Internet #308975436

Model #ORB5WL-10

2-1/2 in. Round Lighted Wired Doorbell Push Button, Oil Rubbed Bronze (10-Pack)

  • Lighted doorbell button makes it easier to locate after dark
  • Wired doorbell button replacement with 2.5-in. metal housing
  • Will work with almost any doorbell transformer and wired chime
  • See More Details

Product Overview

Door chime button - 2-1/2 inches round lighted oil-rubbed bronze, 10-pack - use with doorbell chimes, bells and door buzzers. Works great with as a doorbell button replacement. PLEASE NOTE: A diode is needed (not included) if you are using a digital chime (plays a melody; has a speaker for the sound). A diode is not needed is you are using a mechanical doorbell chime (2-Note sound; has a small mallet hitting a metal bar for the sound). Does not include doorbell wire WARNING: This product may expose you to chemicals known to the State of California to cause cancer or reproductive harm
  • Lighted push button makes it easier to locate after dark
  • Plastic button with 2.5 in. round metal housing
  • Drilling may not be required if you are replacing an existing button
  • Will work with most transformers and wired chimes
  • Best used on stucco surfaces
  • Please note: a diode is needed (not included) if you are using a digital chime (plays a melody; has a speaker for the sound), a diode is not needed is you are using a mechanical chime (2-note sound; has a small mallet hitting a metal bar for the sound)

Compare Similar Doorbell Buttons

current product
2-1/2 in. Round Lighted Wired Doorbell Push Button, Oil Rubbed Bronze (10-Pack)
2-1/2 in. Round Lighted Wired Doorbell Push Button, Satin Nickel (10-Pack)Rectangular Lighted Wired Doorbell Push Button, Brass Finish (20-Pack)Round Unlighted Wired Doorbell Push Button Insert, Brass (25-Pack)
BrandNewhouse HardwareNewhouse HardwareNewhouse HardwareNewhouse Hardware
Name2-1/2 in. Round Lighted Wired Doorbell Push Button, Oil Rubbed Bronze (10-Pack)2-1/2 in. Round Lighted Wired Doorbell Push Button, Satin Nickel (10-Pack)Rectangular Lighted Wired Doorbell Push Button, Brass Finish (20-Pack)Round Unlighted Wired Doorbell Push Button Insert, Brass (25-Pack)
Price
$5612
/package
$5688
/package
$7317
/package
$7927
/package
Ratings
(14)
(14)
(5)
(2)
ConnectivityWiredWiredWiredWired
Button ShapeRoundRoundRoundRound
FeaturesLightedLightedLightedLighted
Bell Button Connection TypeWirelessWirelessWirelessWireless
Electrical Product TypeBell ButtonBell ButtonBell ButtonBell Button
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
2.5 in
Product Height (in.)
1 in
Product Width (in.)
2.5 in

Details

Bell Button Connection Type
Wireless
Button Shape
Round
Color Family
Bronze
Color/Finish
Oil Rubbed Bronze
Commercial/Residential
Residential
Connectivity
Wired
Electrical Product Type
Bell Button
Features
Lighted
Included
No Additional Items Included
Mounting Style
Surface Mount
Returnable
180-Day

Warranty / Certifications

Manufacturer Warranty
2 Year Warranty

Questions & Answers

0Questions0Answers

Customer Reviews

  • 14 Customer Reviews
  • 4.4 out of 5 stars overall
86% of customers recommended.
Overall Ratings
5star-icon(7)
4star-icon(5)
3star-icon(2)
2star-icon(0)
1star-icon(0)
Sort By:
Quality :
5
Seeds Program Review
(What's this)
My old doorbell button is all plastic, and it was slowly starting to crack. It was working fine, but I knew it was time for a replacement. The location of the doorbell gets exposed to most of the harsh sunlight, and I am glad I got this new round wired push button is not all plastic, it has Satin Nickel metal on the casing. This material will surely last a long time. It works like a charm, and the installation was quick and easy. I like the clear plastic around the button allow the LED light to shine. Now people can easily see and ring the doorbell at night. It goes perfectly next to my front door, and it is well-made.
Was this helpful?
0
0
A product from Newhouse Hardware this doorbell promises to be a nice looking addition to our fron...
Quality :
4
Seeds Program Review
(What's this)
A product from Newhouse Hardware this doorbell promises to be a nice looking addition to our front entrance. It is a 2-1/2 inch round oil rubbed bronze push button, lighted doorbell meant for a single ring bell only. (Will not work for a chime or melodic doorbell) Easy assembly with a two wire hook up on the back. A pinch bar on the back holds it securely in place to the wall.
Was this helpful?
0
0
This is a clean simple design door bell push button that relies on two spring tabs on the back to...
Quality :
3
Seeds Program Review
(What's this)
This is a clean simple design door bell push button that relies on two spring tabs on the back to hold it against the wall. After connecting the bell wires to the button the two spring tabs will need to be squeezed to gather and pushed into the hole in the stucco where the wire comes out. Seems a bit hit or miss as to how well it will stay put on the wall. The surface on the metal is silver, has a slight texture and a satin (rather than glossy) finish. It's not like the "brushed nickel" finishes you see on plumbing fixture, etc but none the less is fine. The bulb seems to be a regular incandescent rather than an LED, but gives an adequate ring of light around the button so that it can be seen in the dark. For the price it seems a reasonable value. I'm not sure how durable the finish on it is.
Was this helpful?
0
0
Southern Connecticut
Quality :
4
Seeds Program Review
(What's this)
This is a good-looking traditional style lighted doorbell, bright enough that a visitor at night will spot it easily. Nicely finished in polished brass, it features a white plastic lighted button, with a clear plastic mounting ring around it that looks very stylish. It is designed to be mounted in either a new or existing location, and is provided with a spring steel friction clip, no screws required, so it is ideal for an exterior wall finished in Stucco. It will work just as well in wood, brick or masonry. It requires a bored hole at least 1 ½” in diameter to install it. This is a standard two wire pushbutton switch with small Philips head brass screw terminals to attach the wires. In an existing location, as a replacement, you simply disconnect the old doorbell, pulling the wires out just far enough to make the connections, which have no polarity to worry about. Older Doorbells are normally powered by a standard 16-volt transformer located inside in a dry location, which is often on the ceiling in the basement if not wired directly to the chime itself. If you are replacing a non-functioning doorbell, check the power source and the wires at the doorbell itself with a voltmeter, before just assuming it is the doorbell switch that has failed. For use in an existing structure, for example on a door with no existing doorbell, drill no holes before doing a thorough inspection to be sure there are no wall studs or other circumstance that will make it too difficult to run wire inside the wall to the pushbutton, or opt for a wireless model, perhaps for the entire house, where no wiring or connections are required.
Was this helpful?
0
0
Phoenix, Arizona
This is an inexpensive but very usable door bell button. It's not heavy duty, but for our rentals...
Quality :
3
Seeds Program Review
(What's this)
This is an inexpensive but very usable door bell button. It's not heavy duty, but for our rentals, it's excellent. Mounts quickly and has proven relaible here in the heat of the southwest. It goes with any decor and the light really helps at night. We found it also works very well as a garage door opener button, and even as in a senior center, it's a solid bedside alarm. Is it going to last twenty years? No. But at this price, if I replace them all in ten, it's a bargain.
Was this helpful?
0
0
This door bell works great and while not exactly what I expected, it worked out just as well or b...
Quality :
5
Seeds Program Review
(What's this)
This door bell works great and while not exactly what I expected, it worked out just as well or better, than what I planned. I was able to put one at both the front and back door. Installation is simple with just a two wire system and anyone with a little mechanical aptitude should be able to install it. I would order again and would definitely recommend it to anyone needing a doorbell button.
Was this helpful?
0
0
Just an average product. In the trades it is what is referred to as “builder grade” which, loosel...
Quality :
3
Seeds Program Review
(What's this)
Just an average product. In the trades it is what is referred to as “builder grade” which, loosely translated means that it is not of a great quality. These door bells are decently constructed with plenty of average quality and like years of service can be expected. There are no install instruction included with the product which leave the average DIYer wondering. The unit is a friction fit which is nice having a screwless appearance upon installing. Not great as a replacement given how this installs as opposed to many others and compatibility issue that could arise.
Was this helpful?
0
0
The main reason i bought this doorbell was the finish matched my door handle and lock set. Never ...
Quality :
5
Seeds Program Review
(What's this)
The main reason i bought this doorbell was the finish matched my door handle and lock set. Never changed a door bell before so i thought i would give it a shot. What i liked about it was how easy the install was. 2 wires. Switch the 2 wires to the new door bell and tested it. It was on immediately. It attaches with a friction fitting. Thats it. The button light was pretty bright but it showed around the uneven stucco so i pulled it out and added a small bead of caulk to seal it up. Worked great. Happy with my choise and would recommend it.
Was this helpful?
0
0
2-1/2 in. Round Wired Lighted Door Bell Push Button, Satin Nickel has proven to be a highly funct...
Quality :
5
Seeds Program Review
(What's this)
2-1/2 in. Round Wired Lighted Door Bell Push Button, Satin Nickel has proven to be a highly functional door bell button. Unlike to standard rectangular push buttons this device is easier to see from a distance. It is easy to install and accents the porch area very nicely. Overall, I would suggest this push button door bell ringer as a nice replacement or can be used for initial work or rewire. I would suggest this as a dependable choice.
Was this helpful?
0
0
2-1/2 in. Round Wired Lighted Door Bell Push Button, Polished Brass has proven to be a highly fun...
Quality :
5
Seeds Program Review
(What's this)
2-1/2 in. Round Wired Lighted Door Bell Push Button, Polished Brass has proven to be a highly functional door bell button. Unlike to standard rectangular push buttons this device is easier to see from a distance. It is easy to install and accents the porch area very nicely. Overall, I would suggest this push button door bell ringer as a nice replacement or can be used for initial work or rewire. I would suggest this as a dependable choice.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers