pop-up valve on the top, can I install a short pice of pipe from the top row of knock-outs, add 90 degree elbow and then the pop-up valve so that in case of an overflow water can be discharged closer to the curb?
Asked by: Jose
You can add an elbow with a short piece of pipe to move the outlet to another location.
Answered by: Dr. Drainage
Date published: 2019-01-28

Can this be used as drywell for greywater for laundry and dishwater?

Can this be used as drywell for greywater for laundry and dishwater?
Asked by: Dakota
Yes,check local codes
Answered by: NurseMary
Date published: 2018-05-06
  • y_2019, m_10, d_18, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_64
  • loc_, sid_100377387, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 8ms
  • QUESTIONS, PRODUCT

Customer Reviews

NDS 24 in. Plastic Storm Water Leaching System, Black/Matte is rated 4.3 out of 5 by 87.
Rated 4 out of 5 by from good This kit is composed of 4 pieces, top and 3 curved pieces that slip together and lock in place. Once assembled and in place it was durable, getting the top to lock in place was a bit tricky. All the complaints about knocking the holes out are overrated. Double check where your knock outs for the inlet and outlets will fall, due to the 3 piece nature of the bottom pieces you need to pay attention to get the inlet and outlet 180 deg away from each other. My overflow ended up at about 135 deg from the inlet. I didn't use the top overflow option. I stapled the filter fabric directly to the unit before i put it in the hole, was easier than trying to do it after. I also used the drainage pipe with the integral sock and packing peanuts for the last section of pipe before the dry well to increase capacity. This is connected to trench drains around my foundation, heavy rains have caused some temporary puddling around the foundation, but the overflow on the drywell has never been needed. Works well.
Date published: 2016-08-29
Rated 5 out of 5 by from All the knockout are for a 4" line. Would be nice if they would have knockouts that were for 3" ... All the knockout are for a 4" line. Would be nice if they would have knockouts that were for 3" drain line like most down spouts are. I dug the pit deep enough to discharge into the top. I used my hole saw to cut a 3-1/2" hole for the down spout pipe. Note you should buy a roll of weed block to wrap the unit before back filling.
Date published: 2019-07-23
Rated 4 out of 5 by from Good product, easy to assemble, pain to dig the proper... Good product, easy to assemble, pain to dig the proper size hole without a renting an auger, I do NOT recommend digging by hand if you need to do more than 1, or at least get a few people to help, I have very clay-heavy soil, and it is difficult to dig through, so this may not be an issue for some..
Date published: 2019-08-20
Rated 4 out of 5 by from Only time will tell how effective this system works, but... Only time will tell how effective this system works, but the quality of the unit seems quite good. It also went together easily, and installation into our sandy soil was not very difficult. All in all, I would buy it again once I see how it works in a heavy downpour.
Date published: 2019-08-20
Rated 5 out of 5 by from So far, only two weeks post installation, it is working... So far, only two weeks post installation, it is working well. Since it is underground I cannot add an image.
Date published: 2019-08-20
Rated 5 out of 5 by from Use an exacto razor blade to trim drain holes!! Easy! I found myself listening to the reviews needing hole saws and hammers. I cracked the plastic in one spot and stopped. I thought this is crazy it can't be this tough to knock out the side drain holes! My landscaper pulled out his box cutter and lightly trimmed or cut around the "knock-out holes". It took him just a few minutes. I think we overly complicate things sometimes. .......For the DIY'er, just remember to not shove or force a razor blade or box cutter.... when you do, the blade can snap and the force behind your arm could swing the remaining blade over and cut you. Trim pointing away from your person and don't get impatient. Trying to force it could have you spending money at the doctor. Otherwise it went easy after I stopped trying to use force.
Date published: 2014-06-03
Rated 5 out of 5 by from Solved my sidewalk drainage problem I had a drainage problem next to a paver sidewalk every spring after the snow melted and during heavy rain storms. Due to poor grading of the yard there really wasn't anywhere for the water to go. I installed this and added the top grate. We had a couple of down pours since the install and it is working great. The water no longer floods the sidewalk as the area in the yard where the water used to collect now drains properly.
Date published: 2014-10-19
Rated 4 out of 5 by from Easy way to install a dry well Purchased this to simplify installing the dry well for a backyard drainage system. Product is easy to assemble. Agree with other reviews that the knockouts are hard to get out. For the small knockouts I just used a hole saw. The larger (4 inch) knockouts come out easy if you support the panel so it can't flex and use a proper sized (large) hammer. For light traffic installations the instructions say you can use SDR 35 PVC for reinforcement which is partially correct. The top is actually sized to align with the belled (large) end of SDR 35 pipe and the same is true for the Bottom Panel. I ended up installing a coupling so both ends would match up and not flop around during installation. Also instructions on how to install the bottom panel are nonexistent except for a single diagram.
Date published: 2014-12-10
  • y_2019, m_10, d_18, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_87
  • loc_, sid_100377387, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • REVIEWS, PRODUCT