Internet #204196302

Model #N241-190

3-1/2 in. Door Hinge in Black

Frequently Bought Together

+
+
Price:
$232

Product Overview

Stanley-National Hardware has been a leading manufacturer of hardware for more than a century. Over the course of the last 160-plus years, Stanley-National is a name that has become synonymous with quality, innovation, and customer service. With a wide array of finishes and corner options, there's a Residential Hinge application ideally suited to fit your interior project needs.
  • Removable pin for easier installation or removal of doors
  • Heavy-gauge cold-rolled steel for added strength
  • Nib on hinge for finished appearance
  • Five knuckle, full mortise design
  • Square corners
  • Screw holes are countersunk
  • Black finish
  • LifeSpan limited lifetime warranty
  • Includes mounting screws

Compare Similar Door Hinges

current product
3-1/2 in. Door Hinge in Black
3.5 in. x 3.5 in. Brushed Chrome Plain Bearing Steel Hinge (Set of 2)3 in. x 3 in. Satin Brass Plain Bearing Steel Hinge (Set of 2)3.5 in. x 3.5 in. Satin Nickel Plain Bearing Steel Hinge (Set of 2)
BrandNational HardwareGlobal Door ControlsGlobal Door ControlsGlobal Door Controls
Name3-1/2 in. Door Hinge in Black3.5 in. x 3.5 in. Brushed Chrome Plain Bearing Steel Hinge (Set of 2)3 in. x 3 in. Satin Brass Plain Bearing Steel Hinge (Set of 2)3.5 in. x 3.5 in. Satin Nickel Plain Bearing Steel Hinge (Set of 2)
Price
$232
Add to Cart to See Price
$305
/set
$425
/set
Ratings
(34)
(35)
(4)
(35)
Hardware Finish FamilyBlackSilverSilverSilver
Hinge TypeFlushSurface mountSurface mountSurface mount
MaterialSteelSteelSteelSteel
Hinge RadiusSquareSquareSquareSquare
Hinge FeatureNo Hinge FeatureMounting Hardware IncludedMounting Hardware IncludedMounting Hardware Included
FinishBlack FinishBrushed ChromeSatin BrassSatin Nickel
Commercial/ResidentialResidentialResidentialResidentialResidential
Builders Hardware Product TypeDoor HingeDoor HingeDoor HingeDoor Hinge
Mounting TypeWallWallWallWall
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
3.5
Product Height (in.)
3.5
Product Width (in.)
3.5

Details

Builders Hardware Product Type
Door Hinge
Commercial/Residential
Residential
Fasteners included
No
Finish
Black Finish
Hardware Finish Family
Black
Hinge Feature
No Hinge Feature
Hinge Radius
Square
Hinge Type
Flush
Hole Pattern
Half Moon
Holes
6
Interior/Exterior
Interior/Exterior
Material
Steel
Mounting Type
Wall
Mounting Type
Surface Mount
Package Quantity
1
Pin type
Removable Pin
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
LifeSpan Limited Lifetime Warranty

Questions & Answers

15Questions14Answers

Can the pin be taken out to remove the door or do you have to remove the whole hinge?

Asked by Mar June 11, 2020
1
Answer

Yes, pin removal is possible.

If using a spring hinge on a screen /storm door, does it still need the air pump closing device or do these hinges do it

Asked by Pam October 23, 2019
1
Answer

You can use two of these hinges or the air pump (closer), either item

I have a very heavy door weighing ~ 180 pounds, can 3 of these hold it?

Asked by Joe September 29, 2019
1
Answer

Safe working load is 70 pounds each. For doors 36" wide, 80" tall.

are they water resistant will they rust in less then 5 years

Asked by vic September 18, 2019
1
Answer

No, it is not water-resistant.

What does "5/8" radius rounded edge" mean? I can see rounded edge- but what does the entire state...

Asked by Chance July 7, 2018
1
Answer

It refers to the edges being rounded, not square. Also it is 5/8".

Is this hinge fire rsted3

Asked by Cole July 5, 2018
3
Answers

I would say it is, it’s all metal and heavy.

Will this hinge be too wide for a 1 3/8" thick door? Thanks.

Asked by RB September 12, 2017
0
Answers

Does the pin not remove at all?

Asked by Beep July 2, 2017
2
Answers

The pin will not remove

How to install and adjust.

Asked by JoesGoogle October 6, 2016
3
Answers

just use the allen wrench that came with it to tighten each hinge, you need to tighten about a 1/4 inch turn at a time you will feel it grab.

door hinge width, is that total width or just one side?

Asked by graybeard August 20, 2015
1
Answer

It is the total of the width product.

3-1/2 in. Door Hinge in Black - page 2

Customer Reviews

  • 4.3
    out of 34 reviews
  • 80% recommend this product
5star-icon21
4star-icon7
3star-icon1
2star-icon2
1star-icon3
Filter by:
Showing 1-10 of 34 reviews
These hinges was exactly what we were looking for the fit perfectly and they look great. Thanks
These hinges was exactly what we were looking for the fit perfectly and they look great. Thanks
by Doug
The pin is not removable
Even though it says that the pin is removable, it is not. If that's important to you, like if you want to install a door stop that's held in by the pin, don't buy these for that. Other than that, they're fine. But when the package specifically says "removable pin," and the pins can't be removed, that's a big problem.
by Imjustadoorboy
Response from NationalHardwareJul 20, 2020
Hello Imjustadoorboy,
We appreciate your feedback, and we're truly sorry to hear about your experience with the door hinge. We apologize for your trouble, and we'd like the opportunity to make things right with the correct solution. Can you please give our Support Team a call at 1-800-346-9445 option 3? We hope to hear from you soon!
Thank you,
National Hardware NationalHardware
Replacing same spring that lasted 25 years. Hope to get...
Replacing same spring that lasted 25 years. Hope to get same use from this one. Solid build quality.
by EGguy
The right product with right price!Thank you!...
The right product with right price!Thank you!
by Harry
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by Tony
Nice item but it doesn’t completely close my door into...
Nice item but it doesn’t completely close my door into the latch. I may need another.
by Slis
I also did not get the "Detailed Instructions" like other have pointed out, I have a feeling mine...
I also did not get the "Detailed Instructions" like other have pointed out, I have a feeling mine was a return because it was already tensioned out of the package. If you happen to be in a similar situation the key is to insert the hex wrench into the top and without turning press it in further. It acts as a button and will eventually disengage the torsion spring and allow the hinge to open so it can be installed like any normal hinge. Once I got past that everything went normal, over all its a descent hinge.
by Chris
Fits perfect, works perfect, easy adjustments
Fits perfect, works perfect, easy adjustments
by Jo
Worked great.
Worked great.
by bill99
Super sturdy and attractive hardware. ...
Super sturdy and attractive hardware.
by Bethany
1 person found this helpful
Showing 1-10 of 34 reviews